Neptune Standalone/Wiegand Mullion Keypad with EM Reader - IP68
The Neptune W1C is a mullion-format access control keypad with a built-in EM 125 kHz card reader. It supports up to 2,000 users and provides a single relay output for standalone door control. With an IP68 rating and a zinc alloy vandal-resistant housing, it is suited to indoor or outdoor installations in domestic or commercial environments.
Key Features
- Mullion keypad design suited to narrow door frames.
- Supports up to 2,000 users.
- Built-in EM Prox 125 kHz card reader.
- Standalone operation with single relay output.
- Card and/or personal identification number access modes.
- Backlit keypad with tricolour light-emitting diode indication and built-in buzzer.
- Fully programmable via the keypad.
- IP68 rated, vandal-resistant zinc alloy housing.
Specifications
- Item Code: ACKPW1C
- User Capacity: 2,000
- Relays: 1
- Card Format: EM Prox 125 kHz
- Stand Alone: Yes
- Personal Identification Number Length: 4-8 digits
- Keypad Layout: 2 x 6
- Keypad Button Type: Push button
- Working Voltage: 12 volt direct current to 24 volt direct current
- Power Input: 12 volt direct current to 24 volt direct current, 12 volt alternating current to 18 volt alternating current
- Lock Output Load: Maximum 2 ampere
- Active Current Draw: Less than 80 milliampere
- Idle Current Draw: Less than 40 milliampere
- Indicators: Tricolour light-emitting diode display
- Anti Tamper: Yes
- Vandal Proof: Yes
- Ingress Protection: IP68
What's In The Box
- 1 x Neptune W1C mullion keypad with built-in EM 125 kHz reader
Cards, cabling, mounting hardware, and door locking hardware are not specified in the supplied product data.
Suitable Uses
- Single door access control for domestic or commercial entries.
- Installations on narrow frames where a mullion keypad format is required.
- Indoor or outdoor locations requiring an IP68-rated keypad.
- Standalone door control where one relay output is sufficient.
Dimensions
Neptune Standalone and Wiegand Keypads - Item Code Family
Frequently Asked Questions
- Can this unit be used as a reader for another controller?
The supplied product data confirms standalone operation and does not confirm Wiegand reader mode for this model. - Is it suitable for outdoor installation?
Yes. The unit is rated to IP68 and is described as suitable for indoor and outdoor use. - What lock types typically suit the relay output?
The lock output load is specified as maximum 2 ampere, but lock selection depends on the lock voltage and current draw, which must be matched to the installation.
Additional Information
- Because this is a mullion keypad, plan cable routing carefully as space in the frame is often limited.
- For outdoor mounting, ensure cable entry points are sealed and avoid installation where water can pool against the housing.
- Manager add and delete function is supported, but the supplied data does not specify card quantities or whether cards are included.
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
