Borg BL4441 MG Pro ECP Mechanical Digital Gate Lock – Lever/Lever Back-to-Back – Marine Grade Pro – Easicode Pro – Black
The Borg BL4441 MG Pro ECP is a fully mechanical Marine Grade Pro digital lock in a back-to-back lever/lever configuration. Both sides of the gate have a full keypad — the correct PIN is required to operate the gate from outside or inside. It is designed for external wooden and timber gates and doors, using the same lever keypad housing as the BL3400 series but supplied with a 60mm anti-thrust tubular latch. Marine Grade Pro construction with 316 stainless steel internal components and MG Pro black coating delivers 1,000 hours of continuous salt spray resistance.
Easicode Pro (ECP) allows the PIN to be changed on the door without removing the lock. Over 4,000 code combinations are available. The lock is fully mechanical, requires no batteries, and accepts doors and gates from 35mm to 80mm thick.
Usually same day if ordered before 11am AEST (excluding weekends and Qld public holidays)
The BL4441 has a full keypad and lever on both the outside and inside of the gate. The same PIN code operates both sides. A code must be entered to open the gate from either direction — there is no free egress from inside without entering the code.
Unlike single-sided models, a code must be entered on the inside keypad to operate the gate. Confirm this suits your application and complies with any applicable fire egress or building regulations before purchasing.
316 stainless steel internal components with MG Pro black marine external grade coating. Tested to 1,000 continuous hours of salt spray. Suitable for coastal, beachside, canal-front, and marine environments.
Borg warrants corrosion resistance for 12 months from date of sale under specified conditions.
The PIN code can be changed while the lock is installed using the included code change key. No lock removal required. An optional code change disabling plug is included to prevent unauthorised code changes once set.
Entirely mechanical. No power source, no wiring, and no battery maintenance at any point.
For heavy duty: consider the Lockwood DX, Borg 7701, or Carbine CDL7000 Series.
The BL4441 MG Pro ECP accepts one active PIN code at a time. The same code operates both keypads.
Installing on a narrow aluminium gate frame?
Planning to mount a Borg BL4441 on an external gate with a 50mm × 50mm (or larger) aluminium frame?
Worried the standard 60mm latch included in the box won't fit?
You're right — it won't.
To fit correctly on aluminium gate frames, you'll need the correct extended latch.
View Compatible Gate Latch (Left & Right Hand Options)Add it to your cart now and avoid delays on install.
Key Features
- Back-to-back lever/lever configuration – keypad and lever on both sides; code required to operate from either side.
- Easicode Pro (ECP) on-door/gate code change – no lock removal required; code change key included.
- Optional code change disabling plug – prevents unauthorised code changes once set.
- Marine Grade Pro (MG Pro) black external coating – 316 stainless steel internal components.
- 1,000 hour continuous salt spray tested; corrosion resistance warranted 12 months.
- Fully mechanical – no batteries, no wiring, no power source.
- Over 4,000 user-defined code combinations; non-sequential entry.
- 60mm backset anti-thrust stainless steel tubular latch.
- No holdback function – both sides always require code entry.
- Reversible on site for left or right hand swing.
- Suitable for wooden and timber gates and doors, 35mm to 80mm thick.
- Medium-heavy duty – designed for light to medium usage external gate and door applications.
What's in the Box
- Borg BL4441 MG Pro ECP outside keypad and lever assembly (MG Pro coating)
- Borg BL4441 MG Pro ECP inside keypad and lever assembly (MG Pro coating)
- 60mm backset anti-thrust stainless steel tubular latch
- Strike plate
- 8mm flat bladed sprung spindle
- M4 stainless steel fixing screws (suits doors up to 80mm thick)
- Easicode Pro code change key
- Optional code change disabling plug
Suitable Uses
- External timber and wooden pedestrian gates requiring controlled access in both entry and exit directions
- Pool gates in coastal, beachside, and marine environments where both-sided access control is required
- Storage areas, plant rooms, and secure outbuilding access requiring marine grade construction and code entry from both sides
- Applications where frequent on-site code changes are needed without removing the lock
- Managed property and strata gates requiring both-directional code control in coastal environments
Full Specifications
Dimensions
Frequently Asked Questions
What is the difference between the BL4441 and the BL4401?
The BL4401 is a single-sided lock – keypad outside, free-turning inside lever. No code is required to exit from inside. The BL4441 is the back-to-back version – both sides have a full keypad, and a code is required to operate the gate from either direction. Choose the BL4401 where you only need to control who enters; choose the BL4441 where you need to control both entry and exit.
Can I use two different codes on each keypad?
No. The BL4441 MG Pro ECP accepts a single PIN code which operates both keypads simultaneously. It is not possible to set different codes on each side.
How do I change the PIN code?
With the gate in the open position, enter the current code. Insert the Easicode Pro code change key into the hole in the * button and hold it fully pressed. Press C to clear the existing code, enter your new code, then press the new code digits once more to confirm. Release the key from *, then press C or rotate the lever to finalise. Test the new code at least five times before closing the gate. The same new code will now operate both keypads.
Is this lock suitable for pool gate compliance in Queensland?
The BL4441 auto-latches when the gate closes, which aligns with the self-latching requirement. However, because a code is required to exit from inside, the lock's inside operation must be assessed against pool safety standards regarding emergency egress. A licensed pool safety inspector should confirm compliance before installation. The BL4401 (single-sided, free inside lever) is more commonly used for pool gate applications where free egress from the pool area is required.
Does this lock work on aluminium gate frames?
The BL4441 is designed for wooden and timber gates. For aluminium frame gates (50mm × 50mm or similar), the standard 60mm tubular latch will not align correctly with the frame. An extended latch (BLS272000) is required. For purpose-built metal box-section gate locks, consider the BL3430 back-to-back series instead.
Additional Information
Unlike the single-sided BL4401, the BL4441 does not have a holdback function. Both sides always require code entry to operate the lever. If you need a holdback for free through-passage during working hours or loading periods, the BL4401 (single-sided) is the appropriate choice, as its inside lever can be held in the open position.
Monthly: clean both keypad and lever surfaces with a light spray of silicon-based lubricant (GT85 or equivalent); remove excess with a soft cloth. Do not use oil-based lubricants. Annually: remove the lock and spray internally through the button holes; test all buttons and the lever. Refer to the Borg Servicing Guide PDF for full maintenance instructions.
The 60mm backset tubular latch is supplied in the box. 50mm and 70mm backset latches are available separately. Confirm the correct backset before installation and order the appropriate latch if required before starting the job.
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled — doing so will invalidate the warranty.
What's In The Box – Borg BL4441MGPROECP
- Borg BL4441 MG Pro ECP outside keypad and lever assembly (MG Pro coating)
- Borg BL4441 MG Pro ECP inside keypad and lever assembly (MG Pro coating)
- 60mm backset anti-thrust stainless steel tubular latch
- Strike plate
- 8mm flat bladed sprung spindle
- M4 stainless steel fixing screws (suits doors up to 80mm thick)
- Easicode Pro code change key
- Optional code change disabling plug
Borg BL4441 MG Pro ECP – Real Installations
Borg BL4441 MG Pro ECP – Dimensions
Borg BL4400 ECP Series – Product Brochure
Borg Locks Warranty – Australia
What is Covered
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What is Not Covered
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled — dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How a Warranty Claim Works
Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor for Borg Locks. If the returned item is found by LSC to be defective, it will be repaired or replaced. Products must be returned to the LSC office with freight charges prepaid within the warranty period. A detailed assessment report is provided to the customer after examination.
Contact Terry’s Locksmiths first — we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside — and does not limit — these statutory rights.
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
