Yale Z-Wave 700 (Gen7) Network Module for Assure Locks - Green
This is the Z-Wave 700 series network module that plugs into a compatible Yale Assure lock. It is not a lock, a gateway, or a hub. If you are looking for a complete keyless lock, see the Yale Assure Keyed Deadbolt, Yale Assure Lock SL, or the Yale Assure Keyed Lever. A compatible Z-Wave hub (such as Samsung SmartThings or Ring) is required separately - this module does not add Wi-Fi, Bluetooth, or Yale Home App control.
The Yale Z-Wave 700 (Gen7) Network Module (YRD-ZWM-2) is the upgraded Z-Wave add-on for the Yale Assure lock range, replacing the discontinued YRD-ZWM-1. It slides into the same module bay as the previous module and gives any compatible Assure lock integration with Z-Wave certified smart home systems - including Samsung SmartThings, Ring, Alarm.com, and any certified Z-Wave controller.
The jump from the 500-series (Gen5) YRD-ZWM-1 to the 700-series (Gen7) YRD-ZWM-2 brings meaningful improvements: Yale cites a 46% increase in wireless range and 20% better battery performance (the module draws power from the host lock's batteries), along with mandatory S2 encryption and SmartStart QR-code provisioning for faster, more secure setup. The module is backward-compatible, so it works inside an existing 500-series Z-Wave mesh without forcing an upgrade of the rest of the network.
Key Features
- Z-Wave 700 series (Gen7) chip - the current generation of Z-Wave technology, succeeding the 500-series Gen5 YRD-ZWM-1
- 46% greater wireless range than the 500-series predecessor, supporting larger homes and longer runs through walls
- 20% improvement in battery efficiency - the module runs off the host lock's batteries; less current draw extends overall lock battery life
- S2 mandatory security - the Z-Wave 700 platform requires S2 (AES-128) encryption on all certified devices; cannot be downgraded to unencrypted pairing
- SmartStart provisioning - scan the module's QR code in a SmartStart-capable hub app for inclusion without placing the lock in manual inclusion mode
- Backward-compatible - works inside an existing 500-series Z-Wave mesh; no need to upgrade every other device on the network
- Same physical format as the YRD-ZWM-1 - slides into the same module bay on all compatible Assure locks, no tools required
- Colour-coded green for identification alongside the red Zigbee module (YRD-ZBM-1) and the white Yale Home Module (YD-MD01)
- No separate power source - draws power from the host lock; no additional batteries or cabling required
Installation
Installation follows the same steps as the earlier module. Remove the host lock's battery cover, lift out any existing module, seat the YRD-ZWM-2 in the module slot, and replace the battery cover. The lock detects the module automatically.
To add to your Z-Wave network (manual inclusion): Put your Z-Wave hub into inclusion mode, then at the lock keypad enter the Master PIN code followed by the inclusion key sequence. The lock will confirm when the module has been enrolled.
SmartStart (700-series feature): If your hub supports SmartStart, scan the QR code printed on the module label before installing it. Once the module is seated, the hub pairs it automatically - no manual inclusion mode required.
The Assure lock's module bay holds one module only. If a Yale Home Module (YD-MD01) or Zigbee module (YRD-ZBM-1) is already fitted, remove it first. You cannot run Z-Wave and Zigbee (or Z-Wave and the Yale Home Module) simultaneously in the same lock.
Which Module Do You Need?
The Yale Assure range supports three different internal modules, each targeting a different smart home setup. Only one can be fitted at a time.
For a detailed comparison of Zigbee and Z-Wave for this lock family, see our Yale Network Modules guide - Zigbee vs Z-Wave.
Fits These Yale Assure Locks
The YRD-ZWM-2 fits into the same module bay as the previous module and is compatible with the Yale Assure locks we stock. Fits the same hosts as the Zigbee module.
What's in the Box
- Yale Z-Wave 700 (Gen7) Network Module - Green (YRD-ZWM-2)
No hub, batteries, or lock included. A compatible Z-Wave certified hub is required separately.
Suitable Uses
- Adding your Yale Assure lock to an existing Z-Wave smart home system (SmartThings, Ring Alarm, Alarm.com, ADT and other certified Z-Wave platforms)
- Replacing a discontinued YRD-ZWM-1 (500-series) module in an Assure lock already integrated with a Z-Wave network
- Upgrading to the 700-series for improved range or more reliable pairing in larger homes or those with concrete or brick walls between the lock and hub
- Installations where a third-party alarm or building management system requires Z-Wave rather than Zigbee
This module does not add Yale Home App, Apple HomeKit, or Bluetooth control. If Yale's own app or Apple HomeKit is the goal, the Yale Home Module (YD-MD01) is the correct choice. For the full range of Yale Assure accessories, visit the Modules and WiFi Gateways category.
Available Finish Options
Green
(This Product)
STK YRD-ZWM-2
The green body is a colour-coding aid for identifying which module is fitted; the module is concealed inside the lock once installed and not visible on the finished door. Finish does not affect functionality or compliance.
Yale Assure Modules and Gateways
Full Specifications
Frequently Asked Questions
Yes. The YRD-ZWM-2 fits the same module bay and is a direct replacement for the discontinued 500-series YRD-ZWM-1. Swap the module out, then re-pair with your hub (the lock will appear as a new device to the hub). Your lock settings are stored in the lock itself and are not affected by the module swap.
Any hub that is certified for Z-Wave Plus v2 (the 700-series platform) will work. Common AU-available options include Samsung SmartThings, Ring Alarm, Alarm.com, and ADT. Older 500-series hubs that support Z-Wave Plus v1 will also pair with this module, though you will not get the full 700-series range benefit on the hub side. Check your hub's Z-Wave certification before purchasing.
No. The Assure lock has a single module bay. Fitting the Z-Wave module displaces any existing module - you can run either Z-Wave or the Yale Home App ecosystem (via the Yale Home Module), but not both. If you need Yale Home App control and Z-Wave integration simultaneously, the Yale Connect Plus Hub 2 can bridge the gap on certain platforms - but that requires the Home Module, not this one.
No. The YRD-ZWM-2 fits only the Assure series module bay (YRD226, YRD256, YRL226). The Unity range uses a different internal architecture and does not have a module bay. For Unity locks, connectivity is provided via the Yale Connect Plus Hub 2.
Additional Information
The 700-series chip delivers a claimed 46% improvement in wireless range and 20% less current draw than the 500-series predecessor. In practice for most residential installations the range difference is rarely the deciding factor - it matters most in larger homes with dense masonry between the lock and hub. The efficiency gain is more universally useful: because the module draws from the lock's batteries, less draw means the lock's batteries last longer. S2 mandatory encryption is a genuine security improvement over the Gen5 optional-S2 approach.
Both the Z-Wave module (this product) and the Zigbee module (YRD-ZBM-1) provide third-party home automation integration for Assure locks - neither adds the Yale Home App. The main practical difference is which hub platform you already have: if your system is Z-Wave (Ring Alarm, many alarm panels), use this module; if it is Zigbee (Amazon Echo with Zigbee hub, some SmartThings configurations), use the Zigbee module. SmartThings supports both protocols, so the module choice there depends on the rest of your device mesh. For a detailed comparison, see our Yale Network Modules guide.
This module operates on the sub-GHz band approved for Z-Wave in Australia and New Zealand under AS/NZS 4268 - 919.8 MHz and 921.4 MHz. It is not compatible with Z-Wave devices tuned for the US 908/916 MHz band or the EU 868 MHz band. Only source Z-Wave devices certified for the Australian market.
Warranty
Genuine Yale products bought new in Australia from authorised retailers are covered against defects in materials and workmanship for:
- Electrical and electronic components: 3 years (batteries excluded)
Yale Warranty
Yale branded products are manufactured and warranted in Australia by ASSA ABLOY Australia Pty Ltd. Coverage is tiered by component type - mechanical parts, electrical and electronic components, and keys each carry their own warranty period. The summary below sets out each period, what is excluded, and how to make a claim through Gold Coast Smart Locks.
This warranty applies to genuine Yale products purchased new in Australia from ASSA ABLOY or its authorised resellers. It operates in addition to your rights under the Australian Consumer Law.
Warranty Summary
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Keep your proof of original purchase (invoice or receipt).
- Contact Gold Coast Smart Locks - operated by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries - as your authorised retailer, and follow the steps on our Returns & Warranty page.
- Return the product securely packed to protect it in transit, together with your proof of purchase and your name, address, email and phone number.
- ASSA ABLOY assesses the claim. Where the warranty applies, they will (at their option) repair the product, replace it with the same or closest equivalent Yale product, or refund the price you paid.
Claims made directly to ASSA ABLOY require a Case Number from their Customer Service Department before goods are returned - products sent back without a Case Number may not be accepted. Costs of returning a product are the customer's responsibility.
What Is Not Covered
- Normal wear and tear.
- Misuse, abuse, accident, or use outside Yale's published technical specifications.
- Improper maintenance or neglect, or failure to follow ASSA ABLOY's care and maintenance recommendations.
- Use of batteries other than those specified; batteries themselves are not covered.
- Unauthorised alteration, modification or repair by anyone other than ASSA ABLOY authorised personnel.
- Custom orders made to components or specifications supplied by someone other than ASSA ABLOY.
- Goods that were not new when purchased, second-hand goods, or products not originally sold in Australia through ASSA ABLOY or an authorised reseller.
- Products with brands, marks, plates, numbers or other ASSA ABLOY information defaced or removed.
- Use of substitute, replacement or non-genuine ASSA ABLOY parts or cylinders.
- Corrosive exposure, including vapours, chemicals, abrasive compounds, contamination, pollution, coastal air, salt spray and high humidity.
- Removal, refitment or replacement of products, and any associated charges.
Important Notes
Batteries are consumable and are not covered. Cosmetic finishes and appearance are excluded. Stainless steel resists staining but is not stain-proof - tea staining is a natural process and is not covered where cleaning and maintenance guidelines have not been followed.
Damage from salt spray, coastal air, high humidity and other corrosives is excluded. In Gold Coast and coastal locations, choose a suitable finish and follow the care and maintenance guidance to protect your hardware and preserve your cover.
Your Rights Under the Australian Consumer Law
This manufacturer's warranty is in addition to other rights and remedies you may have under the law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Further Information
Returns & Warranty - goldcoastsmartlocks.com.au
Download the Yale Warranty (PDF)
Official Yale warranty terms - yalehome.com.au
Manufacturer: ASSA ABLOY Australia Pty Ltd, 235 Huntingdale Road, Oakleigh VIC 3166. Tel: 1300WARRANTY. Email: 1300warranty@assaabloy.com
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
