Zanda Stealth Smart Longplate - 35mm Backset - Mortice
The Zanda Stealth Longplate Smart Lock (Item Code: 1325) is a Bluetooth-enabled mortice lever lock for residential timber and aluminium doors, built on a 35mm backset mortice body. It is a complete smart lock set - lever handles are integrated on both the external keypad panel and the internal back panel, so no separate pull handle or passage set is required. It is managed via the TTLock mobile app (iOS and Android)
and offers Bluetooth, PIN code, RFID card, fingerprint (optional) and mechanical key access. See Chapter 14 - the TTLock Platform Guide.
This 35mm-backset version suits narrower stiles than the 60mm mortice (1326); the lever operates the mortice latch for day-to-day entry while the smart credentials control access, with an auto-lock option to re-secure the door. The lock is IP66-rated for dust and water-jet resistance, making it suitable for external and weather-affected entry doors.
The lock runs standalone via Bluetooth in range; remote access, history review and credential management are available when it is paired with a compatible Zanda Wi-Fi gateway (sold separately). It suits doors 35-65mm thick, is supplied in four finishes, and is covered by the Zanda mechanical warranty (term varies by product and finish - see the Warranty section below).
Available Finish Options
Matt Black
STK 1325.BLK
Brushed Nickel
STK 1325.BN
Graphite Nickel
STK 1325.GN
Satin Brass
STK 1325.SB
Finish selection does not affect functionality, compliance, or performance. All four finishes are variants of this single listing.
Key Features
- Complete lever handle set on a 310mm longplate, operating a 35mm-backset mortice lock body.
- Access methods: Bluetooth app, PIN code, RFID card, fingerprint (optional), and mechanical key override.
- Managed via the TTLock app (iOS and Android) for credentials, access logs, timed codes and e-key sharing.
- Remote access when paired with a compatible Zanda Wi-Fi gateway (STK 1330.-, sold separately).
- Auto-lock and passage modes configurable via the TTLock app.
- Credential capacity: up to 200 fingerprints, 150 passwords and 200 RFID cards.
- PIN lockout after five incorrect consecutive entries (keypad locks for 5 minutes).
- Reversible lever direction; suits narrower stiles via the 35mm backset.
- IP66 rated - suitable for external, weather-affected doors.
- Suits timber and aluminium doors 35-65mm thick.
- Available in four finishes: Matt Black, Brushed Nickel, Graphite Nickel and Satin Brass.
- Backed by the Zanda mechanical warranty (term varies by product and finish - see Warranty).
Access Methods
For how each credential type compares, see Chapter 03 - Access Methods.
Suitable Uses
- Residential front, rear and internal entry doors (timber or aluminium)
- Narrower-stile doors suited to a 35mm backset mortice body
- Doors requiring a complete smart lever set without a separate handle
- External and weather-affected doors (IP66)
- Short-term rental properties requiring time-limited PIN access (see Chapter 07 - Airbnb & Short-Stay and using TTLock for Airbnb)
- Applications where remote access management is required via an optional gateway
What's in the Box
- 1 x front panel (external keypad assembly)
- 1 x back panel (internal lever/handle assembly)
- 1 x mortice lock body (35mm backset)
- 3 x RFID IC cards
- 2 x mechanical keys
- 2 x waterproof rubber plates
- 1 x U-clip
- 1 x strike and strike box
- 1 x user manual
- 60mm and 80mm square shafts
- Fixing hardware: screw stubs (M5x35mm), sliding screws (M5x11mm), screws for timber (M4x20mm) and aluminium (M5x10mm) doors, and assorted fixing screws (M5x25 / 30 / 40 / 50 / 70mm)
Zanda Stealth Smart Range - Item Code Family
The Stealth range shares one app, credential set and optional Wi-Fi gateway, differing mechanically in body style, backset and installation method. This 1325 is the 35mm mortice longplate; the 1326 is the 60mm mortice version, the 1327 is the tubular-latch longplate, and the 1320 is a bolt-only deadbolt. If backset or door thickness is a live decision, see Chapter 02 - Measuring Your Door.
Accessories & Spares
- Zanda Stealth Electronic Lock Gateway / Wi-Fi Bridge (STK 1330.-) - the optional Wi-Fi bridge that adds remote access, remote credential management and remote history review. Without it the lock still runs fully via Bluetooth, PIN, card, fingerprint (if fitted) and key. See do you need a gateway?
- 4 x AA batteries - required to power the lock; not supplied. Use quality alkaline cells.
Full Specifications
Dimensions
Battery, Power & Backup Access
- Powered by 4 x AA batteries - not included; install before commissioning.
- Batteries sit in the internal (back panel) compartment; slide the cover to open.
- Low battery alerts are provided through the TTLock app and the lock indicators.
- Mechanical key override provides physical backup entry - see where the keyhole is on smart locks.
- Use quality alkaline batteries for best life; carry spares for coastal or high-use doors.
Remote App Access (Optional - Gateway Required)
The Stealth longplate communicates via Bluetooth. Within range the TTLock app provides full management. Remote access from outside Bluetooth range requires the compatible Zanda Stealth Electronic Lock Gateway / Wi-Fi Bridge (sold separately) on your home Wi-Fi. For what a gateway adds see Chapter 08 - Gateway Comparison; if a bridge drops off Wi-Fi, our fixes guide helps.
Without a gateway the lock runs fully standalone using Bluetooth (in proximity), PIN, RFID card, fingerprint (if fitted) and mechanical key.
Frequently Asked Questions
No. The Stealth Longplate is a complete lock set with lever handles on both the external and internal panels - no separate pull handle or passage set is required. See Chapter 01 - mortice lever locks.
Backset is the distance from the door edge to the centre of the lock spindle. This 1325 uses a 35mm backset (suited to narrower stiles); the 1326 uses a 60mm backset. Externally the longplate is identical. See how to measure backset.
No. It uses Bluetooth. Remote access needs the Zanda Stealth Wi-Fi gateway bridging the lock to the TTLock app. Chapter 08 explains what a gateway adds.
The lever direction on both panels is adjustable before installation - loosen the inner hex screw, remove and re-seat the handle, then re-tighten; the square shaft is set to suit door thickness and handing. See determining door handing and Chapter 02 - handing.
After five wrong entries in a row the keypad locks out for 5 minutes. The door can still be opened with an RFID card, fingerprint (if fitted) or mechanical key during that time. See how PIN access works.
Yes - timber and aluminium. The kit includes separate screws for each door type and waterproof rubber plates on both faces. See Chapter 04 - Door Type Compatibility.
Additional Information
The 1325 incorporates lever handles on both panels and operates the mortice latch directly, so it is the primary door hardware. Where a heavier security throw is wanted, a separate deadbolt can be specified alongside - see what a mortice lever lock is and secondary locks and the one-penetration principle.
Set the lever to match the door open direction during installation, and fit the correct square shaft (60mm or 80mm supplied) for the door thickness. Confirm the open direction before drilling - Chapter 02 - handing.
IP66 confirms the lock is dust-tight and resistant to powerful water jets from any direction, suiting external and weather-affected doors. It is not fully submersible - avoid direct immersion. See Chapter 11 - IP ratings, and for coastal longevity the realities of electronic door locks.
All new Zanda Stealth locks ship with a default TTLock password of 123456 - change it immediately after installation. The lock is added to the app via Bluetooth, which must be enabled during pairing. See the TTLock app user manual and Chapter 14.
For reliable enrolment, ensure fingers are clean and dry. Each fingerprint can be given a start and end time for time-limited access. If the sensor is unresponsive it should still beep when pressed; if not, check the wire between the front and back panels. More on fingerprint access.
Backed by the Zanda mechanical warranty against manufacturing defects in materials and workmanship under normal domestic use. Warranty length varies by product and finish - see the Zanda Warranty document for the term that applies to this item. Proof of purchase required for all claims. Zanda Warranty · Returns & Warranty
Zanda Stealth 1325 / 1326 - Longplate Mortice User Manual
What's in the Box - Zanda Stealth 1325
- 1 x front panel (external keypad assembly)
- 1 x back panel (internal lever/handle assembly)
- 1 x mortice lock body (35mm backset)
- 3 x RFID IC cards
- 2 x mechanical keys
- 2 x waterproof rubber plates
- 1 x U-clip
- 1 x strike and strike box
- 1 x user manual
- 60mm and 80mm square shafts
- Fixing hardware: screw stubs (M5x35mm), sliding screws (M5x11mm), screws for timber (M4x20mm) and aluminium (M5x10mm) doors, and assorted fixing screws (M5x25 / 30 / 40 / 50 / 70mm)
Zanda Stealth Smart Longplate 1325 - Real Installations
Installation photos of the Zanda Stealth longplate (the 1325 35mm and 1326 60mm mortice share the same external longplate and finishes).
Zanda Stealth Smart Longplate 1325 - Dimensions
Zanda Stealth Smart Longplate 1325 / 1326 - Spec Sheet & User Manual
Zanda Stealth 1325 / 1326 - Longplate Mortice User Manual
Zanda Warranty
Zanda Architectural products carry a limited warranty against defects in material or workmanship under normal use during the warranty period. During the warranty period, Zanda Architectural will repair or replace the product (or the defective parts) at no charge, using new or refurbished replacement parts. Warranty periods vary by product range and by component (mechanical and finish), so please check the row that matches your product below.
Warranty Summary
* Warranty periods run from the proven date of purchase and apply only when the product is properly installed and subjected to no more than fair wear and tear. See the exclusions and important notes below for full conditions.
How to Make a Claim
Zanda's warranty process starts with the reseller you purchased from. As your place of purchase, we handle the claim for you:
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (the place of purchase) with your proof of purchase and the date the product was purchased.
- Provide a clear description of the fault, along with the product range and model.
- We complete the necessary claim forms and process the claim with Zanda Architectural on your behalf. You may be asked to return the product for assessment.
- If the product is found to be defective under the warranty terms, Zanda will repair or replace it at no charge, using new or refurbished parts.
Exclusions
A warranty claim cannot be accepted for damage unless it resulted from a defect in Zanda's materials and workmanship. The following are expressly excluded:
- Surface damage occurring after purchase and not caused by defects in materials and workmanship.
- Misuse, neglect or accidental damage.
- Failure to maintain and care for the product.
- Defects or damage caused by using the product for a purpose other than that for which it was designed, such as commercial use.
- Defects or damage caused by improper installation.
- Damage caused by batteries.
- Modification and/or alteration to the product.
- Discolouration and scratches to finishes through normal use and ageing.
- Replacement of batteries.
- Normal wear and tear.
This guarantee does not extend to labour costs, freight, personal loss, death or injury, or economic, consequential or property damage of any kind. The warranty also excludes extreme environments where heat, weather and salty conditions are prevalent, and does not cover products that have not been properly maintained.
Important Notes
The products covered by this warranty are designed for residential use only - any other use (including commercial use) voids the warranty. This is a parts-only warranty: it does not cover labour costs for product removal and reinstallation.
Proper maintenance, care, cleaning and polishing in accordance with Zanda's instructions are essential to retain a product's finish - particularly soft finishes or finishes that naturally age, such as Brushed Nickel, Satin Chrome, Polished Brass, Graphite Nickel, Matt Chrome, Unlacquered Brass, Matt Brass, Rumbled Brass, Roman Brass, Natural Bronze, Oil Rubbed, Satin Brass, Brushed Bronze, Antique Bronze, Buffed Bronze, Matt Antique Bronze, Venetian Bronze and Powdercoat. These finishes are subject to deterioration, corrosion and oxidation from conditions such as salt deposits, scratches from sharp objects, paint thinners and caustic agents. For care of stainless steel products, see the ASSDA guidance on preventing coastal corrosion and tea staining.
This is a limited, express warranty and is provided in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. Nothing in this express warranty limits or restricts any other statutory right or remedy available to you.
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
