Borg BLS216 Digital Lock Latch - 60mm Backset - Suits 2000 and 4000 Series - Satin Chrome
The Borg BLS216 is the 60mm latch for the Borg 2000 and 4000 Series mechanical digital locks. It is a tubular deadlatching latch with a 60mm backset, which is the standard Australian door preparation.
It is supplied as a latch only - a direct replacement for a worn or damaged Borg latch, finished in satin chrome to match the original.
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- Tubular deadlatching latch for Borg 2000 and 4000 Series digital locks.
- 60mm backset - the standard Australian door preparation.
- Direct replacement for the original Borg latch assembly.
- Satin chrome faceplate finish.
- Supplied as a latch only.
What's in the Box
- 1 x Borg tubular deadlatching latch, 60mm backset (satin chrome)
Suitable Uses
Use this latch to replace a worn or damaged latch on a Borg 2000 or 4000 Series digital lock where the door is prepared for the standard 60mm backset. It is one of our tubular latches for digital locks. For narrow gate frames, the 28mm narrow-stile latch is the alternative.
Available Finish Options
Satin Chrome
(This Product)
STK BLS216
Finish selection does not affect functionality, compliance, or performance.
Item Code Family - Borg Digital Lock Latches
Compatibility - What This Fits
This 60mm latch fits the Borg 2000 and 4000 Series knob and lever locks - the locks we match it to are listed below. It is the standard-backset option; a 50mm latch suits shallower door edges and a 70mm latch suits wider stiles. For a corrosion-resistant version, see the stainless steel 60mm latch.
Not sure which backset your door is cut for? See measuring your lock backset, and latch versus bolt on mechanical digital locks for how the latch works. If your gate stile is too narrow for a 60mm latch, read gate post too narrow for a 60mm latch.
Full Specifications
Frequently Asked Questions
60mm - the standard Australian door preparation. If your door is cut for a different backset, use the 50mm or 70mm latch. See measuring your lock backset.
Yes - it is the standard 60mm latch for both the Borg 2000 and 4000 Series knob and lever locks.
No - this is the latch only. The strike plate and box keeper is a separate part.
A fire rating belongs to the complete doorset and lock assembly as tested, not to a replacement latch on its own. If your opening is a fire door, confirm the rating of the whole assembly before servicing it.
Additional Information
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Borg's installation and code change manual for the 2000 Series knob keypad locks this latch suits - parts list, handing, door preparation, latch and strike fitting.
Borg's one-page Light Duty 2000 Series leaflet - the 60mm tubular latch is standard, with 50mm and 70mm available and a 28mm narrow-stile ali-latch.
Borg's one-page 4400 Series brochure for the 4000 Series gate locks - the 4401 and 4441 are supplied with a 60mm tubular latch, with 50mm and 70mm available.
Borg's one-page maintenance guide for its mechanical digital locks - a monthly clean with a light silicone-based lubricant, and a yearly service with the lock off the door that takes in the latch and fixings.
PDF Files - BLS216
Borg's installation and code change manual for the 2000 Series knob keypad locks this latch suits - parts list, handing, door preparation, latch and strike fitting.
Borg's one-page Light Duty 2000 Series leaflet - the 60mm tubular latch is standard, with 50mm and 70mm available and a 28mm narrow-stile ali-latch.
Borg's one-page 4400 Series brochure for the 4000 Series gate locks - the 4401 and 4441 are supplied with a 60mm tubular latch, with 50mm and 70mm available.
Borg's one-page maintenance guide for its mechanical digital locks - a monthly clean with a light silicone-based lubricant, and a yearly service with the lock off the door that takes in the latch and fixings.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
