Skip to main content

FORGE H1 Frameless Glass Door Handle Smart Lock - Fingerprint, WiFi, Tuya App

Forge

Terry's Online Price $517.33
(No reviews yet) Write a Review
SKU:
STK FEGLHDLG6A
UPC:
521385125775
Availability:
Usually Ships in 24 Hours
Access Method:
App Enabled
Access Method:
Bluetooth
Access Method:
WiFi
Access Method:
Pin Code
Access Method:
Fob/Card/RFID
Access Method:
Has Backup Key
Access Method:
Fingerprint
Colour/Finish:
Black
Feature:
Frameless Glass
Feature:
Built-In WiFi
Feature:
Double/French Door Partners
Type of Handle:
Lever
Type of Lock:
Deadbolt
atc-product:
10802
atc-product:
10801
atc-product:
10790
Adding to cart… The item has been added
FORGE Logo

FORGE H1 Frameless Glass Door Handle Smart Lock - TUYA Wi-Fi

At A Glance

At A Glance
FingerprintFingerprint PIN codePIN Code RFID cardRFID Card Forge Smart (Tuya) app over Wi-FiForge Smart (Tuya) App
(Wi-Fi)
Remote unlock on a bell pressRemote Unlock
(On Request)
Optional remote controlRemote
(Optional)
Mechanical keyMechanical Key Face recognition - not availableFace / Palm
Not Available

The FORGE H1 Frameless Glass Door Handle Smart Lock (FEGLHDLG6A) is a retrofit handle lock for frameless glass office and partition doors. It goes into the two 45 mm holes of a traditional glass door lock, so no new cut-outs are needed, and it suits glass 8-12 mm thick on inward-opening doors only.

It opens with a fingerprint, a PIN code, an M1 or IC card, the Forge Smart (Tuya) app or a mechanical key. Wi-Fi is built in - it joins your 2.4 GHz network with no gateway, and remote unlock answers a bell press at the door. An optional remote and optional parts for glass-to-glass double doors are available, and it runs on 4 x AA batteries for up to about 12 months.

This is the FORGE glass door H1 - a different product from the FORGE H1 gate lock. For the same handle format on Bluetooth, see the FORGE H2 glass lock. Made in China for FORGE, an Australian brand based in Ringwood, Victoria. Backed by a 2-year manufacturer warranty.

Dispatch
Estimated Dispatch
Usually ships in 24 hours.
About FORGE
Owned by FORGE Electrical (Australia) · Manufactured in China. Our independent FORGE brand profile sets out how the range compares with the other brands we stock.

Access Methods

Access Method Available Details
Fingerprint Yes Semiconductor reader on the outside panel - it reads in 0.3 seconds or less. We don't have a fingerprint capacity figure for the H1.
PIN Code Yes Touch keypad on the outside panel; passwords are 6-14 digits, ended with #.
RFID Card Yes M1 and IC cards - RFID cards and fobs.
Forge Smart (Tuya) App Yes - Wi-Fi Users, temporary passcodes and the access log in the Forge Smart (Tuya) app.
Remote Unlock On request Someone at the door presses the bell, the app receives an unlock request, and you tap to open - Forge Smart (Tuya) remote unlock answers a request at the door rather than opening on demand.
Remote Control Optional The glass door lock remote is sold separately - the H1 is among the locks it suits.
Mechanical Key Yes Emergency key slot on the lock - the backup if the batteries go flat.
Face / Palm Vein Not Available The H1 has no camera - for face and palm vein on frameless glass, see the FORGE G4.

From inside, the handle opens the door. Until an administrator is registered, any fingerprint, code or card opens the lock - register one as soon as it is fitted.

Forge Smart (Tuya) App

Tuya logo

Set the H1 up in the Forge Smart (Tuya) app, for iOS and Android iOS App StoreAndroid Google Play. Register an administrator on the keypad first: touch to wake the screen, press # and add an administrator user with a password, fingerprint or card (leaflet page 2). Then switch the lock's wireless device on from the System settings menu - the 0 flashes and you have 90 seconds to add the lock in the app. The H1 needs a 2.4 GHz network; 5 GHz is not supported (Tuya pairing sheet).

Tuya
Wi-Fi built in - remote unlock on request
Wi-Fi is built into the H1 glass lock, so there is no gateway to buy for remote access. Remote unlock works on request: someone at the door presses the bell, the app receives an unlock request, and you tap to open the door (Tuya pairing sheet, page 2). Forge Smart (Tuya) locks do not unlock on demand from off-site, have no scheduled passage mode in the app and no Alexa or Google, and have no API. Online and offline passwords, entry records, notifications and Tuya automations work from the app - see the Forge Smart (Tuya) platform in Chapter 15. Temporary passwords - 7 digits, with a start and end time - can be created and shared from the app.

Which platform suits you is set out in our TTLock vs Tuya comparison and which smart lock platform is right for you. For a frameless glass lock with no cut-outs and a TTLock version with a gateway, see the FORGE G3.

Key Features

  • Retrofit handle lock for frameless glass office and partition doors - fits the two 45 mm holes of a traditional glass door lock, so nothing new is cut.
  • Fingerprint (semiconductor reader), PIN code, M1 / IC card, the app and a mechanical key.
  • Wi-Fi built in on Forge Smart (Tuya) - remote unlock answers a bell press at the door; users, temporary passcodes and the access log in the app.
  • Optional hand-held remote and optional glass-to-glass parts for double doors.
  • Automatic or manual locking, an always-unlocked mode and an adjustable unlock hold time; voice prompts and a low-battery warning.
  • Angled blade latch driven by a motor with clutch protection; a stop piece moves the lock back 4 or 8 mm to suit the gap.
  • ABS, zinc alloy and aluminium alloy body, 2.2 kg; left or right hand by turning the lock through 180 degrees.
  • 4 x AA alkaline batteries for up to about 12 months, with a micro USB emergency power port - what happens when the battery dies.
  • For frameless glass doors - one of our app-enabled smart locks.

What's in the Box

FORGE H1 Frameless Glass Door Handle Smart Lock
  • Outside unit - keypad, fingerprint reader, card area and handle
  • Inside unit with handle and battery compartment
  • Fixed blade (strike) for the fixed panel or frame
  • Small square shaft, iron fixing plate and screws
  • Mechanical keys
  • User leaflet

Batteries (4 x AA) are not listed. The glass-to-glass parts and the remote are sold separately.

Suitable Uses

  • Frameless glass office, boardroom and partition doors that open inward, with glass 8-12 mm thick (frameless glass door smart locks).
  • Replacing a traditional glass door lock that already has two 45 mm cut-outs - no new holes.
  • Glass-to-frame and glass-to-wall layouts; glass-to-glass double doors with the dual-opening parts.
  • Offices that want app control and an access log without buying a gateway (audit trails).
Not suitable for
  • Doors that open outward - the H1 is rated for inward-opening doors only.
  • Glass without the two 45 mm cut-outs - the G3 and G4 clamp on with no cut-outs.
  • Glass thinner than 8 mm or thicker than 12 mm, or a door seam outside 3-15 mm.
  • Doors exposed to the weather - the H1 has no IP rating.
  • 5 GHz-only Wi-Fi - the H1 needs a 2.4 GHz network.
  • Sites that need on-demand remote unlock, scheduled passage mode or Alexa / Google - choose a TTLock model with a gateway.

Door Fit - Cut-Outs, Glass and Opening Direction

Choose your glass door configuration at checkout. The H1 comes as a Glass-to-Frame/Wall Setup or a Glass-to-Glass/Dual Opening Setup; the glass-to-glass setup adds the parts for the second leaf, also listed on their own as the FORGE glass-to-glass dummy lock for the H1.

The H1 is a retrofit: it replaces a traditional glass door lock in the same two holes, so it needs those cut-outs to be there already. The requirements are below.

Check before you order
  • Inward-opening doors only - the H1 is not rated for doors that open outward.
  • Glass thickness - 8-12 mm (measuring door thickness).
  • Door seam - 3-15 mm between the glass door and the fixed panel, wall or frame.
  • Cut-outs - two 45 mm holes: the first centred 60 mm from the door edge, the second 63-65 mm further along.
  • Handing - left or right: the whole lock turns through 180 degrees (leaflet page 2).
  • Latch position - the stop piece moves the lock back 4 or 8 mm from its default position (leaflet page 1).
  • Not sure? Send us a photo of both sides of the door and the gap (helpful photo examples) and we will check the fit with you.
FORGE H1 glass lock cut-out requirements - two 45 mm holes, the first centred 60 mm from the door edge and the second 63-65 mm further along, 8-12 mm glass, inward-opening doors only, 3-15 mm door seam
Cut-out requirements: two 45 mm holes 60 mm and 63-65 mm along from the door edge, 8-12 mm glass, a 3-15 mm door seam and inward-opening doors only.

Available Finish Options

  • Black
    Black
    (This Product)
    STK FEGLHDLG6A

FORGE Frameless Glass Door Smart Locks

Image Model Item Code Type App Platform Glass Thickness
FORGE G3 frameless glass door smart lock - TTLock version FORGE G3 - TTLock version FEGLFFKEYG9TA Clamps on, no cut-outs TTLock (Bluetooth; gateway for remote) 8-15 mm (39 mm with bracket)
FORGE G3 frameless glass door smart lock - Forge Smart (Tuya) version FORGE G3 - Forge Smart (Tuya) version FEGLFFKEYG9A Clamps on, no cut-outs Forge Smart (Tuya), Wi-Fi 8-15 mm (39 mm with bracket)
FORGE G4 frameless glass door video doorbell smart lock FORGE G4 video doorbell glass lock FEGLG16VDA Clamps on, no cut-outs - video doorbell, face and palm vein Forge Smart (Tuya), Wi-Fi 8-12 mm (39 mm with bracket)
FORGE H1 frameless glass door handle smart lock FORGE H1 glass door handle lock (this product) FEGLHDLG6A Handle lock in existing glass-lock cut-outs - inward-opening doors Forge Smart (Tuya), Wi-Fi 2.4 GHz 8-12 mm
FORGE H2 frameless glass door handle smart lock FORGE H2 glass door handle lock FEGLHDLG7A Handle lock in existing glass-lock cut-outs - inward-opening doors Tuya (Bluetooth; gateway for remote) 8-15 mm

This product is the bold row. The H1 and H2 glass handle locks are different products from the FORGE H1 gate lock and the FORGE H2 slimline aluminium lock. See all our frameless glass door smart locks.

Accessories and Spares

Image Accessory Item Code Use With This Lock
FORGE glass-to-glass dummy set fitted with the H1 glass lock FORGE Glass-to-Glass Dummy Lock for H1 FEGLHDLG6DMY Parts for a glass-to-glass or dual-opening setup - the Glass-to-Glass/Dual Opening Setup option at checkout.
FORGE remote control for frameless glass door smart locks FORGE Remote Control for Frameless Glass Door Locks FESHGLPNLKRM The optional hand-held remote - the H1 glass lock is among the locks it suits.
FORGE Zigbee 3.0 and Bluetooth dual mode gateway - white FORGE Zigbee 3.0 and Bluetooth Dual Mode Gateway FESMBTZGBDGTWYA Optional Tuya hub. The H1 glass lock has Wi-Fi built in, so it needs no gateway for remote access; add this gateway to run Bluetooth-only FORGE Tuya locks, or other Zigbee 3.0 and Bluetooth Tuya devices, alongside it.
FORGE Zigbee 3.0 and Bluetooth gateway with IR control - black FORGE Zigbee 3.0 and Bluetooth Gateway with IR Control FESMBTZGBIRGTWA The same optional hub with infrared control added - TVs, air-conditioners and other infrared appliances from the app, alongside the lock.

No gateway is needed - Wi-Fi is built in; the two Tuya gateways are optional hubs for the rest of a Tuya setup. Other credentials are in our RFID fobs, tags and cards range.

Battery and Emergency Power

Power, warnings and backup
The H1 runs on 4 x 1.5 V AA alkaline batteries - they are rated at up to about 12 months, depending on use - and draws less than 10 microamps standing by. It gives a voice warning when they run low. If they go flat, power the lock from its micro USB emergency port with a power bank and open it normally, or use the mechanical key. More on what really affects battery life and power and battery FAQs.

Weather and Environment - Indoor Glass Doors

Weather rating
No IP rating given
The H1 glass lock has a working range of -20 to 60 degrees C but no IP rating, and it is made for office and partition glass doors. Treat it as an indoor lock (IP ratings explained).

FORGE H1 glass lock - Technical Specifications

Brand FORGE (FORGE Electrical, Ringwood VIC)
Item Code FEGLHDLG6A
Model H1 frameless glass door handle lock (not the FORGE H1 gate lock)
Product Type Retrofit smart handle lock for frameless glass doors
Origin Owned by FORGE Electrical (Australia) · Manufactured in China
App Platform Forge Smart (Tuya) app
Connectivity Wi-Fi built in (2.4 GHz only) - no gateway
Remote Unlock On request - a bell press at the door, approved in the app
Access Methods Fingerprint, PIN code, M1 / IC card, app, optional remote, mechanical key
Fingerprint Reader Semiconductor, 0.3 seconds or less
Passcode Length 6-14 digits
Card Types M1, IC
Glass Thickness 8-12 mm
Door Seam 3-15 mm
Cut-Outs Needed Two 45 mm holes - 60 mm from the door edge, then 63-65 mm apart
Opening Direction Inward opening only; left or right hand (turn the lock through 180 degrees)
Dimensions 235 x 65 mm; handles 70 mm from the glass on each side; 24 mm panels
Material ABS, zinc alloy and aluminium alloy
Weight 2.2 kg
Power 4 x 1.5 V AA alkaline batteries
Battery Life Up to about 12 months
Standby Current Less than 10 microamps
Emergency Power Micro USB
Working Temperature -20 to 60 degrees C
Finish Black
Warranty 2 years

Dimensions

FORGE H1 glass door handle lock dimensions - 235 mm long including a 14 mm latch, 200 mm body, 65 mm high, 70 mm from the glass on each side, 24 mm panels
Dimensional drawing of the H1 glass lock: 235 mm long (a 200 mm body plus the latch), 65 mm high, each handle standing 70 mm from the glass on panels 24 mm deep.

Check the glass thickness (8-12 mm), the 3-15 mm seam, the two existing cut-outs and the opening direction - see Door Fit above.

Installation

The H1 goes into the existing holes of a traditional glass door lock: the outside unit's cable passes through the glass, an iron plate is fixed over it, and the inside unit closes over the plate. The installation steps in the leaflet show each stage.

Installation Tips
  • Take the inside (rear) panel off by removing the four screws on its side.
  • Pass the outside panel's cable through the hole in the glass and fix the iron plate with its four screws.
  • Connect the cable, insert the small square shaft with its arrow pointing towards the latch, refit the inside panel and its four side screws.
  • Close the door, mark the blade position and fit the fixed blade on the fixed panel or frame - misalignment is the usual cause of a latch that will not catch.
  • To change hands, turn the whole lock through 180 degrees; the stop piece moves the latch back 4 or 8 mm if the gap needs it.
  • Terry's offers installation across the Gold Coast.

After fitting, register an administrator straight away - until then any fingerprint, code or card opens the lock.

Frequently Asked Questions

Does the H1 need new holes in the glass?
No - it fits the two 45 mm holes of a traditional glass door lock, 60 mm from the door edge and 63-65 mm apart. Glass without those cut-outs suits the G3 or G4, which clamp on.
Will it suit an outward-opening door?
No - the H1 is rated for inward-opening doors only. It can be set up for a left or right hand by turning it through 180 degrees.
Do I need a gateway?
No - Wi-Fi is built in, so the H1 needs no gateway for remote access; the FORGE Tuya gateways are optional hubs. It needs a 2.4 GHz network, and remote unlock answers a bell press at the door.
Can it go on a pair of glass doors?
Yes - choose the Glass-to-Glass/Dual Opening Setup at checkout; it adds the parts for the second leaf.
What powers it?
4 x AA alkaline batteries for up to about 12 months, with a micro USB emergency port and the mechanical key as backups.

Additional Information

  • Register an administrator straight away. Until then any fingerprint, code or card opens the H1.
  • Check the cut-outs first. Two 45 mm holes, 60 mm and 63-65 mm along - and the door must open inward.
  • Use a 2.4 GHz network. 5 GHz is not supported - see band steering if your router merges its bands.
  • Remote unlock is a request. Someone presses the bell at the door, and you approve it in the app.
  • Not the H1 gate lock. There is also an H1 outdoor gate lock - a different product.

Warranty

Warranty
Warranty
2-year FORGE warranty from the date of delivery - covers defects in materials and workmanship under normal use. Excludes improper installation or maintenance, misuse, accident, normal wear and tear (including fading or dulling of finishes) and water damage beyond the product's rated IP protection. Proof of purchase required for all claims. Returns & Warranty | FORGE warranty terms

Download PDF Resources

FORGE H1 Frameless Glass Door Handle Smart Lock - User Leaflet (PDF)
Two-page leaflet for the H1 glass lock - specifications, the panel layout and dimensions, the door-hole chart, latch adjustment with the stop piece, installation and the keypad menus.
Tuya Smart App Pairing Guide (Wi-Fi locks) (PDF)
A generic two-page pairing sheet for Tuya Wi-Fi locks - pairing mode, 2.4 GHz Wi-Fi, remote unlock on a bell press and 7-digit temporary passwords. Its screens show the Tuya Smart app; this lock's app is Forge Smart (Tuya).
FORGE Logo

FORGE H1 Frameless Glass Door Handle Smart Lock - FAQ, Setup and Owner's Guide

Everything below is here to help you choose, fit, set up and live with the FORGE H1 glass lock. For general smart lock questions see our Smart Lock FAQ (Chapter 13), and for measuring and fitting the Buyer's Guide.

Choosing a FORGE Glass Door Lock

How does the H1 compare with the other FORGE glass locks?
The H1 and H2 are handle locks that go into existing glass-lock cut-outs on inward-opening doors - the H1 has Wi-Fi built in, the H2 talks Bluetooth. The G3 and G4 clamp on with no cut-outs; the G4 adds a video doorbell, face and palm vein recognition.
Is this the same H1 as the gate lock?
No - the name H1 is used for two products. This is the frameless glass door handle lock; the H1 gate lock is an outdoor double-sided gate lock.

Glass, Cut-Outs and Fitting

What cut-outs does it need?
Two 45 mm holes, the first centred 60 mm from the door edge and the second 63-65 mm further along - the holes a traditional glass door lock already uses.
What glass thickness and gap does it suit?
Glass 8-12 mm thick, with a 3-15 mm seam between the door and the fixed panel, wall or frame.
Can it go on a door that opens outward?
No - it is for inward-opening doors only.
How do I change the hand?
Turn the whole lock through 180 degrees (leaflet page 2). See how to tell which way your door opens.
The latch does not reach the strike - can it be adjusted?
Yes - turn the stop piece to move the lock back 4 or 8 mm from its default position (leaflet page 1).
How do I set it up on two glass doors?
Choose the Glass-to-Glass/Dual Opening Setup at checkout, which adds the parts for the second leaf.

Forge Smart (Tuya) App and Wi-Fi

Which app does it use?
The Forge Smart (Tuya) app. The Tuya pairing sheet shows the Tuya Smart app - the same platform under FORGE branding.
Why will it not join my Wi-Fi?
It needs a 2.4 GHz network - 5 GHz is not supported, and the 90-second pairing window starts when the 0 flashes. If your router merges its bands, see band steering.
How does remote unlock work?
Someone at the door presses the bell; the app receives an unlock request and you tap to open. It does not unlock on demand without someone at the door.
Can I send a guest a temporary code?
Yes - create a 7-digit temporary password in the app with a start and end time, and share it (Tuya pairing sheet, page 2).
Can I see who came in?
Yes - the app keeps an access log; the keypad menu also has a record query.

Platform and Data

Which platform does the H1 glass lock run on, and where is my data held?
The H1 glass lock runs on the Forge Smart (Tuya) app, with Wi-Fi built in - it joins your 2.4 GHz network directly, with no gateway. Remote unlock answers a bell press at the door. Tuya is a Chinese company headquartered in Hangzhou with regional data centres; Tuya provisions Australian accounts to its Central Europe data centre, and there is no Australian data centre. The region the Forge Smart (Tuya) app uses for Australian accounts is being confirmed. For the platform-by-platform picture see where each smart lock platform hosts its data, and for how Tuya compares with TTLock data sovereignty in our TTLock vs Tuya comparison.

Credentials and Lock Modes

How do I get a fingerprint to register reliably?
Press the finger firmly on the reader several times when prompted, moving it slightly each time. The semiconductor reader copes with wet and dry fingers, but register the same finger twice for older users.
Which cards does it read?
M1 and IC cards.
Can it lock itself, or stay open?
Yes - set automatic or manual locking and the unlocking hold time (00-99) in the System settings menu, or use the always-unlocked mode during business hours.
Can I add a hand-held remote?
Yes - the glass door lock remote is an option for the H1.

Power and Batteries

How long do the batteries last?
Up to about 12 months on 4 x AA alkaline cells, depending on use.
What if the batteries go flat?
Power the lock from the micro USB emergency port with a power bank and open it normally, or use the mechanical key.

Related Products, Guides and Chapters

FORGE Logo

What's in the Box - FORGE H1 Frameless Glass Door Handle Smart Lock

  • Outside unit - keypad, fingerprint reader, card area and handle
  • Inside unit with handle and battery compartment
  • Fixed blade (strike) for the fixed panel or frame
  • Small square shaft, iron fixing plate and screws
  • Mechanical keys
  • User leaflet
Batteries (4 x AA) are not listed. The glass-to-glass parts and the remote are sold separately.
FORGE Logo

FORGE H1 Frameless Glass Door Handle Smart Lock - Dimensions

FORGE H1 glass door handle lock dimensions - 235 mm long including a 14 mm latch, 200 mm body, 65 mm high, 70 mm from the glass on each side, 24 mm panels
Dimensional drawing of the H1 glass lock: 235 mm long (a 200 mm body plus the latch), 65 mm high, each handle standing 70 mm from the glass on panels 24 mm deep.
FORGE H1 glass lock cut-out requirements - two 45 mm holes, the first centred 60 mm from the door edge and the second 63-65 mm further along, 8-12 mm glass, inward-opening doors only, 3-15 mm door seam
Cut-out requirements - two 45 mm holes, 8-12 mm glass, inward opening only.
FORGE Logo

PDF Files - FORGE H1 Frameless Glass Door Handle Smart Lock

FORGE H1 Frameless Glass Door Handle Smart Lock - User Leaflet (PDF)
Two-page leaflet for the H1 glass lock - specifications, the panel layout and dimensions, the door-hole chart, latch adjustment with the stop piece, installation and the keypad menus.
Tuya Smart App Pairing Guide (Wi-Fi locks) (PDF)
A generic two-page pairing sheet for Tuya Wi-Fi locks - pairing mode, 2.4 GHz Wi-Fi, remote unlock on a bell press and 7-digit temporary passwords. Its screens show the Tuya Smart app; this lock's app is Forge Smart (Tuya).
FORGE Logo

FORGE H1 Frameless Glass Door Handle Smart Lock - Product Gallery

The H1 glass door handle lock fitted to a frameless glass door with the fixed blade and key
The H1 on a frameless glass door, with the key in the lock.
Automatic or manual lock mode, programmable to stay unlocked for a set period
Lock modes - automatic or manual locking, and a period to keep it unlocked.
The H1 on a pair of glass doors with the optional glass-to-glass parts, which are sold separately
A glass-to-glass setup with the optional parts on the second leaf (sold separately).
FORGE Logo

FORGE Warranty

FORGE Electrical products sold by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries are covered by FORGE's 2-year warranty against defects. All warranty claims are lodged with us, and we liaise with FORGE on your behalf.

Warranty Summary

DetailCoverage
WarrantorFORGE Electrical
Duration2 years from the date of delivery
Who is coveredThe original purchaser
What is coveredDefects in materials and workmanship under normal use and service
RemedyRepair or replacement of the product or faulty part, with new or refurbished goods, at FORGE's discretion and at no charge
Proof of purchaseRequired for all claims
Applies toFORGE-branded products only

How to Make a Claim

For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
  1. Notify us in writing within the 2-year warranty period, including your proof of purchase and a description of the fault.
  2. We will assess your claim with FORGE and advise the next steps. The product may need to be returned for assessment.
  3. Where the defect is covered, FORGE will repair or replace the product or faulty part at no charge.

Exclusions

The FORGE warranty does not cover:

  • Improper installation, maintenance or operation, including not following FORGE's product specifications or instructions
  • Normal wear and tear
  • Misuse, abuse, negligence or accident
  • Modification by anyone other than FORGE Electrical
  • External causes such as natural disasters
  • Damage from excessive rain, water ingress, flooding or other liquid exposure beyond the product's rated IP protection level
  • Cosmetic ageing of outdoor finishes - light colour fading, surface dulling or minor oxidation from UV exposure, humidity and temperature changes
IP Ratings Are Not a Guarantee Against Extreme Weather
IP ratings on FORGE outdoor locks are intended for general outdoor conditions - rain, sun and dust. They do not guarantee performance under extreme exposure such as driving rain, hailstorms, constant salt spray, flooding or immersion.

Important Notes

Outdoor Installations
In unusually harsh or exposed locations, FORGE strongly recommends fitting a rain cover or protective hood over the lock to shield it from direct weather and driving rain. If your product has been exposed to water, contact us for support.
Your Rights Under the Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The FORGE warranty is in addition to these rights.
Ask our expert locksmith - 30 years experience

Confused? Overwhelmed? We get it.

Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.

Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.

Get Your Free Recommendation →

How it works - three easy steps:

1. Upload photos

A few clear shots of your door, lock and frame - inside and out.

2. We assess

Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.

3. You get a recommendation

A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.

Also useful while you are deciding: