Lockwood DX Digital Accessory Packet for 3570 - Zinc Clear Cr3+ Chromate - SP10000-519ZP
The Lockwood SP10000-519ZP DX Digital Accessory Packet is a service and installation component set designed for use with compatible Lockwood 3570 series digital lock systems.
This accessory packet is supplied in Zinc Clear Cr3+ Chromate and is typically used during installation, upgrades, or maintenance of DX digital locking systems where specific mounting or internal components are required.
Typically ships in 10 Days
Non-Returnable Item: This product is a special order and is not returnable.
Key Features
- Accessory packet for Lockwood DX digital locking systems
- Designed for use with Lockwood 3570 series locks
- Supports installation and servicing requirements
- Zinc Clear Cr3+ Chromate finish
- Used as part of a complete digital lock assembly
Suitable Uses
- Lockwood 3570 series digital locks
- DX digital lock installations and upgrades
- Replacement of internal or mounting components
- Commercial and institutional access control systems
What's In the Box
- DX digital accessory components (exact contents not specified by manufacturer)
Full Specifications
Frequently Asked Questions
Is this suitable for fire doors?
No fire rating is specified for this accessory packet. Fire compliance depends on the complete door and lock assembly.
Does this include a full digital lock?
No. This is an accessory packet only and does not include the lock body or electronic components.
What is a common installation mistake to avoid?
Using accessory packets without confirming compatibility with the correct lock series can result in incorrect fitment.
Additional Information
- This is a specialised accessory pack intended for servicing digital lock installations.
- Commonly used during upgrades or replacement of internal mounting hardware.
- Correct identification of the Lockwood 3570 system is essential before ordering.
- Typically specified in Australian commercial and institutional access control environments.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
Official Warranty Document
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
