Lockwood DX Spindle SP10000 - Zinc Clear Cr3+ Chromate - SP10000-127ZP (Box of 5)
The Lockwood SP10000-127ZP DX Spindle is a replacement spindle component supplied in a box of 5 for compatible Lockwood DX digital lock systems.
This model is supplied in Zinc Clear Cr3+ Chromate and is commonly used for servicing, repair, or installation work where multiple spindle components are required.
Typically ships in 1 Days
Non-Returnable Item: This product is a special order and is not returnable.
Key Features
- Replacement DX spindle for compatible Lockwood digital locks
- Supplied in a box of 5 spindles
- Zinc Clear Cr3+ Chromate finish
- Suitable for service, repair, and installation work
- Used where multiple replacement spindle components are required
Suitable Uses
- Compatible Lockwood DX digital lock systems
- Replacement of worn or damaged spindle components
- Commercial and institutional access hardware servicing
- Maintenance where a pack quantity is preferred
What's In the Box
- 5 x Lockwood DX spindle components
Full Specifications
Item Code Family
Frequently Asked Questions
Is this suitable for fire doors?
No standalone fire rating is specified for this spindle. Fire compliance depends on the complete tested door and lock assembly.
Does this include the full digital lock?
No. This product includes spindle components only and does not include the lock body, keypad, latch, or other digital lock hardware.
What is a common installation mistake to avoid?
Do not assume all DX spindle parts are interchangeable. Confirm the lock model and required spindle type before fitting.
Additional Information
- This product is a service component used when maintaining compatible Lockwood DX digital lock systems.
- The box of 5 format is useful for installers and technicians handling multiple repairs or service calls.
- Correct spindle selection is important because incorrect spindle fitment can affect lock operation.
- Commonly used in Australian commercial and institutional access hardware maintenance.
Lockwood branded products purchased new in Australia from authorised resellers are covered against defects in materials and workmanship for:
- Mechanical components: 25 years
- Electrical and electronic components: 2 years (excluding batteries)
Lockwood Keyless Entry Catalogue
Lockwood Keyless Entry Catalogue
Lockwood Warranty Overview
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary depending on product type, mechanical components, electrical elements, and finish category.
This overview summarises the structure of Lockwood warranty coverage. Full terms, exclusions and claim procedures are set out in the official Lockwood Warranty document.
Warranty Periods Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- Decorative finishes including Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants: typically up to 2 years against corrosion.
- Unlacquered brass finishes will naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where cleaning and maintenance have not been followed.
What the Warranty Covers
- Defects in material and workmanship during the applicable warranty period.
- Assessment by ASSA ABLOY to determine repair, replacement with the same or closest equivalent product, or refund of purchase price.
Common Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
Warranty Claim Process
- Retain proof of original purchase.
- Return the product through the original place of purchase where applicable.
- If claiming directly, obtain a case number before returning goods.
- Products must be securely packed and clearly identified.
- Warranty assessment determines repair, replacement or refund.
Australian Consumer Law
Lockwood warranties operate in addition to rights available under the Australian Consumer Law. Goods come with guarantees that cannot be excluded. Customers may be entitled to a replacement or refund for a major failure and compensation for reasonably foreseeable loss or damage.
Where a product fails to meet acceptable quality standards and the failure does not amount to a major failure, the customer is entitled to repair or replacement.
Official Warranty Document
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
