Lockwood Induro 2-Point Hinged Door Mortice Lock - 30mm Backset (LW7130L)
The Lockwood Induro 2-Point Hinged Door Mortice Lock (LW7130L) is a Euro profile mortice lock for hinged residential aluminium and timber doors, with a 30mm backset. It locks at two points - the latch and a deadbolt - and the bolt throw is set on the lock itself: 24mm long throw or 13mm short throw.
It replaces the Lockwood Optimum mortice lock on the same installation footprint, so it suits new doors and existing Optimum doors alike. Measure your backset before you order - the Induro 2-Point also comes in 40mm and 50mm backsets.
This listing is the lock body. The strike plate, the Euro cylinder and the lever furniture are ordered separately.
Usually ships in 3 business days.
No strike plate, Euro cylinder or lever furniture is in the pack. Choose a strike to suit your frame from Accessories and Spares below, add a 5 or 6 pin fixed cam Euro profile cylinder, and fit lever-on-long-plate furniture such as Palladium. Not sure what your door needs? Contact us with photos of the door and frame.
Key Features
- Two points of locking - the latch and the deadbolt
- Bolt throw set on the lock: long throw 24mm as supplied, or short throw 13mm, switched with a simple selector - choosing your bolt throw
- Replaces the Lockwood Optimum mortice lock on the same installation footprint, fitted the same way
- Reversible latch bolt, so handing is set on site
- Stainless steel faceplate over a durable mechanism
- Takes a 7.6mm or 8mm spindle
- Latch can be deadlocked by key
- Passage, Safety and Secure modes - see Lock Status below
- Tested to AS 4145.2-2008: Security Level S7 and Durability Level D7
- Suits doors 32mm to 45mm thick
- Browse more mortice locks
What's in the Box
- 1 x Induro 2-Point mortice lock body with brushed stainless steel faceplate, 30mm backset, supplied set to long throw (24mm)
Not in the pack: strike plate, Euro cylinder and lever furniture.
Suitable Uses
- Hinged residential aluminium and timber doors
- Doors with a 30mm backset - see standard backset sizes
- Doors 32mm to 45mm thick - how to measure door thickness
- Replacing a Lockwood Optimum mortice lock
- Prefer keyless? See the Lockwood Latitude Slim Smart Lock, or browse smart locks for doors with a narrow frame
Available Finish Options
Brushed Stainless Steel
(This Product)
LW7130L
The finish is the faceplate on the door edge. Finish selection does not affect functionality, compliance, or performance.
Item Code Family - Lockwood Induro Hinged Door Mortice Locks
Eight Induro listings, split by locking points, backset, bolt throw and whether the rods kit is in the pack.
The 2-Point Lockwood Latitude Slim Smart Lock is made to replace an Induro 2-Point or Optimum lock without routing the door. It arrives with its own mortice, so this lock comes out rather than being reused, and the strike plate is changed because the smart lock uses a lift bolt where this lock has a projection bolt. Match the backset when you order: for 30mm that is LWL/LSSL/0230B (short throw) or LWL/LSSL/0231B (long throw) - see the Latitude Slim configurations.
Accessories & Spares
Strike plates are not in the lock pack, so every installation needs one of the strikes below. These parts are sold on our Gold Coast Hardware website: each link opens there in a new tab, and they are ordered there in a separate cart. Contact us to confirm the right strike for your frame.
The lock also needs a 5 or 6 pin fixed cam Euro profile cylinder and lever-on-long-plate furniture, including Palladium and Palladium Xtra Snib. Contact us and we will match both to the lock.
Full Specifications
Lock Status and Operation
With the right furniture the lock has three status modes:
- Passage mode - free access from inside and outside, no key needed.
- Safety mode - switched on and off with the snib lever from inside; a key is needed to unlock from outside. This mode needs Palladium Xtra Snib furniture.
- Secure mode - the handles are locked from both sides, and a key is needed from either side.
Dimensions
Frequently Asked Questions
This listing is the lock body. You also need a strike plate, a Euro cylinder and lever furniture. The strikes are listed under Accessories and Spares above; contact us and we will match a cylinder and furniture to the lock.
Yes. The Induro 2-Point replaces the Optimum on the same installation footprint and is fitted the same way. Check the backset of the lock on your door first - this one is 30mm.
You do not have to choose when you order. The lock arrives set to long throw (24mm) and a selector on the lock switches it to short throw (13mm). Here is how to choose your bolt throw.
Measure from the door edge to the centre of the spindle - how to measure your backset. This lock is 30mm; the Induro 2-Point also comes in 40mm and 50mm.
Yes. The 2-Point Lockwood Latitude Slim Smart Lock replaces an Induro 2-Point without routing the door. It comes with its own mortice and needs its own strike.
Additional Information
Warranty
Lockwood products bought new in Australia through authorised channels are covered against defects in materials and workmanship: 25 years on mechanical components, 3 years on electrical and electronic parts (PADDE and electric mortice locks 5 years; batteries excluded), 12 months on keys, and finish cover that varies by finish type (up to 25 years on Everbrass). Proof of purchase required for all claims.
Download PDF Resources
The 24-page catalogue. The Induro 2-Point is on pages 3 and 4, with the strikes and strike kits on pages 13 and 14.
Warranty terms and conditions for Lockwood products, including the 25-year cover on mechanical components.
Lockwood Induro 2-Point LW7130L - FAQ and Fitting Guide
Sizing, operation and fitting questions for the Lockwood Induro 2-Point Hinged Door Mortice Lock (item code LW7130L). For smart lock questions see Chapter 13 - Smart Lock FAQ, and for the full range read the Ultimate Smart Lock Buyer's Guide.
Fit and Sizing
Measure from the door edge to the centre of the spindle hole - step by step here. This lock is 30mm. Getting it wrong means the handle and cylinder holes will not line up: what happens with the wrong backset.
Doors 32mm to 45mm thick. Here is how to measure door thickness.
No. The latch is reversible, so handing is set on site. The strike and strike box kits are handed, so check which hand your door is before ordering one.
Yes - it keeps the Optimum installation footprint and fitting method. If you are not sure what is on the door, identify your existing hardware first.
Locking and Operation
A selector on the lock switches the deadbolt between long throw (24mm, as supplied) and short throw (13mm). Set it before the lock goes into the door. More on deadbolt projection.
Two - the latch and the deadbolt. The latch can also be deadlocked by key.
Passage gives free access from both sides. Safety is switched with the snib lever inside and needs a key from outside. Secure locks the handles from both sides and needs a key from either side. Safety mode needs Palladium Xtra Snib furniture.
What Else You Need
No. Choose from the Induro 12mm strike, the Optimum 12mm, 43mm and 60mm strikes, or a handed strike and strike box kit for a timber door, a rebated timber door or an aluminium French door. They are shown on page 13 of the catalogue.
A 5 pin or 6 pin fixed cam Euro profile cylinder, ordered separately. Contact us and we will match one to the lock.
Lever-on-long-plate furniture, including Palladium and Palladium Xtra Snib. The lock takes a 7.6mm or 8mm spindle.
Going Keyless
Yes. The 2-Point Lockwood Latitude Slim Smart Lock is made to replace an Induro 2-Point or Optimum lock with no door routing. It is supplied with its own mortice and strike - the strike has to change because the smart lock uses a lift bolt where this lock has a projection bolt. For a 30mm backset order LWL/LSSL/0230B (short throw) or LWL/LSSL/0231B (long throw).
Browse our smart locks for doors with a narrow frame.
Standards and Warranty
AS 4145.2-2008, Security Level S7 and Durability Level D7. Read what AS 4145.2 covers.
25 years on mechanical components under the Lockwood warranty, with the terms in the Lockwood 25 Year Mechanical Warranty (PDF).
No. Corrosion from coastal or corrosive environments is excluded, so keep the faceplate clean if you live near salt water.
Related Products, Guides and Buyer's Guide Chapters
Induro mortice locks: 2-Point LW7140L | 2-Point LW7150L | 4-Point LW7230S | 4-Point LW7230L | 4-Point LW7240S | 4-Point LW7230S/A10 | 4-Point LW7240S/A10.
Keyless on the same system: Lockwood Latitude Slim Smart Lock | Latitude Slim item codes | mortice locks for smart locks.
Strikes and rods: Lockwood Induro Double Sided Strike - 12mm | Lockwood Optimum Double Sided Strikes | Lockwood Timber Door Strike Kit | Lockwood Timber Door Rebate Strike Kit | Lockwood Aluminium French Door Strike Kit.
Guides: standard backset sizes | choosing bolt throw | door handing | Chapter 02 - door prep | Chapter 01 - the mechanical layer | Lockwood brand profile.
Lockwood Induro 2-Point Mortice Lock - Dimensions
Lockwood Induro 2-Point Mortice Lock - Catalogue Pages
PDF Files - Lockwood Induro LW7130L
The 24-page catalogue. The Induro 2-Point is on pages 3 and 4, with the strikes and strike kits on pages 13 and 14.
Warranty terms and conditions for Lockwood products, including the 25-year cover on mechanical components.
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
