Lockwood Induro 4-Point Hinged Door Mortice Lock - 40mm Backset, Short Throw (LW7240S)
The Lockwood Induro 4-Point Hinged Door Mortice Lock (LW7240S) is a lift-to-lock multipoint mortice lock for hinged residential aluminium and large panel doors, with a 40mm backset and a 13mm short throw deadbolt. Lifting the handle throws a lift-bolt that pulls the door against its seal, and with shoot bolt rods fitted it also throws bolts into the head and sill for four points of locking.
This is the lock body on its own - the shoot bolt rods kit is not included. Order the rods-kit version if you want the rods in the same pack.
The strike plate, Euro cylinder and lever furniture are ordered separately. It is a retrofit replacement for Optimum, LCL and Millton locks on the same door-side installation, although the strike and jamb cut-outs may differ because of the lift-bolt.
Usually ships in 3 business days.
No strike plate, Euro cylinder, lever furniture or shoot bolt rods are in the pack. Choose a strike to suit your frame from Accessories and Spares below, add the rods kit for four-point locking, a 5 or 6 pin fixed cam Euro profile cylinder, and lever-on-long-plate furniture such as Palladium. Not sure what your door needs? Contact us with photos of the door and frame.
Key Features
- Four points of locking with shoot bolts fitted: latch, lift-bolt, and top and bottom shoot bolts - rods kit sold separately
- Lift the handle to lock; handle down retracts every locking point in one movement
- The lift-bolt compresses the door against its seal - with the correct strike that means better water and air sealing, especially on large panel doors
- Locking points can be thrown in any order, with or without the shoot bolts
- Works as a single-point latch for everyday coming and going
- 13mm short throw deadbolt projection - why bolt throw matters
- Reversible latch, so handing is set on site
- Stainless steel faceplate over a durable mechanism; takes a 7.6mm or 8mm spindle
- Latch can be deadlocked by key
- Retrofit replacement for Optimum, LCL and Millton locks on the same door-side installation
- Tested to AS 4145.2-2008
- Suits doors 32mm to 45mm thick
- Browse more mortice locks
What's in the Box
- 1 x Induro 4-Point mortice lock body with brushed stainless steel faceplate, 40mm backset, 13mm short throw
Not in the pack: strike plate, Euro cylinder, shoot bolt rods and lever furniture.
Suitable Uses
- Hinged residential aluminium doors and large panel doors
- Doors where a tight water and air seal matters - the lift-bolt pulls the door against the seal
- Doors with a 40mm backset - see standard backset sizes
- Doors 32mm to 45mm thick - how to measure door thickness
- Replacing Optimum, LCL and Millton locks
- Prefer keyless? See the Lockwood Latitude Slim Smart Lock, or browse smart locks for doors with a narrow frame
Available Finish Options
Brushed Stainless Steel
(This Product)
LW7240S
The finish is the faceplate on the door edge. Finish selection does not affect functionality, compliance, or performance.
Item Code Family - Lockwood Induro Hinged Door Mortice Locks
Eight Induro listings, split by locking points, backset, bolt throw and whether the rods kit is in the pack.
The Lockwood Latitude Slim Smart Lock is built on the same Induro 4-Point lift-to-lock system, but it is supplied with its own mortice - an Induro body adapted for the keyless escutcheon. This keyed lock is not a replacement mortice for a Latitude Slim. If you need one, contact us with the item code from your lock. Choosing between keyed and keyless? The matching Latitude Slim for a 40mm backset and short throw is LWL/LSSL/0440B - see the Latitude Slim configurations.
Accessories & Spares
Strike plates are not in the lock pack, so every installation needs one of the strikes below. These parts are sold on our Gold Coast Hardware website: each link opens there in a new tab, and they are ordered there in a separate cart. Contact us to confirm the right strike for your frame.
The lock also needs a 5 or 6 pin fixed cam Euro profile cylinder and lever-on-long-plate furniture, including Palladium and Palladium Xtra Snib. Contact us and we will match both to the lock.
Full Specifications
Lock Status and Operation
- Single point - latch. Works like an ordinary passage door: handle down retracts the latch, and the door latches itself as it closes.
- Four point - lift to lock. Lift the handle to throw the lift-bolt and the shoot bolts. Push the handle down and every locking point retracts together. Turn the key to deadlock.
With the right furniture the lock has three status modes:
- Passage mode - free access from inside and outside, no key needed.
- Safety mode - switched on and off with the snib lever from inside; a key is needed to unlock from outside. This mode needs Palladium Xtra Snib furniture.
- Secure mode - the handles are locked from both sides, and a key is needed from either side.
Dimensions
Frequently Asked Questions
This listing is the lock body. You also need a strike plate, a Euro cylinder and lever furniture, plus the shoot bolt rods kit for four-point locking. The strikes and rods are listed under Accessories and Spares above; contact us and we will match a cylinder and furniture to the lock.
Yes. The locking points can be thrown in any order, so the lock works with or without shoot bolts thrown, and in everyday use it behaves as a single-point latch. Shoot bolts need the rods kit - sold separately as P33096, or order the rods-kit version of this lock.
Yes, on the same door-side installation. Allow for the frame side: because this lock uses a lift-bolt, the strike and the jamb cut-outs may differ from the lock it replaces.
This is the 13mm short throw model. The 30mm backset comes in short throw (13mm) and long throw (23mm); the 40mm backset is short throw only. Read why bolt throw matters.
Measure from the door edge to the centre of the spindle - how to measure your backset. This lock is 40mm; the Induro 4-Point also comes in 30mm.
Additional Information
Warranty
Lockwood products bought new in Australia through authorised channels are covered against defects in materials and workmanship: 25 years on mechanical components, 3 years on electrical and electronic parts (PADDE and electric mortice locks 5 years; batteries excluded), 12 months on keys, and finish cover that varies by finish type (up to 25 years on Everbrass). Proof of purchase required for all claims.
Download PDF Resources
The 24-page catalogue. The Induro 4-Point is on pages 5 and 6, the strikes and strike kits on pages 13 and 14, and the shoot bolt rods on page 16.
Warranty terms and conditions for Lockwood products, including the 25-year cover on mechanical components.
Lockwood Induro 4-Point LW7240S - FAQ and Fitting Guide
Sizing, operation and fitting questions for the Lockwood Induro 4-Point Hinged Door Mortice Lock (item code LW7240S). For smart lock questions see Chapter 13 - Smart Lock FAQ, and for the full range read the Ultimate Smart Lock Buyer's Guide.
Fit and Sizing
Measure from the door edge to the centre of the spindle hole - step by step here. This lock is 40mm. Getting it wrong means the handle and cylinder holes will not line up: what happens with the wrong backset.
Doors 32mm to 45mm thick. Here is how to measure door thickness.
No. The latch is reversible, so handing is set on site. The strike and strike box kits are handed, so check which hand your door is before ordering one.
On the door side, yes - the installation is the same. On the frame side the strike and jamb cut-outs may differ, because this lock uses a lift-bolt where the older locks used a projection bolt. If you are not sure what is on the door, identify your existing hardware first.
Locking and Operation
Lift the handle and the lift-bolt throws into the strike, pulling the door against its seal; with rods fitted the top and bottom shoot bolts throw at the same time. Push the handle down and every locking point retracts together. Turn the key to deadlock.
Like an ordinary passage door. Handle down retracts the latch, and the door latches itself when it closes. You only lift the handle when you want the extra locking points.
13mm on this model. Across the range, short throw is 13mm (30mm and 40mm backsets) and long throw is 23mm (30mm backset only). More on deadbolt projection.
Passage gives free access from both sides. Safety is switched with the snib lever inside and needs a key from outside. Secure locks the handles from both sides and needs a key from either side. Safety mode needs Palladium Xtra Snib furniture.
What Else You Need
No. Choose from the Induro 12mm strike, the Optimum 12mm, 43mm and 60mm strikes, or a handed strike and strike box kit for a timber door, a rebated timber door or an aluminium French door. They are shown on page 13 of the catalogue.
A 5 pin or 6 pin fixed cam Euro profile cylinder, ordered separately. Contact us and we will match one to the lock.
Lever-on-long-plate furniture, including Palladium and Palladium Xtra Snib. The lock takes a 7.6mm or 8mm spindle.
Only for four-point locking. This listing is the lock body, so add the kit or order the rods-kit version. The shoot bolt rods kit P33096 holds 1m and 1.3m rods, rod ends and tips, and the extension kit P84017 covers doors over 2.4m - see page 16 of the catalogue.
Going Keyless
No. The Latitude Slim uses the Induro 4-Point lift-to-lock system, but its mortice is an Induro body adapted for the keyless escutcheon and comes in the carton with the lock. This keyed lock is not a spare for it. See how its multipoint locking works on that page.
Browse our smart locks for doors with a narrow frame.
Standards and Warranty
AS 4145.2-2008. Read what AS 4145.2 covers.
25 years on mechanical components under the Lockwood warranty, with the terms in the Lockwood 25 Year Mechanical Warranty (PDF).
No. Corrosion from coastal or corrosive environments is excluded, so keep the faceplate clean if you live near salt water.
Related Products, Guides and Buyer's Guide Chapters
Induro mortice locks: 2-Point LW7130L | 2-Point LW7140L | 2-Point LW7150L | 4-Point LW7230S | 4-Point LW7230L | 4-Point LW7230S/A10 | 4-Point LW7240S/A10.
Keyless on the same system: Lockwood Latitude Slim Smart Lock | Latitude Slim item codes | mortice locks for smart locks.
Strikes and rods: Lockwood Induro Double Sided Strike - 12mm | Lockwood Optimum Double Sided Strikes | Lockwood Timber Door Strike Kit | Lockwood Timber Door Rebate Strike Kit | Lockwood Aluminium French Door Strike Kit | Lockwood Shoot Bolt Rods Kit | Lockwood Multipoint Extension Kit.
Guides: standard backset sizes | choosing bolt throw | door handing | Chapter 02 - door prep | Chapter 01 - the mechanical layer | Lockwood brand profile.
Lockwood Induro 4-Point Mortice Lock - Dimensions
Lockwood Induro 4-Point Mortice Lock - Catalogue Pages
PDF Files - Lockwood Induro LW7240S
The 24-page catalogue. The Induro 4-Point is on pages 5 and 6, the strikes and strike kits on pages 13 and 14, and the shoot bolt rods on page 16.
Warranty terms and conditions for Lockwood products, including the 25-year cover on mechanical components.
Lockwood Warranty
Lockwood branded products are covered by manufacturer warranties issued by ASSA ABLOY Australia Pty Ltd. Warranty periods vary by product type, with separate cover for mechanical components, electrical and electronic parts, keys, and finishes.
The summary below sets out the standard warranty structure. All warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries. Full terms and exclusions are set out in the official Lockwood warranty document linked at the base of this page.
Warranty Summary
Finish Coverage Guide
- Everbrass finishes: up to 25 years against corrosion, tarnishing and discolouration.
- Stainless steel, polished stainless steel, chrome plating and anodised finishes: typically up to 10 years.
- PVD and VIVID finishes: typically up to 10 years.
- Symmetry range finishes: typically up to 5 years.
- Decorative finishes (Antique Copper, Architectural Bronze, Oil Rubbed Bronze, Aged Brass, Polished Brass, Satin Brass and related variants): typically up to 2 years against corrosion.
- Unlacquered brass finishes naturally age and change appearance over time. This is not considered a defect.
- Tea staining of stainless steel is not covered where the required cleaning and maintenance have not been followed.
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries with your proof of original purchase.
- Keep the product securely packed and clearly identified, ready for assessment.
- Where a claim is escalated to the manufacturer, ASSA ABLOY may issue a case number before goods are returned.
- ASSA ABLOY assesses the claim and determines repair, replacement with the same or closest equivalent product, or refund of the purchase price.
Exclusions
- Normal wear and tear.
- Misuse, abuse, accidental damage or use outside published specifications.
- Improper maintenance or failure to follow care instructions.
- Unauthorised modification, repair or use of non-genuine parts.
- Exposure to corrosive environments including coastal air, salt spray, chemicals or pollution.
- Removal, refitment or associated labour charges.
- Products not originally sold in Australia through authorised channels.
These manufacturer warranties apply in addition to your rights under the Australian Consumer Law. Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure and to compensation for any other reasonably foreseeable loss or damage. Where a failure does not amount to a major failure, you are entitled to have the goods repaired or replaced.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
