McGrath Euro 85 Series Mortice Lock - 60mm Backset - 85mm Pitch, 240mm Faceplate - Suits A210, A231, A236 and NX5
The McGrath Euro 85 Series is the swing-door mortice body behind the McGrath A210, A231 and A236 slimline smart locks and the NX5. This is the 60mm backset body - the standard 60mm backset used on most Australian timber and aluminium entry doors. It is a mechanical lock body only - a latch and a deadbolt in a 1.5mm SS304 stainless steel case, driven by an 8mm square spindle and a Euro profile cylinder. There are no electronics, no batteries and no app in this listing; the smart lock furniture sits over it and does the thinking.
Every body in the Euro 85 Series shares the same 85mm pitch (the spindle-to-cylinder centre distance), the same 8mm spindle hub and the same 240 x 22mm faceplate. Only the backset - and therefore the case depth - changes. The 60mm body has a case depth of 76.5mm. The other backsets are on their own listings: the 28 to 50mm multi-backset listing and the 70mm body (MLEM7085SS).
Backset is the one measurement you must get right before you order. If you are replacing an existing body, measure it before you buy - our guide shows how to measure your lock backset and what happens if you pick the wrong one. If you are replacing a body you cannot identify, start with the body identification steps in our McGrath mortice guide.
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Compatible McGrath Smart Locks
The Euro 85 swing body is the mortice McGrath specifies for its 85mm-pitch smart locks. It fits these four models - each link opens the host lock's own page, and the accessories sections on those pages come straight back here.
Not for the NX1, Albion, NX6 or NX6W - those locks take the 60/50 spindle mortice (NX1, Albion) or the Euro 60/68 three-point body (NX6, NX6W). The five McGrath mortice families are compared in our range guide.
Key Features
- 60mm backset - the spindle and cylinder sit 60mm back from the door edge, giving a case depth of 76.5mm (dimension A on the drawing below). Check yours against the standard Australian backset sizes.
- 85mm pitch (lock centres) - the one constant across all seven Euro 85 backsets, so the smart lock furniture lines up on any of them.
- 8mm square spindle hub driving a reversible latch - one body suits left- and right-hand opening doors.
- Latch plus deadbolt in one case: lift the lever to throw the deadbolt, so the door is deadlocked without a separate key turn. What a deadbolt adds over a latch is explained in Chapter 01 - the mechanical layer and our note on deadbolt projection.
- Takes a standard Euro profile fixed-cam cylinder (sold separately), which is where the mechanical key override for the host smart lock lives.
- 1.5mm SS304 stainless steel case with an SS304 latch and deadbolt, finished in satin stainless steel.
- Cycle tested beyond 500,000 operations and passed BHMA Level 2 and Level 3 - see Chapter 11 for how Australian and international lock standards relate.
- 240 x 22 x 3mm faceplate - the same footprint on every Euro 85 body, which is what makes a backset swap a straight replacement in the existing mortice slot.
What's in the Box
- 1 x McGrath Euro 85 swing mortice lock body (60mm backset), 240mm stainless steel faceplate fitted
- Fixing screws
Note: the Euro profile cylinder and the smart lock furniture are not included. McGrath lists a strike plate and strike plate pocket as the accessory set for this body - see Accessories and Spares.
Suitable Uses
- Timber and aluminium hinged (swing) doors fitted with a McGrath A210, A231, A236 or NX5 - the door type compatibility matrix in Chapter 04 shows where each lock belongs.
- Doors already prepared for a 60mm backset Euro mortice - typically timber entry doors and wider aluminium stiles. Chapter 02 covers backset and stile width measuring.
- Regular front doors and internal doors where the smart lock furniture needs a genuine deadbolt behind it, not just a spring latch.
- Replacing a worn or damaged Euro 85 body under an existing McGrath lock without disturbing the furniture - measure the backset and faceplate first.
- Re-preparing a door where the original body had a different backset - all seven Euro 85 backsets share the same faceplate footprint, so only the case pocket depth changes.
- Domestic and light-commercial doors where a keyed Euro cylinder is wanted as the mechanical backup to a smart lock with a backup key. Browse the full mortice locks for smart locks category for the rest of the range.
Sliding or bifold doors - a straight deadbolt cannot hold a sliding panel. Use the 28mm or 35mm Euro 85 hook body with the A231 sliding-door lock, or browse sliding-door smart locks. Fire doors - no fire rating is published for any Euro 85 body, and none of the four host locks is fire assessed on it. Chapter 05 explains what a fire-door core needs; the McGrath fire assessments name the F05 / F54 ANSI bodies and the dormakaba MS2602 instead - see fire-door smart locks. NX1, Albion, NX6 and NX6W - different families; see the compatibility table above.
Available Finish Options
Satin Stainless Steel
(This Product)
STK MLEM6085SS
Finish selection does not affect functionality, compliance, or performance. Only the 22mm faceplate edge is visible once the body is fitted.
Available Backset Variants - Euro 85 Series
Seven backsets, one pitch. This product is the 60mm body; the others are on their own listings. Case depth (dimension A) grows with the backset - the per-backset table in our mortice guide shows the same figures against the drawing.
McGrath Mortice Lock Family
McGrath makes five mortice families, and they are not interchangeable - the five-family comparison in our range guide is the quickest way to see which one your lock needs, and the photographic range gallery helps if you are matching an existing body by eye. Every body is linked below, or browse the whole mortice locks for smart locks category.
Accessories and Spares
The Euro cylinder is what puts a keyhole in this mortice, and it is keyed to the host lock's profile - so order the cylinder and key blank that match the smart lock on the door, not the mortice. All of them sit in our cylinders and barrels and keys and key blanks categories. The cylinder note in our ANSI blog explains why a Euro cylinder will not fit an ANSI body, and vice versa.
Full Specifications
Dimensions
Frequently Asked Questions
Measure from the door edge to the centre of the existing spindle or cylinder hole - our backset guide shows exactly where to put the tape. If it reads 60mm, this is the body. If it reads 28 to 50mm you want the 28 to 50mm multi-backset listing, and 70mm is the 70mm body (MLEM7085SS). A body with the wrong backset will not line the spindle up with the smart lock furniture.
No. The body has the Euro profile aperture but ships without a cylinder. Order the McGrath cylinder that matches your lock - listed in Accessories and Spares - or reuse the cylinder already in your existing body. The cylinder is the mechanical key override for the smart lock, which is why it is keyed to the lock model rather than to the mortice.
It suits the A210, the hinged-door A231, the A236 and the NX5 - all 85mm-pitch locks. It does not suit the NX1 or Albion (they use the 60/50 spindle mortice), the NX6 or NX6W (they use the Euro 60/68 three-point body) or any sliding door (use the hook body). The five-family table in our guide lays this out in one place.
Close the door and lift the lever - the deadbolt throws and the door is deadlocked. To come back in, unlock the smart lock with your PIN, fingerprint, card or app and press the lever down; the lever retracts the latch and the deadbolt together. You do not need to turn a key to deadlock or to unlock. Our guide has a short explainer on lifting the lever to throw the deadbolt, and this note on deadbolt projection covers why the bolt travel matters.
No - the latch is reversible, so one body suits either hand. Reverse the latch before you fit the body so the bevel faces the strike. If you are not sure which way your door swings, this is how to determine door handing.
Additional Information
- Pitch is fixed, backset is not. Every Euro 85 body has 85mm between the spindle and cylinder centres because the McGrath furniture is drilled for 85mm. Choosing a body by pitch alone is the classic mistake - a Euro body from another brand at 85mm pitch may still have a different faceplate or backset. Chapter 02 covers the whole mortice lever and long-plate mortice measuring routine, and why backset is less forgiving on a smart lock.
- Lockton equivalent. The Lockton E-Series Euro smart mortice bodies share the 85mm pitch and 240 x 22mm faceplate and are catalogued as interchangeable with the McGrath Euro 85 swing bodies - the matching listing is the Lockton SML-H60, with an SML-H65 filling the gap between 60 and 70mm that McGrath does not offer. Our guide sets out the Lockton equivalents and the wider cross-brand picture.
- Not fire rated, and not a substitute for an approved fire configuration. Where a McGrath lock is used on a fire door, the assessments name the ANSI F05 / F54 bodies and the dormakaba MS2602 - a mortice that merely shares a 60mm backset is not an approved combination. Read fire-door compliance in the F05 vs F54 blog and Chapter 05 before specifying.
- Strike alignment decides how well the deadbolt throws. A strike plate a couple of millimetres off will bind the deadbolt on a lever-lift body - it is the first of the three common installation mistakes we see. Terry's offers advice and installation across the Gold Coast if you would rather not fit it yourself.
- Where McGrath sits. McGrath Locks is an Australian-managed brand distributed by LSC, and the Euro 85 body is the mortice behind its slimline range - see the McGrath brand profile in Chapter 10.
Warranty
12-month warranty against defects in materials and workmanship (24-month on ALBION, ASCOT, ASHGROVE, BARDON, GRANGE, HAMILTON, KEDRON, MANLY, SANDGATE, STAFFORD, ULTRA SECUA and WINDSOR models). McGrath Locks will repair, replace, or refund at their discretion. Proof of purchase required for all claims. Returns & Warranty | McGrath Locks Warranty
This mortice body carries the standard 12-month term. The 24-month extended term applies to the named smart locks only, not to any mortice body.
Download PDF Resources
Two-page McGrath spec sheet for the Euro 85 swing series, including the 60mm backset - construction, cycle rating, BHMA levels, the 240 x 22 x 3mm faceplate and 175 x 18mm case, and the drawings with all seven backset case depths (28, 30, 35, 45, 50, 60 and 70mm). Note the sheet's section banners say "hook" in places; the document describes the swing body.
McGrath Euro 85 Series Mortice Lock - 60mm Backset - FAQ, Fitting and Owner's Guide
Everything below is here to help you choose, fit and live with the McGrath Euro 85 swing mortice body. For the whole McGrath mortice range in one place read the McGrath Mortice Locks Guide; for measuring your door use the Buyer's Guide, starting at Chapter 02 - backset.
Choosing the Right Body
Backset is the distance from the door edge to the centre of the spindle - dimension B on our drawing, and explained from scratch here. Aluminium stiles are narrow, so the A210, A231 and A236 need bodies as short as 28mm; timber doors are commonly prepared at 45, 50, 60 or 70mm. McGrath makes the same body at all seven so the furniture never changes - only the case depth does (seven backsets, one pitch). Australian standard backset sizes are covered in the backset blog.
Four steps: count the bolts (a latch plus a single straight deadbolt is the Euro 85 swing pattern), check for a keyhole (a Euro 85 has a cylinder aperture; the 60/50 does not), measure the backset and measure the faceplate - 240 x 22mm on every Euro 85 swing body, 270mm on the hook bodies, 255 x 24mm on the 60/68. The whole routine is in how to identify the body you already have, and the range gallery shows all sixteen McGrath bodies side by side.
No. The 60/50 spindle mortice is a keyless body with a 147mm or 180mm faceplate and no cylinder aperture; the NX5's key override is in its own escutcheon. The Euro 85 body is a 240mm-faceplate Euro profile body that takes a cylinder in the mortice. Both suit the NX5, but they are prepared differently and are not interchangeable in the door - why there is no keyhole on the 60/50 explains the difference, and the NX5 mortice options section sets out which comes in the box.
Backsets are nominal; a millimetre or two of slop in an old preparation is normal and the 22mm faceplate covers a slightly oversized mortice slot. If you are 5mm or more out, you are almost certainly looking at the next size - see the standard sizes and what a wrong backset does. The neighbouring bodies are the 28 to 50mm multi-backset listing and the 70mm body (MLEM7085SS).
Cylinders, Keys and the Mechanical Override
A Euro profile fixed-cam cylinder. McGrath keys its cylinders to the host lock, so choose by the lock on the door: A210, A210 / A236, A231 or NX5 keyed-to-differ cylinders, or the A210 / A236 and A231 keyed-alike cylinders for multi-door sites. Browse everything in cylinders and barrels for smart locks. A Kawneer-thread ANSI cylinder will not fit - that is the Kawneer cylinder catch we see on ANSI orders.
On the outside escutcheon of the smart lock, 85mm below the spindle - the cylinder sits inside this mortice and the escutcheon has a matching opening. That is the whole reason the pitch must be 85mm: it is the distance from the handle spindle to the keyhole. Our blog on mechanical key override shows where to look on each McGrath model. Locks with a backup key are gathered in the has backup key category.
Yes - McGrath key blanks are model-specific: A210, A231, A236 and NX5 blanks are in the keys and key blanks category. Keyed-alike cylinders let one key open several doors on a site.
Fitting and Operation
The latch bolt on the Euro 85 body is reversible so the bevel faces the strike on either a left- or right-hand door. Establish the handing first - this step-by-step settles it - then reverse the latch before the body goes into the door. Fitting it the wrong way round leaves the latch riding over the strike instead of into it.
It throws the deadbolt. The latch alone holds the door closed; lifting the lever after closing extends the deadbolt into the strike and deadlocks the door. Once the smart lock is unlocked, pressing the lever down retracts the latch and the deadbolt together. The mechanism and its bolt travel are described in lift the lever to throw the deadbolt and in deadbolt projection.
Set the strike so the deadbolt has clear travel - the lever-lift throw will bind or refuse to fully extend on a strike that is even slightly high. That is installation mistake number one in our troubleshooting blog. The Euro 85 sheet names a strike plate and a strike plate pocket as the accessory set; for rebated double doors check the rebate kits and strikes category. If the door prep is unfamiliar, Terry's advice and installation service covers the Gold Coast.
Suitability and Limitations
No. A straight deadbolt has nothing to hook onto on a sliding panel. Use the 28mm or 35mm Euro 85 hook body - same pitch, same furniture, 270mm faceplate - with the A231 sliding-door lock. The hook-versus-bolt section of our guide explains why. Sliding-door options are gathered under glass sliding door smart locks.
No. No fire rating is published for any Euro 85 body, and the four host locks are not fire assessed on it. McGrath's fire assessments (Jensen Hughes, for the Bardon, Windsor, Hamilton and Stafford) name the F05 / F54 ANSI bodies and the dormakaba MS2602 - and on the F54 the deadbolt must be made inoperable. A body that happens to share a backset is not an approved combination. See Chapter 05, fire-door compliance and the fire door category.
It is cycle tested beyond 500,000 operations and passed BHMA Level 2 and Level 3, which is comfortably above domestic duty, and McGrath positions it for domestic and light-commercial doors. For a high-traffic commercial entrance McGrath's own answer is the ANSI pair - which of the F05 and F54 to choose is in our blog and Chapter 11 covers grading. Where the hosts are the slimline A210 / A231 / A236, the door itself is usually the limit before the mortice is.
Yes - the Lockton E-Series Euro smart mortice bodies share the 85mm pitch and 240 x 22mm faceplate and are catalogued as interchangeable with the McGrath swing bodies: the matching listing is the Lockton SML-H60, with an SML-H65 filling the gap between 60 and 70mm that McGrath does not offer. The dormakaba MS2602 is a different animal - a commercial primary mortice at 60mm backset, named in the McGrath fire assessments, but matching dimensions is not the same as approved compatibility. Our guide's cross-brand equivalents section keeps the two apart.
Related Products, Guides and Chapters
Euro 85 swing bodies: 28 / 30 / 35 / 45 / 50mm (multi-backset) · 60mm - MLEM6085SS · 70mm - MLEM7085SS
Other McGrath mortice families: Euro 85 Hook 28mm · Euro 85 Hook 35mm · 60/50 High Spindle 147mm · 60/50 High Spindle 180mm · 60/50 Low Spindle 147mm · 60/50 Low Spindle 180mm · Euro 60/68 three-point (NX6) · F05 ANSI · F54 ANSI
Host locks: A210 · A231 hinged · A231 sliding (hook bolt) · A236 · NX5
Cylinders and keys: KD cylinder A210 · KD cylinder A210 / A236 · KA cylinder A210 / A236 · KD cylinder A231 · KA cylinder A231 · KD cylinder NX5 · Key blank A210 · Key blank A231 · Key blank A236 · Key blank NX5
Cross-brand: Lockton SML-H60 · Lockton SML-H65 · dormakaba MS2602
Categories: Mortice Locks for Smart Locks · Cylinders and Barrels · Keys and Key Blanks · Rebate Kits and Strikes · Door with Narrow Frame · Has Backup Key · McGrath Locks
Buyer's Guide chapters: Ch 01 - the mechanical layer · Ch 02 - backset · Ch 02 - stile width · Ch 02 - mortice lever · Ch 04 - compatibility matrix · Ch 05 - fire door cores · Ch 10 - McGrath · Ch 11 - standards
Helpful blog reading: McGrath Mortice Locks Guide - Euro 85 swing · Identify the body you have · Measuring Your Lock Backset · Mechanical Key Override · What Is Bolt Throw · Understanding Door Handing · F05 vs F54 ANSI Mortice Locks · 3 Common DIY Installation Mistakes · Gate Post Too Narrow? · Euro 85 Series spec sheet (PDF)
What's in the Box - McGrath Euro 85 Series Mortice Lock - 60mm Backset
- 1 x McGrath Euro 85 swing mortice lock body (60mm backset), 240mm satin stainless steel faceplate fitted
- Fixing screws
McGrath Euro 85 Series Mortice Lock - 60mm Backset - Gallery
McGrath Euro 85 Series Mortice Lock - 60mm Backset - Specifications
Euro 85 Series - all seven backsets
McGrath Euro 85 Series Mortice Lock - 60mm Backset - Dimensions
McGrath Euro 85 Series Mortice Lock - 60mm Backset - Euro 85 Series Specification Sheet
PDF Files - MLEM6085SS
Two-page McGrath spec sheet for the Euro 85 swing series, including the 60mm backset - construction, cycle rating, BHMA levels, the 240 x 22 x 3mm faceplate and 175 x 18mm case, and the drawings with all seven backset case depths (28, 30, 35, 45, 50, 60 and 70mm). Note the sheet's section banners say "hook" in places; the document describes the swing body.
McGrath Locks Warranty
Warranty Summary
How to Make a Claim
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (the place of purchase) within the applicable warranty period.
- Supply your proof of original purchase - a receipt or tax invoice is required.
- Provide a clear description of the fault and your contact details.
- You may be asked to return the product for assessment before a remedy is determined.
- McGrath Locks will, at their discretion, repair the product, replace it with the same or an equivalent model, or provide a refund of the purchase price.
Exclusions
This warranty does not cover:
- Normal wear and tear
- Products that have been disassembled
- Damage caused by improper handling, incorrect installation, misuse, abuse, neglect, modification, or accident
- Installation by unlicensed persons (including non-licensed locksmiths or technicians)
- Products not used in accordance with the supplied instructions
- Cosmetic damage that does not affect functionality
- Labour or installation costs related to the removal or reinstallation of products
- Exposure to conditions outside normal environmental use
- Work completed before warranty approval
- Damage caused by battery leakage, battery failure, or force majeure
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is provided in addition to your rights and remedies under the Australian Consumer Law.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
