Borg BL50013572K Adaptor Kit - Lockwood 3572 Mortice Lock - Suits 5000 Series Keypads
The Borg BL50013572K adaptor kit converts a Lockwood 3572 mortice lock to take a Borg 5000 Series mechanical digital keypad. The Lockwood lock stays in the door and the keypad works it, so you add code entry without replacing the mortice lock. It is a single-keypad, stainless steel kit from our Scar & Adaptor Plates range.
You choose the keypad separately. Borg sells the BL5000KSC / BL5000KSS lever keypad alongside this kit, and the kit takes any of the Borg 5000 Series keypad-only units in What This Kit Converts and the Keypads It Takes - you can browse them in Keypads for Smartlocks. New to battery-free keypad locks? Start with what a mechanical digital lock is in Chapter 16 of our Buyer's Guide.
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- Converts an existing Lockwood 3572 mortice lock to Borg 5000 Series keypad entry while the lock stays in the door - the retrofit approach to adding a keypad.
- Takes a Borg 5000 Series keypad-only unit, such as the BL5000KSC / BL5000KSS lever keypad - see the full list in the compatibility table, or browse Keypads for Smartlocks.
- Single-keypad kit: for a Borg keypad on each side of the door, the back-to-back (BTB) kit is BL50013572KBTB.
- Matched to the Borg 5000 Series: the Lockwood 3572 kit for Borg 2000 and 4000 Series keypads is BL3572KIT.
- Stainless steel - one of the Borg adaptor kits and scar plates in our Scar & Adaptor Plates category.
- Spare spindles are sold separately: the standard BLMORTSPDL and the extended BLMORTSPDL120 for thicker doors.
Suitable Uses
- Doors already fitted with a Lockwood 3572 mortice lock that you want to keep - identify the lock first with existing door hardware (mortice lever and escutcheon or mortice with longplate furniture).
- Retrofit jobs that add a keypad to sound existing hardware instead of replacing the lock - see the retrofit ecosystem and our Scar & Adaptor Plates category.
- Commercial doors running a Lockwood 3572 where a battery-free code keypad is wanted - see commercial and heavy duty in Chapter 16, and the Lockwood DX mortice route if Lockwood's own keypad lock is also on the table.
- Sites that already use Borg 5000 Series locks from our Digital Mechanical Locks range, where a Lockwood 3572 door can take a keypad from the same series (Keypads for Smartlocks).
Available Finish Options
Stainless Steel
(This Product)
STK BL50013572K
Finish selection does not affect functionality, compliance, or performance.
Borg Adaptor Kits and Scar Plates - Item Code Family
This product is the bold row. Browse scar and adaptor plates in the Scar & Adaptor Plates category.
What This Kit Converts and the Keypads It Takes
This kit converts the Lockwood 3572 mortice lock to take one Borg 5000 Series keypad, chosen from the keypad-only units below; the complete Borg 5000 Series locks listed after them use the same keypad family. If you choose the Easicode Pro (ECP) keypad, ask us to confirm it with this kit before you order. If you would rather replace the lock than convert it, Lockwood's own 3572DX is the alternative.
Other ways to do the same job:
Accessories and Spares
Full Specifications
Frequently Asked Questions
A Borg 5000 Series keypad-only unit. Borg sells the BL5000KSC / BL5000KSS lever keypad alongside this kit, and the kit also takes the BL5000KMG, BL5401KSSDDA and BL5401KSSDDAECP keypads listed in What This Kit Converts and the Keypads It Takes. You can compare them in Keypads for Smartlocks. The BL5401KSSDDAECP is the Easicode Pro (ECP) keypad in that list - ECP keypads change code on the door, so ask us to confirm it with this kit before you order (Borg Easicode Pro: the on-door change).
No - match the kit to the keypad series. This kit is for Borg 5000 Series keypads; the Lockwood 3572 kit for Borg 2000 and 4000 Series keypads is BL3572KIT. You can see the keypad series for every Borg adaptor kit and scar plate in the item code family.
A Lockwood 3582 kit - this one is for the Lockwood 3572. For a Borg 5000 Series keypad on a Lockwood 3582 the kit is BL50013582K, which Borg sells for outward-opening doors only; for Borg 2000 and 4000 Series keypads it is BL3582KIT. Not sure which lock you have? Start with existing door hardware in Chapter 02, or ask us for a recommendation.
Yes, with the back-to-back (BTB) kit instead: BL50013572KBTB puts a Borg 5000 Series keypad on each side of a Lockwood 3572 door, while this kit is the single-keypad version. A keypad on the inside means a code to get out as well as in, so read what a double-sided lock is and why they are not for required exit paths before choosing it.
Thicker doors take the extended BLMORTSPDL120 spindle in place of the standard BLMORTSPDL. Measure the door as shown in door thickness (Buyer's Guide Chapter 02) and ask us to confirm the spindle before you order.
Additional Information
- A retrofit, not a replacement: Keeping a sound Lockwood 3572 and adding a Borg keypad is the kind of job described in the retrofit ecosystem, and the spare spindles for this kit are sold separately (why spare parts and support matter).
- Choose the keypad for how often codes change: The code change method belongs to the keypad, not the kit. The BL5401KSSDDAECP Easicode Pro (ECP) keypad changes code on the door (Borg ECP on-door change, what ECP means); the other 5000 Series keypads listed change code On The Bench (Borg standard chambers). If you expect to re-code even yearly, choose the ECP keypad.
- Identify and measure before ordering: Confirm the lock body is a Lockwood 3572 and measure the door thickness first (existing door hardware, door thickness). Thicker doors take the extended BLMORTSPDL120 spindle - check its special order terms first.
- Professional fitting: If you are not confident working on a mortice lock, have the conversion fitted professionally - see when DIY is appropriate and the wrong spindle position mistake, or use our advice and installation service and professional supply and installation.
- The complete-lock alternative: If the Lockwood 3572 is due for replacement anyway, Lockwood's 3572DX Digital DX keypad mortice lock does the job as one complete lock (the Lockwood DX mortice route), and you can compare the brands in Lockwood vs Borg vs Carbine.
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Borg's one-page BL5000 Series accessories sheet (LSC) - lists BL50013572K as the Lockwood 3572 mortice lock conversion, with the 3582 kit, the SPBL5001 scar plates and the BL5000KSC / BL5000KSS keypads.
The BDS security products catalogue (LSC) - page 43 covers the Borg 2000 & 5000 Series adapter plates, including BL50013572K in stainless steel with its plate dimensions. The mortice lock spindle for Borg 2000 and 5000 Series conversions is on page 45.
Borg's BL5000 Series brochure - includes dimensioned drawings of the 5000, 5400 and 5100 Series keypads.
PDF Files - BL50013572K
Borg's one-page BL5000 Series accessories sheet (LSC) - lists BL50013572K as the Lockwood 3572 mortice lock conversion, with the 3582 kit, the SPBL5001 scar plates and the BL5000KSC / BL5000KSS keypads.
The BDS security products catalogue (LSC) - page 43 covers the Borg 2000 & 5000 Series adapter plates, including BL50013572K in stainless steel with its plate dimensions. The mortice lock spindle for Borg 2000 and 5000 Series conversions is on page 45.
Borg's BL5000 Series brochure - includes dimensioned drawings of the 5000, 5400 and 5100 Series keypads.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
