Borg BL3582KOR Key Override Adaptor Plate (09351500) - Lockwood 3582 - Suits 2000 and 4000 Series
The Borg BL3582KOR adaptor plate (item code 09351500) is for a door that already has a Lockwood 3582 mortice lock and is moving to Borg keypad entry - the KOR in the code stands for key override. Borg sells it as the Lockwood 3582 conversion with key override, and it suits Borg 2000 and 4000 Series mechanical digital keypads, which need no batteries or wiring. This plate suits the aluminium-style Lockwood 3582; for the timber-style Lockwood 3572, the matching key override plate is 09351550 (BL3572KOR).
Order the keypad with the plate. The Borg 2000 and 4000 Series keypad-only units we stock are listed under What This Plate Converts and the Keypads It Takes - the Keypads for Smartlocks category also carries keypads for other locks, so check the series before you order. Borg's standard adaptor kit for the same lock is BL3582KIT, the Scar & Adaptor Plates category is the place to browse adaptor and scar plates, and Chapter 16 - Lockwood, Borg & Carbine explains how the three mechanical digital ranges differ.
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- Key override conversion for the Lockwood 3582 - one of Borg's two key override adaptor plates; the other, 09351550, is for the Lockwood 3572. Key Override Can Be Important explains where it earns its place.
- Takes Borg 2000 and 4000 Series keypads - knob and lever keypad-only units, including Easicode Pro (ECP) and Marine Grade Pro (MG Pro) versions, all listed under Compatibility.
- Keeps the Lockwood 3582 in the door - a conversion rather than a lock replacement, the approach set out in The Retrofit Ecosystem.
- Stainless steel plate - one stainless steel finish; see Available Finish Options and the plate's entry on page 43 of the BDS Security Products Catalogue 2024/2025 (PDF).
- Replacement overlay sticker available - BL2000KORSTICKER is the replacement overlay for this plate and the 3572 key override plate.
- Code changing comes with the keypad you choose - ECP keypads change the code on the door (Borg Easicode Pro); standard Borg keypads change On The Bench (Borg Standard Chambers).
- A replace-the-lock route too - a Borg lock supplied with the 28mm Ali-Latch and the BDS FPBLS27CONV face plate can take the 3582's place instead; see Compatibility.
Suitable Uses
- Doors already fitted with a Lockwood 3582 mortice lock that are moving to Borg keypad entry with key override - confirm the lock first with Chapter 02 - Existing Door Hardware.
- Aluminium doors carrying the aluminium-style 3582 - the door type compatibility matrix covers aluminium doors, and Door with Narrow Frame lists locks for slim frames if you replace the lock instead.
- Retrofits that keep the existing Lockwood 3582 rather than fitting a complete Borg lock from Digital Mechanical Locks - more conversion parts are in Scar & Adaptor Plates.
- Doors that need a key override as well as a code - Chapter 16 - Commercial & Heavy Duty covers key override alongside the other demands of busy doors.
Available Finish Options
Stainless Steel
(This Product)
STK 09351500
Finish selection does not affect functionality, compliance, or performance.
Borg Adaptor Kits and Scar Plates - Item Code Family
This product is the bold row. Browse scar and adaptor plates in the Scar & Adaptor Plates category.
What This Plate Converts and the Keypads It Takes
This plate converts the Lockwood 3582 mortice lock and takes the Borg 2000 and 4000 Series keypad-only units below - order one with the plate, and if you choose an Easicode Pro (ECP) keypad, ask us to confirm it with this plate first. For a Lockwood 3572, the key override plate is 09351550; to replace the 3582 rather than convert it, see the second table.
Other ways to do the same job:
Accessories and Spares
All three are BDS spare parts for Borg mechanical digital conversions. The extended spindle is a special order item - check door thickness before choosing between the two spindles.
Full Specifications
Frequently Asked Questions
It means the door keeps a key way in as well as the code. Borg sells 09351500 as its Lockwood 3582 conversion with key override, and it is one of Borg's two key override adaptor plates - the other, 09351550, is for the Lockwood 3572. How the key override is arranged on your door is worth confirming with our team before you order; the Heavy Duty guide's Key Override Can Be Important section explains why it can matter on a busy door.
The Lockwood 3582. For a Lockwood 3572 mortice lock, the key override plate is 09351550 (BL3572KOR). Borg's standard adaptor kits for the same two locks are BL3582KIT for the 3582 and BL3572KIT for the 3572, and the Item Code Family table compares them all.
A Borg 2000 or 4000 Series keypad-only unit from the table under What This Plate Converts and the Keypads It Takes. Choose knob or lever first - for example BL2000KSCNEW is a knob keypad and BL2301KSC a lever keypad - then the code change method and finish grade: BL4401KMGPROECP is a lever keypad with both ECP and MG Pro. Decoding Borg Names - MG Pro & ECP explains the model codes.
Keeping it is what this plate is for. The other route removes the 3582 and fits a Borg lock supplied with the 28mm Ali-Latch, with the BDS FPBLS27CONV face plate suiting the door edge cut for the 3582. If you want key override on that route, BL2702SCECP is a Borg lock with key override supplied with the 28mm latch, and BL2002SC is a standard 28mm latch lock. Measure the backset and stile width first if you are weighing up that route (backset, stile width). The right choice depends on the door and the condition of the lock, so ask us for advice if you are unsure.
Yes - BL2000KORSTICKER is the replacement overlay sticker for the Borg 2000 Series 3572 and 3582 key override plates, including this one. It is a cosmetic replacement, and the plates it suits are listed on its page.
Additional Information
- The retrofit route: a conversion keeps the Lockwood 3582 in the door and moves it to Borg keypad entry - The Retrofit Ecosystem explains why conversion parts matter, and Spare Parts and Support Matter covers keeping a Borg set-up running.
- Code changes belong to the keypad: if you expect to change the code even once a year, choose an Easicode Pro (ECP) keypad (What Does ECP Mean?, Borg Easicode Pro: The On-Door Change); standard Borg keypads change On The Bench (Borg Standard Chambers).
- Measure before you order: confirm the lock is a Lockwood 3582 with Existing Door Hardware and check door thickness - thicker doors take the extended BLMORTSPDL120 spindle rather than the standard BLMORTSPDL. Ask us if the measurements leave any doubt.
- Fitting: When DIY Is Appropriate - and When It Isn't helps you decide between fitting it yourself and calling a locksmith, and door misalignment is one of the common installation mistakes to rule out first. For help, see Advice and Installation, or book a free site survey on the Gold Coast.
- Busy doors: before converting a high-traffic or commercial door, compare the keypad options with heavier hardware in Chapter 16 - Commercial & Heavy Duty and Questions to Ask Before Choosing.
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Borg's one-page BL2000 Series accessories sheet (LSC) - lists 09351500 as the Lockwood 3582 conversion with key override, alongside the other 2000 Series adaptor kits and the BLSPLT scar plates.
The BDS security products catalogue (LSC) - page 43 covers the Borg 2000 & 5000 Series adapter plates, including 09351500 in stainless steel with its plate dimensions. The replacement KOR overlay sticker and the mortice lock spindle are on page 45.
Borg's Light Duty 2000 Series leaflet - includes a dimensioned drawing of the 2000 Series keypad.
Borg's 4400 Series brochure - includes a dimensioned drawing of the 4400 Series keypad.
PDF Files - 09351500 (BL3582KOR)
Borg's one-page BL2000 Series accessories sheet (LSC) - lists 09351500 as the Lockwood 3582 conversion with key override, alongside the other 2000 Series adaptor kits and the BLSPLT scar plates.
The BDS security products catalogue (LSC) - page 43 covers the Borg 2000 & 5000 Series adapter plates, including 09351500 in stainless steel with its plate dimensions. The replacement KOR overlay sticker and the mortice lock spindle are on page 45.
Borg's Light Duty 2000 Series leaflet - includes a dimensioned drawing of the 2000 Series keypad.
Borg's 4400 Series brochure - includes a dimensioned drawing of the 4400 Series keypad.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
