Borg BLS212 Button Spring - Suits 2000 Series
The Borg BLS212 is a standard steel push button spring for the keypad of Borg 2000 Series mechanical digital locks. It restores a button's return and feel where the original spring has weakened.
It is the spring for non-marine 2000 Series keypads - the marine grade 2600 Series takes the stainless steel BLSS212 instead - and it is special order, non-returnable.
The BLS212 is brought in to order and cannot be returned for change of mind, so confirm it is the right spring for your lock and contact us for the current lead time before ordering. Your rights under the Australian Consumer Law for faulty goods are unaffected.
Key Features
- Standard steel push button spring for Borg 2000 Series digital keypads.
- Restores correct button return and tactile feel.
- For non-marine 2000 Series keypads - the 2600 Series takes the stainless steel BLSS212.
- Genuine Borg service part, supplied individually.
What's in the Box
- 1 x standard steel push button spring
Suitable Uses
- Servicing the keypad of a non-marine Borg 2000 Series lock.
- Replacing a weak or missing button spring.
Item Code Family - Borg 2000 Series Keypad Springs
Compatible Locks
The BLS212 is the button spring for the non-marine Borg 2000 Series keypads - the On The Bench locks and replacement keypads below. The 2600 Series (External Grade and Marine Grade Pro) takes the stainless steel BLSS212 instead.
For an Easicode Pro (ECP) lock, or any model not listed here, contact us before ordering and we will confirm the right spring.
For a wider set of spares in one order, the BL2000KIT complete accessories packet holds screws, code tumblers, springs and posts for the BL2000 series.
Full Specifications
Frequently Asked Questions
The BLS212 is the standard steel spring for non-marine 2000 Series keypads. Borg's marine grade keypads - the 2600 Series - take the stainless steel BLSS212. MG Pro and ECP explained shows how to tell the ranges apart.
Borg's BL2000 Series manual shows the plate inside the keypad carrying 14 small springs. This listing is a single spring, so order the number you need.
We have confirmed it for the On The Bench locks and keypads tabled above. For an Easicode Pro lock, contact us before ordering and we will check the right spring.
The lock comes off the door and the keypad is opened on the bench to reach the springs - the same strip-down as an On The Bench code change. It is fiddly work, so if you would rather not, contact us.
Additional Information
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Borg's installation manual for the BL2000 Series - parts list, handing, fitting, the code change and a problem solving guide. The code change steps show the plate inside the keypad that carries its 14 small springs. (Host lock document.)
Borg's one-page On The Bench code change sheet, headed BL 2000 - the lock comes off the door and the cover plate comes off the coding chamber. (Host lock document.)
The Australian distributor's one-page BL2000 Series accessories sheet - the keypad-only unit, Lockwood conversion kits and scar plates for the 2000 Series. It does not list the button springs. (Host lock series document.)
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
PDF Files - BLS212
Borg's installation manual for the BL2000 Series - parts list, handing, fitting, the code change and a problem solving guide. The code change steps show the plate inside the keypad that carries its 14 small springs. (Host lock document.)
Borg's one-page On The Bench code change sheet, headed BL 2000 - the lock comes off the door and the cover plate comes off the coding chamber. (Host lock document.)
The Australian distributor's one-page BL2000 Series accessories sheet - the keypad-only unit, Lockwood conversion kits and scar plates for the 2000 Series. It does not list the button springs. (Host lock series document.)
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
