Borg BLSS203 Inside Handle Return Spring - Suits 2600 Series - Satin Stainless Steel
The Borg BLSS203 is the satin stainless steel inside handle return spring assembly for Borg's marine grade 2000 Series mechanical digital locks - the 2600 Series. It is fitted during a service to restore the inside handle's return where the spring has weakened through wear or corrosion.
It is supplied as a single assembly, the non-marine 2000 Series takes the standard BLS203 instead, and it is special order, non-returnable.
The BLSS203 is brought in to order and cannot be returned for change of mind, so confirm it is the right spring for your lock and contact us for the current lead time before ordering. Your rights under the Australian Consumer Law for faulty goods are unaffected.
Key Features
- Inside handle return spring assembly in satin stainless steel.
- For Borg's marine grade 2000 Series locks - the 2600 Series.
- Restores correct handle return after wear or servicing.
- Supplied as a single replacement assembly.
- Genuine Borg service part.
What's in the Box
- 1 x inside handle return spring assembly
Suitable Uses
- Servicing the inside handle of a Borg 2600 Series marine grade lock.
- Restoring handle return where the spring has weakened through wear or corrosion.
Item Code Family - Borg Handle Return Springs
Compatible Locks
The BLSS203 is the inside handle return spring for Borg's marine grade 2600 Series knob locks below. Each is a complete lock with an inside handle - if your door has a replacement keypad fitted, go by the model of the lock it belongs to.
Non-marine 2000 Series locks take the standard BLS203. For a back-to-back, deadbolt or Easicode Pro (ECP) model, or any lock not listed here, contact us before ordering.
Full Specifications
Frequently Asked Questions
When the inside handle no longer returns properly because its spring has weakened through wear or corrosion.
The inside handle - the handle on the inside of the door, not the keypad side. It is supplied as a complete return spring assembly.
No. The BLS203 is the standard assembly for the non-marine 2000 Series. This one is the satin stainless steel assembly for the marine grade 2600 Series.
Borg makes this assembly in satin stainless steel for its marine grade locks. What the marine grade and MG Pro names mean is covered in MG Pro and ECP explained.
Additional Information
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Fitting instructions for the BL2600 Series - strike and latch, drilling, spindle, and fitting the keypad and inside handle. (Host lock document.)
The Australian distributor's one-page BL2000 Series accessories sheet - the keypad-only unit, Lockwood conversion kits and scar plates for the 2000 Series. It does not list the handle return springs. (Host lock series document.)
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
PDF Files - BLSS203
Fitting instructions for the BL2600 Series - strike and latch, drilling, spindle, and fitting the keypad and inside handle. (Host lock document.)
The Australian distributor's one-page BL2000 Series accessories sheet - the keypad-only unit, Lockwood conversion kits and scar plates for the 2000 Series. It does not list the handle return springs. (Host lock series document.)
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
