Borg BLSMGPRO560 / BLSMGPRO570 Tube Latch - 60mm or 70mm Backset - Suits MG Pro 5000 and 7701 Series
The Borg BLSMGPRO560 / BLSMGPRO570 is the replacement tubular latch for Borg MG Pro 5000 Series and 7701 Series digital locks. It is supplied on its own for servicing or retrofit, with an 8mm square spindle and a choice of backset.
It suits MG Pro 5000 and 7701 series, it uses an 8mm square spindle, and it comes in 60mm and 70mm backsets.
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- Replacement tubular latch for Borg MG Pro 5000 Series and 7701 Series locks.
- 8mm square spindle.
- Large face plate, 70 (H) x 29 (W) mm.
- Two backset options - 60mm (BLSMGPRO560) and 70mm (BLSMGPRO570).
- Heavy duty construction. Latch-only supply.
What's in the Box
- 1 x Borg tubular latch (spare part)
Suitable Uses
- Servicing Borg MG Pro 5000 Series digital locks.
- Replacement latch for a Borg 7701 Series lock.
- Doors needing an 8mm square-spindle tubular latch - see latch vs bolt formats.
Available Finish Options
Satin Chrome Face Plate
(This Product)
STK BLSMGPRO560 / BLSMGPRO570
Finish selection does not affect functionality, compliance, or performance.
The latch body is black. The satin chrome face plate is the part seen on the door edge once the latch is fitted.
Item Code Family
Compatible Locks
This latch suits the Borg MG Pro 5000 Series and the BL7701 heavy duty lock - the locks below list it. Confirm the backset your lock uses (60mm or 70mm) before ordering. For the satin chrome 5000 Series latches, see the 60mm and 70mm latches.
Full Specifications
Frequently Asked Questions
No - it is the replacement tubular latch that fits inside your Borg MG Pro 5000 or 7701 Series lock.
No - it is designed for the MG Pro 5000 Series and the 7701 Series. Confirm your lock model first.
Measure from the door edge to the centre of the spindle and match the closest backset - 60mm or 70mm. See measuring your lock backset if unsure.
Additional Information
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Borg's one-page BL5000 Series accessories sheet (LSC) - the keypad-only units, Lockwood conversion kits and scar plates for the 5000 Series locks this latch fits. It does not list the latches themselves.
Borg's two-page marine grade series brochure for the MG Pro 5000 Series locks this latch serves - its series options describe the 60mm backset tubular latch with a 12.5mm latch bolt and anti-thrust pin.
One-page drilling template named for the BL5001, BL5201 and BL5401 - 159mm hole centres, a 30mm centre hole for the latch housing, and both the 60mm and 70mm backset positions.
Borg's six-page instruction manual for the BL7000 ECP series, which covers the BL7701 this latch also suits - preparation, handing and the code change.
Borg's one-page maintenance guide for its mechanical digital locks - a monthly clean with a light silicone-based lubricant, and a yearly service with the lock off the door that takes in the latch and fixings.
PDF Files - BLSMGPRO560 / BLSMGPRO570
Borg's one-page BL5000 Series accessories sheet (LSC) - the keypad-only units, Lockwood conversion kits and scar plates for the 5000 Series locks this latch fits. It does not list the latches themselves.
Borg's two-page marine grade series brochure for the MG Pro 5000 Series locks this latch serves - its series options describe the 60mm backset tubular latch with a 12.5mm latch bolt and anti-thrust pin.
One-page drilling template named for the BL5001, BL5201 and BL5401 - 159mm hole centres, a 30mm centre hole for the latch housing, and both the 60mm and 70mm backset positions.
Borg's six-page instruction manual for the BL7000 ECP series, which covers the BL7701 this latch also suits - preparation, handing and the code change.
Borg's one-page maintenance guide for its mechanical digital locks - a monthly clean with a light silicone-based lubricant, and a yearly service with the lock off the door that takes in the latch and fixings.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
