Carbine CEL-RFID-FOB MIFARE Key Fob - Blue
The Carbine CEL-RFID-FOB is a MIFARE 13.56MHz RFID key fob designed as an additional or replacement credential for Carbine CEL-3IN1 and CEL2 series digital locks. It is sold individually and is compatible with any CEL lock that reads MIFARE (ISO14443 Type A) credentials.
The fob format is a practical alternative to the credit card format CEL-RFID for users who prefer to carry their access credential on a keyring. It is presented to the lock's RFID reader zone in the same way as a card - no contact required, no PIN entry needed. Each fob is programmed directly through the lock's programming mode; no separate programmer or software is required.
Like all CEL RFID credentials, the fob operates at 13.56MHz using the MIFARE chip standard (ISO14443 Type A). It is not compatible with EMV chips used in credit cards (VISA PayWave, Mastercard PayPass), which use ISO14443 Type B.
Key Features
- MIFARE 13.56MHz (ISO14443 Type A) - compatible with Carbine CEL-3IN1 and CEL2 digital locks.
- Keyring-style fob format - attaches to keys or a lanyard for convenient everyday carry.
- Contactless presentation - swipe the fob near the lock's RFID reader zone to unlock; no PIN required.
- Programmed directly through the lock - no separate reader, programmer, or app required.
- Sold individually - order the quantity needed to suit your number of users.
What's in the Box
- 1 x CEL-RFID-FOB MIFARE Key Fob (Blue)
Suitable Uses
- Users who prefer to carry their access credential on a keyring rather than a wallet card
- Additional or replacement credential for an existing CEL-3IN1 or CEL2 installation
- Multi-user residential or light commercial installs requiring individual credential assignment per user
- Issuing access to contractors, cleaners, or tradies without sharing a PIN code
- Short-term rental and Airbnb properties where credential management without key handover is preferred
Full Specifications
Frequently Asked Questions
When would I choose a fob over a card or sticker?
The fob is the practical choice for users who carry their keys rather than a wallet. Attaching the fob to a keyring means there is one less item to manage - the same keys used to operate other locks on the property can carry the RFID credential for the CEL lock. A card suits wallet-carry users; a sticker suits those who want a credential permanently attached to their phone; a fob suits keyring-carry users.
How many RFID credentials can the CEL lock store?
The CEL-3IN1 supports 1 programming code, 25 user PIN codes, and 25 RFID credentials. On the CEL2 series, PIN codes and RFID credentials share a combined pool of 100 credentials total. Fobs, cards, and stickers all draw from the same RFID credential pool. Check the user guide for your specific model to confirm the limits applicable to your installation.
Will any RFID fob work, or does it need to be this specific product?
Any fob using a MIFARE chip (ISO14443 Type A, 13.56MHz) will be compatible with the CEL lock. This Carbine-supplied fob is confirmed compatible. Generic MIFARE fobs from third-party suppliers should also work, but are not Carbine-confirmed - verify the chip specification is MIFARE / ISO14443 Type A before purchasing alternatives.
How do I program the fob into my lock?
Fobs are enrolled directly through the lock's programming mode - the same process used for RFID cards. No separate programmer, software, or app is required. Enter programming mode using the master code, select the Add Credential function, then present the fob to the RFID reader zone on the lock body. Full instructions are in the CEL-3IN1 User Guide PDF linked below.
Is this fob compatible with the CEL2-BT deadbolt?
RFID credential access is available on CEL2-BT leverset models but is not available on the CEL2-BT deadbolt variant. The CEL2-BT deadbolt supports PIN and Bluetooth access only. Confirm your lock model before ordering if RFID access is a requirement.
Additional Information
The CEL lock reads MIFARE credentials only (ISO14443 Type A, 13.56MHz). Credit cards including VISA PayWave and Mastercard PayPass use EMV chips (ISO14443 Type B) and will not register on the lock. MIFARE credentials include Opal cards, Myki cards, generic building access cards, and this CEL-RFID-FOB. When sourcing third-party fobs, confirm the chip type is MIFARE / ISO14443 Type A before purchasing.
On CEL locks, PIN codes and RFID credentials - including fobs, cards, and stickers - all draw from the same shared pool. Adding more RFID credentials reduces the number of available PIN code slots, and vice versa. Plan your credential allocation before issuing fobs across multiple users. Where a mix of credential types is required, it can be useful to assign fobs to keyring-carry users and PIN codes to users who prefer not to carry a physical credential.
If a fob is lost, it can be deleted from the lock individually through programming mode without affecting other enrolled credentials. This is one of the key advantages of RFID credentials over physical keys - a lost fob can be decommissioned immediately without rekeying the lock. Refer to the CEL-3IN1 User Guide for the credential deletion procedure.
Davcor Group – Warranty Against Defects
Davcor Group Pty Ltd (ABN 95 003 562 598) guarantees its products to be free from defects in materials and workmanship from the date of original purchase for the period applicable to the product and brand, as set out in Appendix A of the Davcor Warranty Against Defects. This warranty is for replacement of product only.
Carbine brand products carry a 1 year warranty from date of original purchase (refer to product installation documentation and davcor.com.au/warranty for the period applicable to other Davcor brands).
Brands Covered by the Davcor Warranty
Warranty Exclusions
- Fair wear and tear
- Damage due to faulty installation, misuse, or modification of the product
- Tarnishing or finish damage, including colour change due to weather, salt, or chemical exposure
- Batteries
- Re-installation, travel, or other ancillary costs related to a defective product
- Specially made-to-order products (non-returnable); no credit is given on software, master keys, or manuals
How to Make a Warranty Claim
Claims must be submitted in writing to the place of purchase and include:
- A description of the defect
- Date of supply and proof of purchase
- Your contact details
A return authorisation number must be obtained from Davcor before returning any product. Products can only be returned in their original, complete, and saleable packaging. Davcor must test and confirm the product is defective before any claim is valid.
Direct Davcor contact:
Davcor Group Pty Ltd — 14 John Hines Avenue, Minchinbury NSW 2770
Phone: +61 2 9612 4747 —
Email: warranty@davcor.com.au
Contact us first — we’ll manage your warranty claim with Davcor on your behalf. Call (07) 5601 1867 or submit an enquiry →
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. The Davcor express warranty operates alongside and in addition to your rights under the Australian Consumer Law. Full warranty terms and conditions: davcor.com.au/warranty
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
