FORGE Weather Cover for H60 Outdoor Smart Lock - Galvanised Steel
The FORGE Weather Cover for H60 (FEH60CV) is a matt black, galvanised steel rain hood made by FORGE for the FORGE H60 outdoor smart lock. It fits above the handle and is sealed to the door or gate with silicone, shedding rain away from the keypad and fingerprint reader below.
It is sold singly. FORGE rates both H60 panels IP65 and, where the lock is fully exposed, calls one cover over the inside handle the critical minimum - a cover over each handle gives the best protection. Made for FORGE, an Australian brand based in Ringwood, Victoria.
Usually ships in 24 hours.
Owned by FORGE Electrical (Australia) · Manufactured in China. Our independent FORGE brand profile sets out how the range compares with the other brands we stock.
Key Features
- Custom-made by FORGE for the FORGE H60 outdoor smart lock - the cover FORGE offers with both H60 versions.
- Galvanised steel with a matt black finish.
- Fits above the handle and is secured with silicone.
- Shades the inside handle's controls or the outside keypad and fingerprint reader from rain.
- Sold as a single unit - order two to cover both handles; one of our smart lock accessories.
Compatible Locks
The FORGE H1, H1S, H10D and H10S gate locks take the FORGE H1 weather cover instead. If you are unsure which cover suits your lock, send us the item code before ordering.
What's in the Box
- FORGE weather protection cover for H60 x1
FORGE sells the cover in single units. Use an exterior-grade silicone to fix it; FORGE does not list silicone with the cover.
FORGE FEH60CV - Specifications
Installation
- Fit the lock first, then offer the cover up above the handle so it shades the keypad, fingerprint reader or inside controls below.
- Clean and dry the door or gate surface, run a bead of exterior-grade silicone along the cover's contact edges and press it into place.
- Let the silicone cure before the cover takes rain.
- If you are fitting one cover only, put it over the inside handle - FORGE's minimum for a fully exposed lock.
FORGE's H60 manual sets out the weather limits on its non-warranty disclaimer on page 23.
Frequently Asked Questions
Only where it is fully exposed. FORGE rates both H60 panels IP65 for general outdoor conditions and strongly recommends a cover on a completely exposed door or gate; IP65 does not cover driving rain, hail, salt spray or immersion (IP ratings explained).
The inside handle. FORGE calls one cover over the internal handle the critical minimum on a fully exposed site; a second over the outside handle gives the best protection.
One per handle you want to cover. FORGE sells the cover singly, so covering both handles takes two.
FORGE's instruction is to fix it above the lock with silicone; it names no screws or drilling.
Additional Information
- Made for the H60. It suits both the TTLock and the Forge Smart version of the H60; the H1-series gate locks have their own cover.
- A cover helps but does not change the rating. The H60's IP65 rating and FORGE's weather disclaimer still apply.
- Severe weather? For direct, severe exposure FORGE suggests an IP66 or IP68 lock - see the H1S, the RD1T rim lock or the IP68 H100.
Warranty
2-year FORGE warranty from the date of delivery - covers defects in materials and workmanship under normal use. Excludes improper installation or maintenance, misuse, accident, normal wear and tear (including fading or dulling of finishes) and water damage beyond the product's rated IP protection. Proof of purchase required for all claims. Returns & Warranty | FORGE warranty terms
Download PDF Resources
The manual for the FORGE H60 this cover is made for - page 23 is FORGE's weather disclaimer for outdoor use.
FORGE Weather Cover for H60 - Dimensions
PDF Files - FORGE Weather Cover for H60
The manual for the FORGE H60 this cover is made for - page 23 is FORGE's weather disclaimer for outdoor use.
FORGE Warranty
FORGE Electrical products sold by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries are covered by FORGE's 2-year warranty against defects. All warranty claims are lodged with us, and we liaise with FORGE on your behalf.
Warranty Summary
How to Make a Claim
- Notify us in writing within the 2-year warranty period, including your proof of purchase and a description of the fault.
- We will assess your claim with FORGE and advise the next steps. The product may need to be returned for assessment.
- Where the defect is covered, FORGE will repair or replace the product or faulty part at no charge.
Exclusions
The FORGE warranty does not cover:
- Improper installation, maintenance or operation, including not following FORGE's product specifications or instructions
- Normal wear and tear
- Misuse, abuse, negligence or accident
- Modification by anyone other than FORGE Electrical
- External causes such as natural disasters
- Damage from excessive rain, water ingress, flooding or other liquid exposure beyond the product's rated IP protection level
- Cosmetic ageing of outdoor finishes - light colour fading, surface dulling or minor oxidation from UV exposure, humidity and temperature changes
IP ratings on FORGE outdoor locks are intended for general outdoor conditions - rain, sun and dust. They do not guarantee performance under extreme exposure such as driving rain, hailstorms, constant salt spray, flooding or immersion.
Important Notes
In unusually harsh or exposed locations, FORGE strongly recommends fitting a rain cover or protective hood over the lock to shield it from direct weather and driving rain. If your product has been exposed to water, contact us for support.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The FORGE warranty is in addition to these rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding: