Vault Rebate Kit for Tubular Latch Locks - Double Door Conversion Kit
The Vault Rebate Kit for Tubular Latch Locks (Vault_Tub_Latch_Rebate_Kit) is a stainless steel conversion kit that lets a Vault smart lock fitted with a tubular latch or deadbolt close and lock correctly on rebated double doors - door pairs where one leaf overlaps the other at the meeting stiles. It adapts the latch or bolt face plate and the strike to the stepped profile of a rebated stile, so the bolt reaches a properly seated strike instead of the overlap of the other leaf.
It suits the Vault locks that take a tubular latch at checkout - the Vault Alpha, Vault Zenith, Vault Eclipse, Vault Guardian and Vault Guardian Vision, and the Vault Prime, Vault Neo and Vault Triton on their tubular latch - and the deadbolt-format Vault Nexus and Vault Nexus Vision. A Vault lock fitted with a mortice lock body, or a Vault mortice bought on its own, takes the Vault Rebate Kit for Mortice Locks instead. It is not needed on flush double doors or single doors.
Usually ships in 3 business days.
This kit suits a Vault lock on a tubular latch or deadbolt. If your Vault lock is fitted with a mortice lock body - the Hinged/Swinging Euro, Sliding Hook, 6068 or Innovative Mortice, or the Neo and Triton 5050 mortice - you need the Vault Rebate Kit for Mortice Locks instead. Not sure which body you have? See Which Vault Rebate Kit Do I Need? below.
Key Features
- Converts a Vault tubular latch or deadbolt installation for rebated (overlapping) double doors
- Stainless steel rebate plate, strike box and strike plate, supplied with countersunk fixing screws
- Suits every Vault smart lock with a tubular latch option, and the Nexus and Nexus Vision deadbolts
- Keeps the latch or bolt face and the strike correctly aligned across the step of the rebate
- Suitable for residential and commercial door pairs, timber or metal
- Not required on flush double doors or single doors, and not for mortice lock bodies - those take the mortice rebate kit
What's Included
- Rebate plate for the latch or bolt face, with a round bolt aperture
- Rebate strike box - a folded stainless steel channel with two fixing flanges
- Strike plate with radiused corners and a bolt aperture
- 4 x countersunk fixing screws
Contents as pictured.
Suitable Uses
- Rebated (overlapping) hinged double doors in residential or commercial settings
- A Vault smart lock ordered with the 60mm tubular latch option - the Vault Alpha, Vault Zenith, Vault Eclipse, Vault Guardian and Vault Guardian Vision
- A Vault Prime, Vault Neo or Vault Triton fitted with its tubular latch rather than its mortice
- A Vault Nexus or Vault Nexus Vision deadbolt on a rebated door pair
- Timber or metal rebated door sets - see also our other rebate kits and strikes for smart locks
Which Vault Rebate Kit Do I Need?
Vault makes two rebate kits, and the right one depends on the lock body on your door - not on the smart lock model. Look at the door edge: a long rectangular face plate carrying a latch and a bolt (or a hook) is a mortice; a single round spring bolt through a small face plate is a tubular latch; a single square bolt through a round bored hole is a deadbolt. Many Vault locks can be ordered either way, so check which body you chose at checkout.
Available Finish Options
Stainless Steel
(This Product)
STK Vault_Tub_Latch_Rebate_Kit
Finish selection does not affect functionality, compliance, or performance.
Compatible Vault Locks
This rebate kit suits the following Vault locks on a rebated double door, with the lock body shown. Always confirm the latch or bolt position and strike alignment on your pair before ordering:
- Vault Alpha - 60mm tubular latch option
- Vault Zenith - 60mm tubular latch option
- Vault Eclipse - 60mm tubular latch option
- Vault Guardian - 60mm tubular latch option
- Vault Guardian Vision - 60mm tubular latch option
- Vault Prime - tubular latch (single-tongue) lock body
- Vault Neo - tubular latch option
- Vault Triton - tubular latch option
- Vault Nexus - deadbolt in a bored door preparation
- Vault Nexus Vision - deadbolt in a bored door preparation
The same locks fitted with a Vault mortice body, and the push-pull mortice locks (Fortress, Fortress Vision, Quantum, Titan and Olympus), take the Vault Rebate Kit for Mortice Locks. The full Vault line-up is in our Vault smart lock range guide.
Full Specifications
Frequently Asked Questions
Only if the doors are rebated - one leaf overlaps the other where they meet - and the Vault lock on them uses a tubular latch or deadbolt. Flush double doors and single doors do not need a rebate kit at all.
Every Vault lock that can be ordered with the 60mm tubular latch - the Alpha, Zenith, Eclipse, Guardian and Guardian Vision - plus the Prime, Neo and Triton when fitted with their tubular latch, and the Nexus and Nexus Vision deadbolts. The full list is under Compatible Vault Locks. A lock on a Vault mortice body takes the mortice rebate kit.
Look at the edge of the door. A tubular latch is a single round spring bolt through a small face plate; a tubular deadbolt is a single square bolt through a round bored hole; a mortice is a long rectangular face plate with a latch and a bolt (or a hook) behind it. The comparison table above matches each body to its kit.
Yes. The Vault Nexus and Nexus Vision use a deadbolt in a bored door preparation rather than a mortice, and this is the kit that converts that preparation for a rebated pair. Confirm the bolt position and strike alignment on your doors before ordering.
The plates pack the latch or bolt face and the strike out to the step of the rebate, so accurate positioning is what matters - a strike that is a few millimetres out is the usual reason a lock on a rebated pair will not latch. See our notes on choosing the wrong hardware and poor door preparation, or ask about professional fitting through our Advice and Installation service.
Additional Information
Warranty
Vault Smart Locks products purchased in Australia are covered against defects in materials and workmanship under normal residential or commercial use for:
- Standard range: 12 months from the date of purchase
- Select Signature Range models: 24 months (as stated on the product listing or packaging)
Returns & Warranty|View Vault Warranty Policy
This warranty operates in addition to your rights under the Australian Consumer Law.
Vault Warranty
Vault Smart Locks products are backed by a manufacturer's warranty against defects in materials and workmanship under normal residential or commercial use. All claims are handled locally by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries - start with us and we'll manage the process with Vault on your behalf.
Warranty Summary
How to Make a Claim
- Contact Terry's Gold Coast Smart Locks through the Returns & Warranty page above, with your proof of purchase (invoice or receipt).
- Have your product model and serial number (if applicable) ready, along with a brief description of the fault and your installation address.
- We assess your claim with Vault and advise the outcome and next steps. You may be asked to return the product for inspection.
What This Warranty Does Not Cover
- Normal wear and tear.
- Cosmetic damage that does not affect performance.
- Damage caused by incorrect installation, misuse, neglect, modification, or accident.
- Damage due to improper handling, or installation by an unlicensed technician.
- Products that have been disassembled, tampered with, or where the security seal or warranty label has been removed.
- Battery leakage or failure, or damage caused by incorrect battery usage.
- Environmental or weather damage caused by use outside recommended operating conditions.
- Labour, installation, or removal costs associated with replacing or reinstalling products.
- Work performed before warranty approval or assessment.
Important Notes
Where a Vault product carries an Ingress Protection (IP) rating, that rating is stated on the individual product listing, packaging or technical documentation. Unless stated otherwise in writing, the IP rating applies only to the external-facing side of the lock - not to the internal assembly, handle, battery compartment, electronics, cables or connectors. The internal side must be installed in a dry, sheltered position. An IP rating describes water resistance, not waterproofing: the lock must not be submerged, pressure washed, or exposed beyond its stated rating, and all seals, gaskets and covers must be correctly fitted and undamaged.
Vault's manufacturer policy applies a warranty assessment holding fee, which is refundable if the fault is found to be covered under warranty. If a product is assessed as outside warranty or damaged by an excluded cause, a discounted replacement may be offered. We will confirm any applicable fees and options with you before any assessment proceeds.
This warranty is provided in addition to your rights under the Australian Consumer Law (ACL). Our goods come with guarantees that cannot be excluded under the ACL. You are entitled to a replacement or refund for a major failure, and to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
