Borg BLS505N 7mm Spindle Set - Suits 5001 Series
The Borg BLS505N is the 7mm square spindle set with flat bar ends for the Borg BL5001 lever lock. It carries the drive between the keypad and the lever and is supplied as a set.
It is listed as a 7mm set and is the correct spindle set for the BL5001 and the BL5001 MG Pro ECP. The 5000 Series lever and knob locks listed on the 8mm BLS506N set page take that set instead, so confirm your lock model before ordering.
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- 7mm square spindle with flat bar ends.
- Supplied as a set.
- The correct spindle set for the BL5001 and BL5001 MG Pro ECP lever locks.
- For installation, servicing or spindle replacement.
What's in the Box
- 1 x Borg 7mm spindle set (BLS505N)
Suitable Uses
- Installing or servicing a Borg BL5001 lever lock.
- Replacing a damaged or incorrectly sized spindle.
- Part of the wider Borg digital mechanical lock range Terry's stocks and services.
Item Code Family - Borg 5000 Series Spindles
Compatible Locks
The BLS505N is the spindle set for the two Borg BL5001 lever locks below.
Fitting a knob in place of the lever? The Borg 5000 Series knobs - stainless steel, chrome plate, Marine Grade Pro black and polished brass - retrofit in place of a standard lever, and on a BL5001 this 7mm set is the spindle set that matches the lock.
The 5000 Series lever and knob locks listed on the 8mm BLS506N set page take that set, and BL5701 key override locks take their own sprung spindle.
Full Specifications
Frequently Asked Questions
No. This 7mm set is for the BL5001 and the BL5001 MG Pro ECP. The 8mm set, BLS506N, is for the 5000 Series lever and knob locks in its compatible locks table.
It is supplied as a matched set rather than a single cut length, so the correct spindle parts are kept together for the lock.
Match the spindle to the lock model. The BL5001 and BL5001 MG Pro ECP take this 7mm set, the 5000 Series lever and knob locks on the 8mm BLS506N set page take that set, and BL5701 key override locks take their own sprung spindle. See the Borg manuals below for spindle fitting, or contact us.
Additional Information
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Borg's five-page manual for the On The Bench (non-ECP) BL5000 Series - parts list, handing, BL5001 fitting (mortice sizes and spindle selection), the code change, troubleshooting and the drilling template. (Host lock document.)
Borg's Easicode Pro instructions as six one-page segments. Page 3 covers spindle fitting and positioning by lock type, with the 15mm blade engagement rule. (Host lock series document.)
The Australian distributor's one-page BL5000 Series accessories sheet - the keypad-only units, Lockwood conversion kits and scar plates for the 5000 Series. It does not list the spindle sets. (Host lock series document.)
PDF Files - BLS505N
Borg's five-page manual for the On The Bench (non-ECP) BL5000 Series - parts list, handing, BL5001 fitting (mortice sizes and spindle selection), the code change, troubleshooting and the drilling template. (Host lock document.)
Borg's Easicode Pro instructions as six one-page segments. Page 3 covers spindle fitting and positioning by lock type, with the 15mm blade engagement rule. (Host lock series document.)
The Australian distributor's one-page BL5000 Series accessories sheet - the keypad-only units, Lockwood conversion kits and scar plates for the 5000 Series. It does not list the spindle sets. (Host lock series document.)
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
