Borg BL2000KIT Complete Accessories Packet - Suits 2000 Series
The Borg BL2000KIT complete accessories packet is a spare parts kit for Borg 2000 Series mechanical digital locks. It holds the small parts most often needed at a service or a code change - screws, code tumblers, springs and posts.
It suits Borg BL2000 series locks and their replacement keypads.
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- Spare parts kit for Borg BL2000 series digital locks.
- Contains screws, code tumblers, springs and posts.
- Supports servicing, repair and On The Bench code changes.
- Genuine Borg parts to maintain correct fit and operation.
What's in the Box
- Screws
- Code tumblers
- Springs
- Posts
Borg doesn't give a count for each part. If you need a set number of one item, order it on its own - the parts sold separately are in the table below - or contact us.
Suitable Uses
- Servicing and repairing Borg BL2000 series locks.
- Keeping spares on hand for On The Bench code changes.
Item Code Family - Borg 2000 Series Service Parts
Compatible Locks
The packet is for Borg BL2000 series locks. The locks and replacement keypads whose own spares tables list it are below.
Spare tumblers sold on their own - the S213 and S214 - are for On The Bench locks only, so for an Easicode Pro lock contact us before ordering the packet for its tumblers. For any 2000 Series model not listed here, contact us and we will confirm the fit.
Full Specifications
Frequently Asked Questions
Screws, code tumblers, springs and posts for a Borg BL2000 series lock. Borg doesn't quote a count for each, so for a set number of one part, order it individually - the tumblers, button spring, handle return spring and gasket are all sold separately (see the table above).
No. A Borg 2000 Series lock is supplied with spare tumblers and tweezers for an On The Bench code change, so the packet is for when parts have been lost or worn. If you expect to change codes regularly, an Easicode Pro lock changes code on the door - see the code change methods compared.
Two Easicode Pro locks list the packet among their spares - the BL2201SCECP and BL2401SCECP. The spare tumblers sold on their own are for On The Bench locks only, so contact us before ordering the packet for an Easicode Pro lock's tumblers.
No - the packet is for the BL2000 series. The 5000 Series has its own spring packet and its own tumblers, the S515 and S514.
Additional Information
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Borg's installation manual for the BL2000 Series - parts list, handing, fitting, the code change and a problem solving guide. Its parts list names the screws, support posts and spare tumblers a new lock is supplied with. (Host lock document.)
Borg's one-page On The Bench code change sheet, headed BL 2000 - the coded and non-coded tumblers are repositioned with tweezers while C is held down. (Host lock document.)
The Australian distributor's one-page BL2000 Series accessories sheet - the keypad-only unit, Lockwood conversion kits and scar plates for the 2000 Series. It does not list the accessories packet. (Host lock series document.)
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
PDF Files - BL2000KIT
Borg's installation manual for the BL2000 Series - parts list, handing, fitting, the code change and a problem solving guide. Its parts list names the screws, support posts and spare tumblers a new lock is supplied with. (Host lock document.)
Borg's one-page On The Bench code change sheet, headed BL 2000 - the coded and non-coded tumblers are repositioned with tweezers while C is held down. (Host lock document.)
The Australian distributor's one-page BL2000 Series accessories sheet - the keypad-only unit, Lockwood conversion kits and scar plates for the 2000 Series. It does not list the accessories packet. (Host lock series document.)
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
