Borg BL2600S220 Spindle - 100mm Stainless Steel - Suits 2600 Series
The Borg BL2600S220 is a 100mm stainless steel flat bar spindle for the Borg 2600 Series mechanical digital locks. It turns the follower between the outside keypad and the inside handle.
Stainless steel resists corrosion, which is why it is the spindle for the marine grade 2600 Series locks. Borg's Australian distributor also lists it for Borg 2000 and 4000 Series keypads. It is supplied as a single spindle, with no keypad or handle.
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- Flat bar drive spindle for the Borg 2600 Series.
- Stainless steel construction for corrosion resistance.
- 100mm overall length.
- Also listed by Borg's Australian distributor for Borg 2000 and 4000 Series keypads.
- Supplied as a single spindle - no keypad or handle.
- Direct replacement for a worn or corroded spindle.
What's in the Box
- 1 x Borg stainless steel flat bar drive spindle (100mm)
Suitable Uses
Use this spindle when installing or servicing a Borg 2600 Series lock from our digital mechanical locks range, or to replace a spindle that has begun to corrode. It is one of the Borg lock spare parts we keep for the 2600 Series.
Item Code Family - Borg 2000 and 2600 Series Spindles
Compatible Locks
The BL2600S220 is the stainless steel spare spindle for the Borg 2600 Series knob locks below.
Borg's Australian distributor also lists it for Borg 2000 Series and 4000 Series keypads, so it is the stainless steel option where one is wanted on those locks - check that 100mm suits the door. The 2000 Series' own spindles are the standard spindle and the long 115mm spindle.
Borg supplies some models with a single sprung spindle of their own - the BL2400 Easicode Pro lever, the 2600 Series Easicode Pro knob locks, the BL2700 key override locks and the 4400 Series Easicode Pro gate locks. A plain spindle may not suit those, so contact us and we will confirm the right part.
The matching 2600 Series keypad cover is the other common 2600 service part. For why the marine grade range exists, see MG Pro and ECP explained, or Chapter 16, Mechanical Digital Locks for the wider range.
Full Specifications
Frequently Asked Questions
The 2600 Series is Borg's external and marine grade range, and a stainless steel spindle resists corrosion.
Borg's Australian distributor lists it for Borg 2000 Series and 4000 Series keypads as well as the 2600 Series, so it is the stainless steel option at 100mm for those locks. The 2000 Series' own spindles are the standard and long spindles. Models supplied with a sprung spindle are the exception - contact us for those.
No - it is the spindle only. The 2600 Series keypad cover is the other common 2600 service part.
Additional Information
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Fitting instructions for the BL2600 Series locks this spindle suits - strike and latch, drilling, fitting and positioning the spindle, and fitting the keypad and inside handle. (Host lock document.)
Borg's one-page maintenance guide for its mechanical digital locks - a monthly clean with a light silicone-based lubricant, and a yearly service with the lock off the door.
PDF Files - BL2600S220
Fitting instructions for the BL2600 Series locks this spindle suits - strike and latch, drilling, fitting and positioning the spindle, and fitting the keypad and inside handle. (Host lock document.)
Borg's one-page maintenance guide for its mechanical digital locks - a monthly clean with a light silicone-based lubricant, and a yearly service with the lock off the door.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
