Borg Mechanical Digital BL4401MGProECP Gate Lock - Lever/Lever - Marine Grade Pro - Easicode - Black
At A Glance
At A Glance
FINISHBlack - MG Pro Coating
DISPATCHSame Day Before 11am
PIN CodeThe Borg BL4401 MG Pro ECP is a medium-heavy duty fully mechanical digital lock combining a lever/lever configuration with Easicode Pro (ECP) on-gate code change. Designed specifically for external wooden and timber gates and doors, it uses the same lever keypad housing as the BL3400 gate lock series but is supplied with a 60mm anti-thrust tubular latch suited to wooden gate and door applications. 316 stainless steel internal components, MG Pro black marine grade external coating, and 1,000 hours salt spray testing make it the correct choice for harsh coastal and marine environments - see our MG Pro explained guide for what that coating actually means.
The external lever is free-turning until the correct PIN is entered, then releases to retract the latch. The inside lever is always free to turn for immediate egress. An optional holdback function allows the inside lever to be held open for free passage - removable if not required, see our Passage Mode vs Holdback Mode guide for the full picture. The lock is fully mechanical, requires no batteries, and has no wiring of any kind. It accepts doors and gates from 35mm to 85mm thick using the supplied fixing kit.
Estimated Warehouse Dispatch
Usually same day if ordered before 11am AEST (excluding weekends and Qld public holidays)
Usually same day if ordered before 11am AEST (excluding weekends and Qld public holidays)
Installing on a Narrow Aluminium Gate Frame?
This lock ships standard with a 60mm backset tubular latch. If you're mounting on an external gate with a 50mm × 50mm (or similar narrow) aluminium frame, the standard 60mm latch will not fit. Order the matching 28mm backset latch instead - BLS272000LH (left hand) or BLS272000RH (right hand), sold separately. See our gate post too narrow for a 60mm latch guide for the full range of narrow-stile options if you're not sure which backset your frame needs.
This lock ships standard with a 60mm backset tubular latch. If you're mounting on an external gate with a 50mm × 50mm (or similar narrow) aluminium frame, the standard 60mm latch will not fit. Order the matching 28mm backset latch instead - BLS272000LH (left hand) or BLS272000RH (right hand), sold separately. See our gate post too narrow for a 60mm latch guide for the full range of narrow-stile options if you're not sure which backset your frame needs.
Marine Grade Pro - 316 Stainless Steel - 1,000 Hour Salt Spray Tested
316 stainless steel internal components with MG Pro black marine external grade coating. Tested to 1,000 continuous hours of salt spray. Suitable for coastal, beachside, canal-front, and marine environments where standard finishes corrode prematurely - see the salt spray hours comparison and our honest brand corrosion comparison if you're weighing this up against other brands.
316 stainless steel internal components with MG Pro black marine external grade coating. Tested to 1,000 continuous hours of salt spray. Suitable for coastal, beachside, canal-front, and marine environments where standard finishes corrode prematurely - see the salt spray hours comparison and our honest brand corrosion comparison if you're weighing this up against other brands.
Corrosion Resistance Warranted - 12 Months
Borg warrants corrosion resistance for 12 months from date of sale under specified conditions - see full warranty details.
Borg warrants corrosion resistance for 12 months from date of sale under specified conditions - see full warranty details.
What Is an Anti-Thrust Tubular Latch?
This lock's 60mm tubular latch is anti-thrust - built with a shaped bolt and an internal deadlocking plunger that stops the bolt being pushed straight back once the door or gate is closed. A basic spring latch can sometimes be forced open from outside by sliding a knife, card, or similar thin tool between the door and frame to push the bevelled bolt back ("loiding"); the anti-thrust mechanism blocks that specific trick. It doesn't turn the latch into a deadbolt, but it closes off the simplest form of manual manipulation - worthwhile extra security on a gate or external door secured by a keypad alone. See the dimensioned latch drawings for exactly how the bolt and strike plate are shaped, or the FAQ for more detail.
This lock's 60mm tubular latch is anti-thrust - built with a shaped bolt and an internal deadlocking plunger that stops the bolt being pushed straight back once the door or gate is closed. A basic spring latch can sometimes be forced open from outside by sliding a knife, card, or similar thin tool between the door and frame to push the bevelled bolt back ("loiding"); the anti-thrust mechanism blocks that specific trick. It doesn't turn the latch into a deadbolt, but it closes off the simplest form of manual manipulation - worthwhile extra security on a gate or external door secured by a keypad alone. See the dimensioned latch drawings for exactly how the bolt and strike plate are shaped, or the FAQ for more detail.
Easicode Pro - On-Door/Gate Code Change
The PIN code can be changed while the lock is installed using the included code change key. No lock removal, no tools, no programming device required - see our Borg ECP code-change guide for the full step-by-step with photos. An optional code change disabling plug is included to prevent unauthorised code changes once set. Compare this to the non-ECP BL4401MGPRO, which uses the fiddlier on-the-bench code change method instead.
The PIN code can be changed while the lock is installed using the included code change key. No lock removal, no tools, no programming device required - see our Borg ECP code-change guide for the full step-by-step with photos. An optional code change disabling plug is included to prevent unauthorised code changes once set. Compare this to the non-ECP BL4401MGPRO, which uses the fiddlier on-the-bench code change method instead.
Fully Mechanical - No Batteries Required
Entirely mechanical. No power source, no wiring, and no battery maintenance at any point.
Entirely mechanical. No power source, no wiring, and no battery maintenance at any point.
Designed for light to medium usage - medium-heavy duty wooden/timber gate and door applications
Not suitable for high traffic commercial use
For heavy duty (read our what actually makes a lock heavy duty guide first), consider the Lockwood DX, Borg BL7701, or Carbine CDL7000 Series.
For heavy duty (read our what actually makes a lock heavy duty guide first), consider the Lockwood DX, Borg BL7701, or Carbine CDL7000 Series.
Single PIN Code Only
The BL4401 MG Pro ECP accepts one active PIN code at a time.
The BL4401 MG Pro ECP accepts one active PIN code at a time.
Access Methods
Key Features
- Lever/lever configuration - free-turning external lever until the correct code is entered; inside lever always free for immediate egress.
- Easicode Pro (ECP) on-door/gate code change - no lock removal required; code change key included, see how it works.
- Optional code change disabling plug - prevents unauthorised code changes once set.
- Marine Grade Pro (MG Pro) black external coating - 316 stainless steel internal components.
- 1,000 hour continuous salt spray tested; corrosion resistance warranted 12 months.
- Fully mechanical - no batteries, no wiring, no power source.
- Over 4,000 user-defined code combinations; 14-button keypad.
- 60mm backset anti-thrust tubular latch (50mm and 70mm available separately).
- Optional holdback function - inside lever held open for free passage; removable if not required.
- Reversible on site for left or right hand swing.
- Suitable for wooden and timber gates and doors, 35mm to 85mm thick.
- 8mm flat bladed sprung spindle; M4 s/steel fixings supplied.
- Medium-heavy duty - shares same lever keypad housing as the BL3400 gate lock series.
What's in the Box
- Borg BL4401 MG Pro ECP digital keypad unit (external lever, MG Pro coating)
- Inside lever handle assembly (MG Pro coating)
- 60mm backset anti-thrust stainless steel tubular latch
- Strike plate
- 8mm flat bladed sprung spindle
- M4 stainless steel fixing screws (suits doors up to 85mm thick)
- Easicode Pro code change key
- Optional code change disabling plug
Suitable Uses
- External timber and wooden pedestrian gate access in residential, strata, and coastal properties
- Pool gates in beachside, waterfront, and coastal environments - see our pool gate treatment guide for the compliance basics before you specify
- Shed and outbuilding access doors requiring keyless entry with marine grade durability
- Applications where code changes need to be performed on-site without removing the lock
- Managed property gates where code resets between tenancies are routine
- Heavier gate and door constructions up to 85mm thick
- Applications where a holdback function is wanted for busy periods, provided the gate is never a fire door - see the fire door exclusion
Borg BL4400 Series - Related Models
Both models are marine grade pro, lever/lever configuration, designed for external wooden and timber gates and doors. Fully mechanical - no batteries required. See our Borg naming conventions guide if the model codes look cryptic.
Accessories and Spares
Full Specifications
Dimensions
External keypad dimensions - BL4400 series
Inside handle and latch dimensions - BL4400 series
60mm anti-thrust tubular latch - isometric dimensional drawing
60mm anti-thrust tubular latch - plan and elevation dimensions
Frequently Asked Questions
What is the difference between the BL4401MGPROECP and the BL4401MGPRO?
Both are marine grade pro lever/lever locks designed for wooden and timber gates and doors. The ECP model allows the PIN code to be changed on the door using the included code change key - no lock removal required. The non-ECP model (BL4401MGPRO) uses the on the bench code change method, requiring the keypad to be removed and the pins rearranged by hand - genuinely fiddly. The ECP model also accepts slightly thicker doors (up to 85mm vs 80mm) and offers 4,000+ code combinations; the non-ECP offers 8,000+. If you think you'll ever want to change the code more than once, ECP is worth the extra cost.
Both are marine grade pro lever/lever locks designed for wooden and timber gates and doors. The ECP model allows the PIN code to be changed on the door using the included code change key - no lock removal required. The non-ECP model (BL4401MGPRO) uses the on the bench code change method, requiring the keypad to be removed and the pins rearranged by hand - genuinely fiddly. The ECP model also accepts slightly thicker doors (up to 85mm vs 80mm) and offers 4,000+ code combinations; the non-ECP offers 8,000+. If you think you'll ever want to change the code more than once, ECP is worth the extra cost.
How do I change the PIN code?
With the door or gate in the open position, enter the current code. Insert the included code change key into the hole in the * button and hold it down. Press C to clear the existing code. Enter your new code, then press all the digits once more to confirm they are set. Release the key from the * button, then press C or rotate the lever to finalise. Test the new code at least five times before closing the gate. If a mistake is made, press C to cancel and start again from step one. See our ECP code change steps and why testing five times matters for the full picture.
With the door or gate in the open position, enter the current code. Insert the included code change key into the hole in the * button and hold it down. Press C to clear the existing code. Enter your new code, then press all the digits once more to confirm they are set. Release the key from the * button, then press C or rotate the lever to finalise. Test the new code at least five times before closing the gate. If a mistake is made, press C to cancel and start again from step one. See our ECP code change steps and why testing five times matters for the full picture.
Does the lock work on aluminium gate frames?
The BL4401 MG Pro ECP is designed for wooden and timber gates. If fitting to a narrow aluminium frame (50mm x 50mm or similar), the standard 60mm tubular latch included in the box will not align correctly - see the warning above. An extended latch (BLS272000LH / BLS272000RH) is required for aluminium gate frame applications. For purpose-built metal box-section gate locks, see our gate post too narrow guide for the full comparison of options.
The BL4401 MG Pro ECP is designed for wooden and timber gates. If fitting to a narrow aluminium frame (50mm x 50mm or similar), the standard 60mm tubular latch included in the box will not align correctly - see the warning above. An extended latch (BLS272000LH / BLS272000RH) is required for aluminium gate frame applications. For purpose-built metal box-section gate locks, see our gate post too narrow guide for the full comparison of options.
Is this lock suitable for pool gate compliance in Queensland?
The BL4401 MG Pro ECP provides keyless access and auto-latches on door closing, which aligns with the self-latching requirement of the Queensland Pool Safety Standard. Full pool gate compliance requires confirmation with a licensed pool safety inspector, as requirements include self-closing mechanisms, latch height positioning, and gate clearance specifications. See our pool gate latch treatment guide for the canonical rundown, and note that holdback/passage functions have their own compliance rules if you're planning to use one on a pool gate. Terry's can advise on the correct latch and installation configuration for your specific gate - see our advice and installation page.
What does "anti-thrust tubular latch" actually mean?
It refers to a tubular latch with a built-in deadlocking plunger that stops the bolt being pushed straight back once the door is closed. A basic spring latch can sometimes be forced by sliding a knife or card between the door and frame to push the bevelled bolt in - the anti-thrust mechanism blocks exactly that manoeuvre. It's not a substitute for a deadbolt, but it's a genuine step up from a plain tubular latch and standard on this product. See the callout above for the full explanation and the dimensioned latch drawings below.
It refers to a tubular latch with a built-in deadlocking plunger that stops the bolt being pushed straight back once the door is closed. A basic spring latch can sometimes be forced by sliding a knife or card between the door and frame to push the bevelled bolt in - the anti-thrust mechanism blocks exactly that manoeuvre. It's not a substitute for a deadbolt, but it's a genuine step up from a plain tubular latch and standard on this product. See the callout above for the full explanation and the dimensioned latch drawings below.
Additional Information
Lever vs Knob - Why It Matters
The BL4401 uses lever handles on both sides rather than the knob used on the BL2600/BL3400 series. A lever requires less grip force and torque than a knob, making it suitable for heavier or outward-opening gates and for users who may find a knob difficult to turn - including elderly users or those with limited hand strength. For applications where knob operation is preferred, see the BL2601 or BL3401 series in the Borg range.
The BL4401 uses lever handles on both sides rather than the knob used on the BL2600/BL3400 series. A lever requires less grip force and torque than a knob, making it suitable for heavier or outward-opening gates and for users who may find a knob difficult to turn - including elderly users or those with limited hand strength. For applications where knob operation is preferred, see the BL2601 or BL3401 series in the Borg range.
Marine Grade Maintenance
Monthly: clean the keypad and lever surfaces with a light spray of silicon-based lubricant (GT85 or equivalent); remove excess with a soft cloth. Do not use oil-based lubricants such as WD-40 - they attract dirt and degrade internal components. Annually: remove the lock and spray internally through the button holes; test all buttons and the lever operation. Refer to the Borg Servicing Guide PDF for full maintenance instructions.
Monthly: clean the keypad and lever surfaces with a light spray of silicon-based lubricant (GT85 or equivalent); remove excess with a soft cloth. Do not use oil-based lubricants such as WD-40 - they attract dirt and degrade internal components. Annually: remove the lock and spray internally through the button holes; test all buttons and the lever operation. Refer to the Borg Servicing Guide PDF for full maintenance instructions.
50mm and 70mm Backset Latches
The 60mm backset latch is included in the box. 50mm and 70mm backset latches are available separately to suit different door and gate frame configurations. Confirm the correct backset before installation and order the correct latch if required before starting the job - see our measuring your lock backset guide if you're not sure how to check.
The 60mm backset latch is included in the box. 50mm and 70mm backset latches are available separately to suit different door and gate frame configurations. Confirm the correct backset before installation and order the correct latch if required before starting the job - see our measuring your lock backset guide if you're not sure how to check.
Borg Locks Warranty - 12 Months (Australia)
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty.
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty.
Purchased through Terry's Locksmiths or one of its trading brands? Contact Terry's Locksmiths first - we'll manage your warranty claim with the Australian distributor on your behalf. This warranty operates alongside your rights under the Australian Consumer Law.
Download PDF Resources
Borg BL4400 ECP Series Product Brochure (PDF)
Single-model specification sheet covering the BL4401 ECP - features, MG Pro finish, dimensions and code change instructions.
Single-model specification sheet covering the BL4401 ECP - features, MG Pro finish, dimensions and code change instructions.
Borg BL4000 ECP Series Code Change Instructions (PDF)
On-door Easicode Pro code change procedure - the document header says BL2000 but the same method applies to the BL4000 series.
On-door Easicode Pro code change procedure - the document header says BL2000 but the same method applies to the BL4000 series.
Borg BL4400 Series Brochure (PDF)
Whole-series overview covering BL4401 (tubular latch), BL4402 (Ali-Latch), BL4440 (back to back) and BL4409 (rim fixed slam latch) - useful for comparing this product against its siblings.
Whole-series overview covering BL4401 (tubular latch), BL4402 (Ali-Latch), BL4440 (back to back) and BL4409 (rim fixed slam latch) - useful for comparing this product against its siblings.
Borg Lock Servicing Guide (PDF)
General maintenance guidance for Borg mechanical pushbutton keypad locks.
General maintenance guidance for Borg mechanical pushbutton keypad locks.
Borg BL4401MGPROECP - FAQ, Setup and Owner's Guide
For the wider picture, see Buyer's Guide Chapter 16 - Gate Keypad Locks and our Lockwood vs Borg vs Carbine comparison.
Gate Frame Compatibility
My gate frame is narrower than 60mm - what are my options?
The 60mm latch supplied in the box needs a wide enough stile to fit. For narrow aluminium frames around 50mm x 50mm, the 28mm backset latch (BLS272000LH / BLS272000RH) is the fix. If your stile is a genuinely unusual size, our full narrow-stile options guide covers every backset, forend, and box-mounting option available, including creative fixes like scar plates and packer plates for awkward retrofits.
The 60mm latch supplied in the box needs a wide enough stile to fit. For narrow aluminium frames around 50mm x 50mm, the 28mm backset latch (BLS272000LH / BLS272000RH) is the fix. If your stile is a genuinely unusual size, our full narrow-stile options guide covers every backset, forend, and box-mounting option available, including creative fixes like scar plates and packer plates for awkward retrofits.
Do I need to know my gate's handing before ordering?
No - this lock is reversible on site, so it will work on either a left-hand or right-hand swinging gate without a separate handed SKU. If you're not sure what "handing" even means for your gate, our door handing explainer covers the LHI/RHI/LHO/RHO conventions used in Australia.
No - this lock is reversible on site, so it will work on either a left-hand or right-hand swinging gate without a separate handed SKU. If you're not sure what "handing" even means for your gate, our door handing explainer covers the LHI/RHI/LHO/RHO conventions used in Australia.
Marine Grade and Coastal Use
How close to the coast can this actually go?
MG Pro is Borg's top marine grade tier, tested to 1,000 hours of continuous salt spray - genuinely suitable for beachfront, canal-front, and pool-adjacent installs where a standard finish would corrode within a season. Our do you actually need MG Pro guide gives the honest answer for borderline cases.
MG Pro is Borg's top marine grade tier, tested to 1,000 hours of continuous salt spray - genuinely suitable for beachfront, canal-front, and pool-adjacent installs where a standard finish would corrode within a season. Our do you actually need MG Pro guide gives the honest answer for borderline cases.
How does Borg's MG Pro compare to other brands' marine finishes?
Our honest corrosion comparison puts real salt-spray hour figures for Borg, Lockwood and Carbine side by side rather than relying on marketing claims - worth a read if you're comparing brands for a genuinely harsh coastal install.
Our honest corrosion comparison puts real salt-spray hour figures for Borg, Lockwood and Carbine side by side rather than relying on marketing claims - worth a read if you're comparing brands for a genuinely harsh coastal install.
Easicode Pro and Security
What's the point of the code change disabling plug?
Once your code is set, the plug physically prevents anyone else from initiating a new code change on the keypad - useful on a shared gate where you don't want a former tenant or contractor able to re-code the lock after their access should have ended. See our ECP change key guide for how the disabling plug interacts with the code change key.
Once your code is set, the plug physically prevents anyone else from initiating a new code change on the keypad - useful on a shared gate where you don't want a former tenant or contractor able to re-code the lock after their access should have ended. See our ECP change key guide for how the disabling plug interacts with the code change key.
What should I check before I lock myself out during a code change?
Always keep the gate propped open and test the new code at least five times before trusting it - our before-you-start checklist and the keep the door open rule are both worth reading before you touch the keypad.
Always keep the gate propped open and test the new code at least five times before trusting it - our before-you-start checklist and the keep the door open rule are both worth reading before you touch the keypad.
Holdback, Passage and Gate Safety
Can I use the holdback function on a pool gate?
Not as a substitute for the gate's self-latching requirement - a pool gate must self-close and self-latch by law. Holdback is fine for temporary, supervised use (e.g. moving furniture through), but the gate must be returned to normal self-latching operation afterward. See our holdback and pool gates ruling for the full explanation, and our pool gate latch treatment guide for the canonical compliance rundown.
Not as a substitute for the gate's self-latching requirement - a pool gate must self-close and self-latch by law. Holdback is fine for temporary, supervised use (e.g. moving furniture through), but the gate must be returned to normal self-latching operation afterward. See our holdback and pool gates ruling for the full explanation, and our pool gate latch treatment guide for the canonical compliance rundown.
Can holdback be engaged on a fire door?
No - never. A fire door must self-latch at all times. This lock carries no fire rating and is not intended for fire door use in any configuration. See our fire door exclusion explainer for the reasoning.
No - never. A fire door must self-latch at all times. This lock carries no fire rating and is not intended for fire door use in any configuration. See our fire door exclusion explainer for the reasoning.
Choosing the Right BL4400 Model
I need code entry from both sides of the gate - which model do I want?
That's the BL4441MGPROECP - the back-to-back sibling to this product, same MG Pro ECP platform but with a keypad and lever on both sides instead of a free inside lever. See our why double-sided locks suit gates guide for when this configuration actually makes sense.
That's the BL4441MGPROECP - the back-to-back sibling to this product, same MG Pro ECP platform but with a keypad and lever on both sides instead of a free inside lever. See our why double-sided locks suit gates guide for when this configuration actually makes sense.
What if I don't need a lever at all - just a simple slam-shut gate latch?
The BL4409MGPROECP is a rim-fixed slam latch on the same MG Pro ECP platform - no inside lever, just a turn-knob, and it self-latches when the gate swings shut. A genuinely different mechanism to this lever/lever product, worth comparing if your gate doesn't need lever-style hardware.
The BL4409MGPROECP is a rim-fixed slam latch on the same MG Pro ECP platform - no inside lever, just a turn-knob, and it self-latches when the gate swings shut. A genuinely different mechanism to this lever/lever product, worth comparing if your gate doesn't need lever-style hardware.
Latch Security
What does "anti-thrust tubular latch" actually mean, and does it matter?
An anti-thrust latch has a shaped bolt with a small internal deadlocking plunger built in. Once the door or gate closes, that plunger stops the bolt being pushed straight back with a knife, card, or similar thin tool worked between the door and frame - a known weakness of plain spring latches, sometimes called "loiding." It doesn't make the latch as strong as a deadbolt, but it closes off the easiest form of manual manipulation, which is genuinely worth having on a gate or external door secured by a keypad alone rather than a second lock. See the dimensioned latch drawings in the body for exactly how the bolt and strike are shaped.
An anti-thrust latch has a shaped bolt with a small internal deadlocking plunger built in. Once the door or gate closes, that plunger stops the bolt being pushed straight back with a knife, card, or similar thin tool worked between the door and frame - a known weakness of plain spring latches, sometimes called "loiding." It doesn't make the latch as strong as a deadbolt, but it closes off the easiest form of manual manipulation, which is genuinely worth having on a gate or external door secured by a keypad alone rather than a second lock. See the dimensioned latch drawings in the body for exactly how the bolt and strike are shaped.
Related Products, Guides and Chapters
Direct siblings: BL4401MGPRO (non-ECP, on the bench code change) · BL4441MGPROECP (back-to-back)
Alternative mechanism: BL4409MGPROECP (rim-fixed slam latch)
Spares: Spare Keypad Lever, ECP + MG Pro (finish and method matched) · Spare Keypad Lever, non-ECP · 28mm Latch, Left Hand · 28mm Latch, Right Hand
Categories: Digital Mechanical Locks · External Gate Exposed to Rain
Buyer's Guide chapters: Ch 16 Gate Keypad Locks · Ch 16 Code Changing · Ch 16 Borg Naming Decoded
Helpful blog reading: Gate Post Too Narrow for a 60mm Latch? · Why Double-Sided Locks Suit Gates · Why Magnetic Gate Latches Can Be Problematic · Latch vs Bolt Mechanical Digital Locks · MG Pro & ECP Explained · Changing Codes on Mechanical Digital Locks · Lockwood vs Borg vs Carbine
What's In The Box - Borg BL4401MGPROECP
- Borg BL4401 MG Pro ECP digital keypad unit (external lever, MG Pro coating)
- Inside lever handle assembly (MG Pro coating)
- 60mm backset anti-thrust stainless steel tubular latch
- Strike plate
- 8mm flat bladed sprung spindle
- M4 stainless steel fixing screws (suits doors up to 85mm thick)
- Easicode Pro code change key
- Optional code change disabling plug
Borg BL4401 MG Pro - Real Installations
Installed by Terry's - Surfers Paradise QLD
Installed by Terry's - Broadbeach QLD
Installed by Terry's - Mermaid Waters QLD
Installed by Terry's - Burleigh Heads QLD
Installed by Terry's - Robina QLD
Installed by Terry's - Varsity Lakes QLD
Installed by Terry's - Mudgeeraba QLD
Installed by Terry's - Southport QLD
Installed by Terry's - Labrador QLD
Installed by Terry's - Biggera Waters QLD
Installed by Terry's - Helensvale QLD
Installed by Terry's - Coomera QLD
Installed by Terry's - Palm Beach QLD
Installed by Terry's - Coolangatta QLD
Installed by Terry's - Miami QLD
Installed by Terry's - Mermaid Beach QLD
Installed by Terry's - Clear Island Waters QLD
Installed by Terry's - Ashmore QLD
Installed by Terry's - Nerang QLD
Installed by Terry's - Benowa QLD
Installed by Terry's - Runaway Bay QLD
Installed by Terry's - Paradise Point QLD
Installed by Terry's - Hope Island QLD
Installed by Terry's - Arundel QLD
Installed by Terry's - Molendinar QLD
Installed by Terry's - Parkwood QLD
Installed by Terry's - Highland Park QLD
Installed by Terry's - Worongary QLD
Installed by Terry's - Elanora QLD
Installed by Terry's - Reedy Creek QLD
Installed by Terry's - Carrara QLD
Installed by Terry's - Merrimac QLD
Installed by Terry's - Oxenford QLD
Installed by Terry's - Pacific Pines QLD
Installed by Terry's - Pimpama QLD
Installed by Terry's - Ormeau QLD
Installed by Terry's - Coombabah QLD
Installed by Terry's - Bilinga QLD
Installed by Terry's - Tugun QLD
Installed by Terry's - Currumbin QLD
Installed by Terry's - Bonogin QLD
Installed by Terry's - Tallebudgera QLD
Installed by Terry's - Upper Coomera QLD
Installed by Terry's - Clagiraba QLD
Installed by Terry's - Wongawallan QLD
Installed by Terry's - Ormeau Hills QLD
Installed by Terry's - Bahrs Scrub QLD
Installed by Terry's - Stapylton QLD
Installed by Terry's - Yatala QLD
Installed by Terry's - Mount Nathan QLD
Installed by Terry's - Norwell QLD
Installed by Terry's - Willowvale QLD
Installed by Terry's - Jacobs Well QLD
Installed by Terry's - Steiglitz QLD
Installed by Terry's - Woongoolba QLD
Installed by Terry's - Kingsholme QLD
Installed by Terry's - Luscombe QLD
Installed by Terry's - Guanaba QLD
Installed by Terry's - Tamborine QLD
Installed by Terry's - Beechmont QLD
Installed by Terry's - Witheren QLD
Installed by Terry's - Mount Tamborine QLD
Installed by Terry's - Canungra QLD
Installed by Terry's - Advancetown QLD
Installed by Terry's - Austinville QLD
Installed by Terry's - Mudgeeraba QLD
Installed by Terry's - Springbrook QLD
Installed by Terry's - Natural Bridge QLD
Installed by Terry's - Currumbin Valley QLD
Installed by Terry's - Numinbah Valley QLD
Installed by Terry's - Bilambil QLD
Installed by Terry's - Tweed Heads QLD
Installed by Terry's - Banora Point QLD
Installed by Terry's - Surfers Paradise QLD
Installed by Terry's - Broadbeach QLD
Borg BL4400 Series - Dimensions
External keypad - 142mm H × 41mm W × 21mm D • 75mm base
Inside handle and 60mm tubular latch dimensions
60mm anti-thrust tubular latch - isometric dimensional drawing
60mm anti-thrust tubular latch - plan and elevation dimensions
Borg BL4400 ECP Series - Product Brochure
BL4400 ECP Series - features, specifications, dimensions and MG Pro coating information
PDF Files - BL4401MGPROECP
Borg BL4400 ECP Series Product Brochure (PDF)
Single-model specification sheet covering the BL4401 ECP - features, MG Pro finish, dimensions and code change instructions.
Single-model specification sheet covering the BL4401 ECP - features, MG Pro finish, dimensions and code change instructions.
Borg BL4000 ECP Series Code Change Instructions (PDF)
On-door Easicode Pro code change procedure - the document header says BL2000 but the same method applies to the BL4000 series.
On-door Easicode Pro code change procedure - the document header says BL2000 but the same method applies to the BL4000 series.
Borg BL4400 Series Brochure (PDF)
Whole-series overview covering BL4401 (tubular latch), BL4402 (Ali-Latch), BL4440 (back to back) and BL4409 (rim fixed slam latch) - useful for comparing this product against its siblings.
Whole-series overview covering BL4401 (tubular latch), BL4402 (Ali-Latch), BL4440 (back to back) and BL4409 (rim fixed slam latch) - useful for comparing this product against its siblings.
Borg Lock Servicing Guide (PDF)
General maintenance guidance for Borg mechanical pushbutton keypad locks.
General maintenance guidance for Borg mechanical pushbutton keypad locks.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
