Borg Mechanical Digital BL5401SSDDAECP – DDA Compliant Lever – Satin Stainless – Easicode Pro
The Borg BL5401 SS DDA ECP is a medium to heavy duty fully mechanical digital lock in satin stainless finish, with Easicode Pro on-door code change and a DDA compliant AS1428.1-2009 flat bar lever. The flat bar lever design requires less grip force and is specified for disability access doors, accessible toilet facilities, and BCA-compliant commercial and institutional applications.
Fire rated to AS 1905.1-2005 (up to 4 hours depending on doorset), cycle tested to 100,000+ operations, and accepts doors from 35mm to 80mm thick. Fully mechanical – no batteries. Suitable for internal and sheltered external installations. Not suitable for coastal or saline environments – for marine grade construction see the BL5401DDAMGPROECP.
Usually same day if ordered before 11am AEST (excluding weekends and Qld public holidays)
Successfully tested up to 4 hours (depending on doorset) on fire door assemblies in accordance with AS 1905.1-2005 Fire Resistant Doorsets.
Flat bar lever compliant with BCA AS1428.1-2009. Requires minimal grip force. Suitable for disability access doors, accessible toilet facilities, and BCA-compliant applications. Lever compliance relates to the handle design only and does not imply full building access compliance.
This satin stainless finish is designed for internal and sheltered external use in normal weather conditions. For coastal, beachside, or marine environments, see the BL5401DDAMGPROECP (Marine Grade Pro, 316 SS, 1,000hr salt spray tested).
The PIN code can be changed while the lock is installed using the included code change key. Insert the key over the Φ button, rotate 90° clockwise, hold, press C to clear, enter new digits, confirm, then release. No lock removal required.
Enter code, rotate lever, press F to engage free passage mode. To exit: rotate lever and press C. Permanently deactivatable with the included plug.
Entirely mechanical. No power source, no wiring, and no battery maintenance at any point.
For maximum heavy duty: consider the Lockwood DX, Borg 7701, or Carbine CDL7000 Series.
Accepts one active PIN code at a time.
Key Features
- DDA compliant flat bar lever – AS1428.1-2009; suitable for disability access, accessible toilet, and BCA-compliant applications.
- Easicode Pro (ECP) on-door code change – no lock removal required.
- Fire rated to AS 1905.1-2005 (up to 4 hours depending on doorset).
- Fully mechanical – no batteries, no wiring, no power source.
- Over 1,000 non-sequential code combinations.
- Satin stainless finish – suitable for internal and sheltered external use.
- Clutching external lever – free-turning until correct code entered; inside DDA lever always free.
- Optional free passage function (F button) – permanently deactivatable.
- 60mm anti-thrust stainless steel tubular latch; 12mm bolt projection.
- 8mm square drive spindle – compatible with most leading lock brands.
- Door thickness 35mm to 80mm.
- Cycle tested to 100,000+ operations.
- Reversible on site for left or right hand doors.
What's in the Box
- Borg BL5401 SS DDA ECP outside keypad and DDA flat bar lever assembly (satin stainless)
- Inside DDA flat bar lever handle assembly (satin stainless)
- 60mm anti-thrust stainless steel tubular latch (12mm bolt projection)
- Strike plate and box keep
- 2 × spindles (80mm and 90mm)
- M4 stainless steel fixing screws (40mm, 50mm, 60mm options)
- 4 × 16mm screws
- Easicode Pro code change key
- Code change deactivation plug (optional)
- Free passage deactivation plug (optional)
- Hex wrench (Allen key)
- Handle screw rubber grommet
Suitable Uses
- Disability access doors, accessible toilet facilities, and amenity rooms requiring BCA AS1428.1 compliant lever hardware
- Commercial, strata, institutional, and healthcare buildings with internal or sheltered external disability access requirements
- Fire-rated door assemblies requiring AS1428.1 compliant lever hardware
- Office and amenities doors requiring medium to heavy duty access control with on-door code management
- Applications where ECP on-door code change and DDA lever compliance are both required without the need for marine grade construction
Borg BL5401 DDA Series – Product Family
All BL5401 DDA models use the AS1428.1-2009 compliant flat bar DDA lever. All are fully mechanical with no batteries. All full-lock models are fire rated to AS 1905.1-2005 (up to 4 hours depending on doorset).
ECP = Easicode Pro on-door code change. MG Pro = Marine Grade Pro – 316 SS internals – 1,000hr salt spray tested. Keypad-only models require a compatible latch and inside handle sourced separately.
Full Specifications
Dimensions
Frequently Asked Questions
What is the DDA lever and what makes it different from a standard lever?
The BL5401 uses a flat bar lever compliant with BCA AS1428.1-2009 (Design for Access and Mobility). This lever requires significantly less grip force and torque than a round bar lever, making it suitable for users with limited hand strength or dexterity. It is the correct lever type for disability access doors, accessible toilet facilities, and any application where BCA accessibility compliance is required for the locking hardware. Lever compliance relates to the handle design only and does not imply full building access compliance for the installation.
How do I change the PIN code on the ECP model?
With the door open, enter the current code. Insert the code change key over the Φ button, rotate it 90° clockwise, then press and hold fully. Press C to clear, enter the new code digits, press all digits again to confirm, then release and remove the key. Press C or rotate the lever to finalise. Test at least 5 times before closing the door. The code is non-sequential — if set to 1234, entering 4321 or any order will open the lock.
How does the free passage function work?
Enter the correct code, rotate the lever, then press F while the lever is still rotating. The lever becomes free-turning. To exit free passage: rotate the lever and press C until an audible click is heard. The free passage function can be permanently deactivated by inserting the supplied plug behind the F button slot on the back of the keypad before installation.
Can I reverse the handing on site?
Yes. All BL5401 units are factory set for right-hand doors. To change: remove the rubber grommet at the base of the keypad handle, use the included hex wrench to remove the grub screw, rotate the handle 180° and refit. Repeat for the inside handle. Handing is determined from the outside of the door: right hand = hinges on the right; left hand = hinges on the left, regardless of swing direction.
Is the BL5401 compatible with third-party lock cases?
Yes. The BL5401 uses an 8mm square drive spindle which is compatible with most leading brands of tubular latch and mortice lock case. Always confirm spindle compatibility with the lock case manufacturer before specifying in a multi-brand installation.
Additional Information
The DDA flat bar lever meets the design requirements of AS1428.1-2009 for locking hardware in accessible environments. Full building compliance requires confirmation with a building certifier or access consultant.
When specifying for fire door use, confirm all other hardware in the assembly is fire-rated and compatible with the doorset certification.
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled — doing so will invalidate the warranty.
What's In The Box – Borg BL5401SSDDAECP
- Borg BL5401 SS DDA ECP outside keypad and DDA flat bar lever assembly (satin stainless)
- Inside DDA flat bar lever handle assembly (satin stainless)
- 60mm anti-thrust stainless steel tubular latch (12mm bolt projection)
- Strike plate and box keep
- 2 × spindles (80mm and 90mm)
- M4 stainless steel fixing screws (40mm, 50mm, 60mm options)
- 4 × 16mm screws
- Easicode Pro code change key
- Code change deactivation plug (optional)
- Free passage deactivation plug (optional)
- Hex wrench (Allen key)
- Handle screw rubber grommet
Borg BL5401 DDA Series – Real Installations
Borg BL5400 Series – Dimensions
Borg BL5000 Series – Product Brochure
Borg Locks Warranty – Australia
What is Covered
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What is Not Covered
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled — dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How a Warranty Claim Works
Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor for Borg Locks. If the returned item is found by LSC to be defective, it will be repaired or replaced. Products must be returned to the LSC office with freight charges prepaid within the warranty period. A detailed assessment report is provided to the customer after examination.
Contact Terry’s Locksmiths first — we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside — and does not limit — these statutory rights.
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
