Carbine CEL2-3IN1 Digital Leverset with RFID and Key Override – Satin Nickel Kit with Batteries
The Carbine CEL2-3IN1-SL8SNKIT is the standalone leverset in the CEL2-3IN1 range, providing three access methods: touchscreen PIN code, RFID/NFC credential, and mechanical key override. It stores up to 100 combined user codes and RFID credentials in a shared pool with no hub, gateway, or internet connection required.
The CEL2-3IN1 leverset is the second generation of the original CEL-3IN1, featuring a new lower-profile escutcheon and improved touchscreen and motor. Credential capacity has increased from 25 PIN codes + 25 RFID cards to 100 combined. The leverset is designed to IP54 standards and is NCC compliant. It is fire rated for use on Firecore fire-rated door assemblies. For installations requiring a dedicated fire door hardware kit, see the CEL2-3IN1-SL8SN-FRKIT. See: Buyers Guide Ch05: Fire Door Smart Locks.
If Bluetooth app management is also required, see the CEL2-BT-SL8SNKIT (PIN + RFID + Bluetooth + Key, 200 combined codes). A Matte Black variant (CEL2-3IN1-SL8MBKIT) is also available.
The CEL2-3IN1 leverset is certified for use on Firecore fire-rated door assemblies. Certification: FRT230184 DHAR2.0 (Warringtonfire) — Firecore TVC30 (37mm door) FRL -/60/30; Firecore TVC40 (47–48mm door) FRL up to -/120/30; valid to 20/12/2028. For the dedicated fire door installation kit, see the CEL2-3IN1-SL8SN-FRKIT. See: Fire door types and smart lock certification · Fire rating certificates
Usually same day if ordered before 11am AEST (excluding weekends and Qld public holidays)
Available Finish Options
Satin Nickel
This Product – CEL2-3IN1-SL8SNKIT
Matte Black
CEL2-3IN1-SL8MBKIT
Finish does not affect function, compliance, or performance.
Key Features
- Three access methods: touchscreen PIN code, RFID/NFC credential, and mechanical key override.
- Stores up to 100 combined user codes and RFID credentials (shared pool) — up from 25+25 on the original CEL-3IN1.
- Compatible with Mifare 13.56MHz RFID cards, FOBs, wristbands, stickers, and NFC-enabled smartphones.
- New lower-profile escutcheon with improved touchscreen and motor function — CEL2 generation.
- Standalone operation — no app, gateway, hub, or internet required.
- Guiding code, double authorisation, vacation mode, passage mode, auto-lock 5–99 seconds.
- Single-use PIN codes supported for one-time access.
- Fire rated on Firecore door assemblies (FRT230184 DHAR2.0, Warringtonfire — TVC30 -/60/30; TVC40 up to -/120/30).
- NCC compliant SL8 lever. IP54 rated. ANSI Grade 2.
- Fits standard 54mm lockset hole; door 35–51mm; backset 60–70mm adjustable.
Access Methods
Works on 13.56MHz Mifare NFC (ISO14443 Type A) — RFID cards, FOBs, wristbands, stickers, and most NFC-enabled Android phones. Australian Mifare transit cards (Go card, Opal, Myki, SmartRider, MyWay, metroCard) are compatible. Visa PayWave and Mastercard PayPass are NOT compatible (ISO14443 Type B). If your phone’s NFC chip is incompatible, a Mifare RFID sticker on the back of the phone is the recommended workaround. See: Carbine CEL RFID Application List (PDF) · Buyers Guide Ch03: Access Methods
Suitable Uses
- Residential entry and front doors requiring keyless access via PIN or RFID card, without needing app management. A simpler, more reliable solution where Bluetooth is unnecessary.
- Short-stay rental properties using RFID card handover for guests and cleaners. See: Airbnb smart locks — do you need WiFi?
- Strata and apartment entry doors requiring NCC lever compliance. See: Buyers Guide Ch04: Door Types
- Firecore fire-rated door assemblies (TVC30 and TVC40). For the dedicated fire door kit, see the CEL2-3IN1-SL8SN-FRKIT. See: Buyers Guide Ch05: Fire Door Smart Locks
- Applications requiring passage mode for free-flow access periods. See: Buyers Guide Ch04: Door Types
- Upgrades from the original CEL-3IN1 leverset where higher credential capacity (100 vs 25+25) is needed.
See also: Buyers Guide Ch02: Measuring Your Door · Check clearance between door and security screen · Understanding door handing in Australia
What’s in the Box
- 1 × exterior electronic module with touchscreen keypad
- 1 × interior lever handle assembly
- 1 × tubular latch (60–70mm adjustable backset)
- 1 × C4 keyway cylinder (6-pin, keyed to 5-pin key)
- 2 × mechanical keys
- 2 × RFID key cards
- 1 × user manual and installation guide
- 1 × set of fixing screws
- 4 × AA alkaline batteries (Duracell Procell)
Carbine CEL / CEL2 / CDL2 – Complete Product Family
CEL2-BT deadbolt: RFID not available — Bluetooth and PIN only. CDL2: membrane keypad, no RFID. All KIT numbers include batteries.
Accessories & Retrofit Plates
Full Specifications
Key Dimensions
Battery, Power & Backup Access
- Powered by 4 × AA alkaline batteries (Duracell Procell recommended). Do not use lithium or rechargeable batteries.
- Battery life approx. 5,000 openings. Low battery warning via LED and audible tone before depletion.
- Mechanical key override provides physical backup entry at all times regardless of battery state.
- This KIT version includes batteries. See: How long do digital door locks last?
Frequently Asked Questions
What is the difference between this and the CEL2-BT-SL8SNKIT?
The CEL2-BT-SL8SNKIT adds Bluetooth via the Carbine Connect App and increases capacity to 200 combined codes and 10 Bluetooth users. This model (CEL2-3IN1-SL8SNKIT) is the standalone version — no app or Bluetooth, simpler setup, same physical format. Choose the BT variant if you need app-based user management or scheduled access; choose this if PIN and RFID are sufficient. See: Buyers Guide Ch03: Access Methods
Does this leverset work on fire doors?
Yes. The CEL2-3IN1 leverset is certified on Firecore door assemblies — Firecore TVC30 (FRL -/60/30) and Firecore TVC40 (FRL up to -/120/30). For the dedicated fire door installation kit, see the CEL2-3IN1-SL8SN-FRKIT. See: Apartment fire doors on the Gold Coast
Will my NFC phone work as an RFID credential?
Most NFC-enabled Android phones with Mifare support work. Verify your phone’s NFC chip compatibility before installation. Visa PayWave and Mastercard PayPass are not compatible. If incompatible, use a Mifare RFID sticker adhered to the back of your phone. See: Carbine CEL RFID Application List (PDF)
What is passage mode and how do I use it?
Passage mode keeps the latch retracted so the door swings freely without a code. To activate: enter a valid code, then immediately hold [#] for 1 second. To deactivate: wake the screen and hold [#] again. Useful for open hours or busy entry periods. See: Buyers Guide Ch04: Door Types
My door is not within 35–51mm or 60–70mm backset — will this fit?
No — outside these ranges this lock is not compatible. See: Buyers Guide Ch02: Measuring Your Door · How to measure your backset
Additional Information
The connecting cable between the exterior and interior modules must be seated correctly in the designated channel of the mounting plate. Incorrect routing is the most common installation error — a pinched cable causes an unresponsive keypad, a battery cover that won’t close, or the Set button being held down permanently. If the keypad stops responding after the battery cover is installed, check cable routing first. See: 3 common DIY smart lock installation mistakes
The factory default programming code is 12345678. It can both unlock the door and access programming mode. Change it to a private code immediately after installation. Issue separate user codes or RFID cards for day-to-day access; never share the programming code with tenants or users. See: The realities of electronic door locks
The CEL2-3IN1 uses a new lower-profile escutcheon. Screw hole positions differ from the original CEL-3IN1, so existing fixing holes may not align. CEL2 retrofit plates (CEL2-L-RP-SS or CEL2-L-RP-MB, 88×195mm) are available to cover old screw holes on both faces of the door. Confirm fitment with the retrofit plate spec sheet before ordering.
Confirm all hardware in the fire door assembly — including hinges, closers, seals, and strike — is compatible and rated. The CEL2-3IN1-SL8SN-FRKIT is the dedicated fire door kit; the standard SL8SNKIT is also certified but the FR kit includes specific hardware for fire door compliance. Always verify current certification status before specifying. See: Fire door types and smart lock certification · Asbestos in Gold Coast apartment fire doors
Terry’s Locksmiths offers supply and installation on the Gold Coast. See: Site survey and installation services. For self-installation: Buyers Guide Ch12: Installation & Troubleshooting
- 12-month warranty from date of purchase against defects in materials and workmanship.
- Does not cover misuse, vandalism, improper installation, or damage from incompatible batteries.
- Do not dismantle the lock — unauthorised disassembly voids warranty.
- Terry’s Locksmiths manages warranty claims for products purchased through this store. Contact Terry’s in the first instance.
- Operates alongside rights available under the Australian Consumer Law.
Full Davcor warranty: davcor.com.au/warranty
What’s in the Box – CEL2-3IN1-SL8SNKIT
Carbine CEL2-3IN1 – Product Brochure
Davcor Group – Warranty Against Defects
Davcor Group Pty Ltd (ABN 95 003 562 598) guarantees its products to be free from defects in materials and workmanship from the date of original purchase for the period applicable to the product and brand, as set out in Appendix A of the Davcor Warranty Against Defects. This warranty is for replacement of product only.
Carbine brand products carry a 1 year warranty from date of original purchase (refer to product installation documentation and davcor.com.au/warranty for the period applicable to other Davcor brands).
Brands Covered by the Davcor Warranty
Warranty Exclusions
- Fair wear and tear
- Damage due to faulty installation, misuse, or modification of the product
- Tarnishing or finish damage, including colour change due to weather, salt, or chemical exposure
- Batteries
- Re-installation, travel, or other ancillary costs related to a defective product
- Specially made-to-order products (non-returnable); no credit is given on software, master keys, or manuals
How to Make a Warranty Claim
Claims must be submitted in writing to the place of purchase and include:
- A description of the defect
- Date of supply and proof of purchase
- Your contact details
A return authorisation number must be obtained from Davcor before returning any product. Products can only be returned in their original, complete, and saleable packaging. Davcor must test and confirm the product is defective before any claim is valid.
Direct Davcor contact:
Davcor Group Pty Ltd — 14 John Hines Avenue, Minchinbury NSW 2770
Phone: +61 2 9612 4747 —
Email: warranty@davcor.com.au
Contact us first — we’ll manage your warranty claim with Davcor on your behalf. Call (07) 5601 1867 or submit an enquiry →
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. The Davcor express warranty operates alongside and in addition to your rights under the Australian Consumer Law. Full warranty terms and conditions: davcor.com.au/warranty
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
