Borg BLS272000RH Narrow-Stile Mortice Latch - 28mm Backset - Right Hand - Satin Chrome
The Borg BLS272000RH is the 28mm narrow-stile mortice latch for the Borg 2000 and 4000 Series mechanical digital locks, in right hand. It is a narrow-stile mortice latch with a 28mm backset, made for aluminium shopfront doors where a full 60mm latch will not fit the stile.
This latch is supplied right hand. It is sold handed, so check which way your door opens and order the hand that matches it - for a left-hand door, order the left-hand version. If the wrong hand does turn up on site, a locksmith or a competent handy person can change the hand on the bench.
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- Narrow-stile mortice latch for Borg 2000 and 4000 Series digital locks.
- 28mm backset for aluminium shopfront and narrow-stile doors.
- Supplied right hand - a handed latch, so order the hand that matches your door.
- The hand can be changed on the bench with basic hand tools - Borg's handing guide takes six steps.
- Flat bar spindle interface, driven by a tail piece - not the 8mm square drive of the 5000 Series 28mm latch.
- Satin chrome finish; supplied as a latch only.
What's in the Box
- 1 x Borg 28mm narrow-stile mortice latch, right hand (satin chrome)
Suitable Uses
Use this latch on aluminium shopfront doors and other narrow-frame doors fitted with a Borg 2000 or 4000 Series digital lock, where the stile is too narrow for a standard tubular latch. It is one of our tubular and mortice latches for digital locks.
Available Finish Options
Satin Chrome
(This Product)
STK BLS272000RH
Finish selection does not affect functionality, compliance, or performance.
Item Code Family - Borg Digital Lock Latches
This product is the bold row. For a Borg 5000 Series lock, the 28mm latch is the BLS275000LH / BLS275000RH - it looks the same but runs on a different drive.
Which 28mm Latch - 2000 Series or 5000 Series?
We stock two 28mm short-backset latches and they look almost identical in a photograph - same 28mm backset, same slim face plate, same satin chrome. The difference is the drive, and it is on the back of the latch where the spindle passes through. This one, for the 2000 and 4000 Series, is driven by a tail piece. The 5000 Series latch takes an 8mm square spindle. Work out which lock you have before you order.
Suits Borg 2000 and 4000 Series
Tail-piece drive (this product)
Left-hand latch shown - the drive is the same on both hands
Compatibility - What This Fits
This 28mm latch fits the Borg 2000 and 4000 Series knob and lever locks below. On the three locks built for narrow stiles it is the matching spare; on the others it replaces the 60mm latch supplied with the lock where a narrow aluminium gate frame or stile will not take a 60mm backset. It is the narrow-stile alternative to the standard 60mm latch. For a left-hand door, order the left-hand version.
Fitting to an aluminium stile? The BDS faceplate conversion adapts a 28mm aluminium latch faceplate to the 3582 pattern. See the narrow-frame door category and gate post too narrow for a 60mm latch for narrow-stile guidance.
Full Specifications
Frequently Asked Questions
This is the right-hand latch, and it is sold handed, so order the hand that matches your door - the left-hand version is a separate listing. Check which way the door opens before ordering; our guide to door handing in Australia explains left and right hand. If the wrong hand does turn up on site, it is not a wasted latch - a locksmith or a competent handy person can change the hand on the bench, following Borg's handing guide.
28mm is the narrow-stile backset for aluminium shopfront doors, where a full 60mm latch will not fit the stile. For standard timber doors use the 60mm latch.
The Borg 2000 and 4000 Series knob and lever locks in the compatibility table - the 28mm models BL2002SC, BL2202SC and BL2702SCECP, and the 60mm locks that take this latch on a narrow aluminium gate frame.
No. Both are 28mm latches and they look alike, but this one is driven by a tail piece and the 5000 Series latch takes an 8mm square spindle. The two drives side by side shows the difference; for a 5000 Series lock, order the BLS275000LH / BLS275000RH.
Additional Information
Warranty
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Download PDF Resources
Borg's one-page guide to changing the hand of its aluminium door latch, with a photograph of each of the six steps - the four screws out, the back plate prised off, the two coil springs, latch bolt and anti-thrust pin removed, the pin driven out of the latch bolt, the latch tail piece flipped, and the latch reassembled.
Borg's installation and code change manual for the 2000 Series knob keypad locks this latch suits - parts list, handing, door preparation and fitting. Its latch steps are written for the standard tubular latch.
Borg's one-page Light Duty 2000 Series leaflet - it lists the 28mm narrow-stile ali-latch beside the standard 60mm tubular latch and the 50mm and 70mm options.
Borg's one-page 4400 Series brochure for the 4000 Series gate locks - it lists the 4400 Series models supplied with a 28mm backset narrow-stile latch.
Borg's one-page maintenance guide for its mechanical digital locks - a monthly clean with a light silicone-based lubricant, and a yearly service with the lock off the door that takes in the latch and fixings.
PDF Files - BLS272000RH
Borg's one-page guide to changing the hand of its aluminium door latch, with a photograph of each of the six steps - the four screws out, the back plate prised off, the two coil springs, latch bolt and anti-thrust pin removed, the pin driven out of the latch bolt, the latch tail piece flipped, and the latch reassembled.
Borg's installation and code change manual for the 2000 Series knob keypad locks this latch suits - parts list, handing, door preparation and fitting. Its latch steps are written for the standard tubular latch.
Borg's one-page Light Duty 2000 Series leaflet - it lists the 28mm narrow-stile ali-latch beside the standard 60mm tubular latch and the 50mm and 70mm options.
Borg's one-page 4400 Series brochure for the 4000 Series gate locks - it lists the 4400 Series models supplied with a 28mm backset narrow-stile latch.
Borg's one-page maintenance guide for its mechanical digital locks - a monthly clean with a light silicone-based lubricant, and a yearly service with the lock off the door that takes in the latch and fixings.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
1 Review Hide Reviews Show Reviews
-
Exact replacement part
Great service
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
