BORG Mech-Digital BL2000KPB Knob *Keypad Only* Polished Brass

Borg BL2000KPB Knob Keypad Only - Polished Brass

At A Glance

At A Glance

DISPATCHSame Day Before 11am

SPARE PARTKeypad Only

FINISHPolished Brass

IN THE BOXKeypad and Fixings Pack

WARRANTY12 Months

FITSBorg 2000 Series Knob Locks

CODE CHANGEOn The Bench - Fiddly

CONVERTSLockwood 3572, 3582 and 002

POWERNo Batteries

COMBINATIONSOver 8,000

HANDINGNon-Handed

CYCLE TESTED50,000 Operations

RANGESee Lever, ECP and External

NOT HIGH TRAFFICLight Duty Series

UNLOCK WITH

PIN Code Key Override
Not Available

The Borg BL2000KPB Knob Keypad Only is the outside knob keypad from Borg's BL2000 polished brass lock, sold on its own as a replacement keypad only. It suits Borg 2000 series knob locks - the BL2000PB it matches and the other models under Compatible Borg Locks and Lockwood Conversions - and, like the satin chrome version, it takes Borg's Lockwood conversion kits.

Like every lock in our mechanical digital range, it needs no batteries, wiring or app. It belongs to Borg's light duty 2000 series, with over 8,000 code combinations, and the code is changed On The Bench - the lock comes off the door for it (how the Borg bench change works).

Estimated Dispatch
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).

Replacement Keypad Only - Not a Complete Lock
This listing is the outside knob keypad only. A working lock also needs the inside handle, latch, strike plate and spindle, which come with the complete Borg BL2000PB lock - order that instead if there is no Borg lock on the door yet. Converting a Lockwood lock instead? The keypad pairs with a Borg conversion kit, and no kit includes a keypad - see the conversions.

On The Bench Code Change - a Fiddly Job
To change the code, the lock comes off the door, the plate inside the keypad is unscrewed and the coded and un-coded pieces are moved with tweezers while C is held in. It works, but it is fiddly, and Borg says to test the new code three or four times before the lock goes back on. The code is not sequential, so the coded buttons can be pressed in any order, and spare coded pieces let you set a longer or shorter code. If you expect to change the code even once a year, an Easicode Pro keypad that changes on the door is the better buy - the bench method step by step, where bench changes go wrong and do you always need ECP?.

Fully Mechanical - No Batteries
The keypad works entirely mechanically: no batteries, no wiring and no app, so there is nothing to go flat. How a mechanical digital lock works.

Designed for light to medium usage areas
Borg makes the 2000 series as its light duty range - offices, storerooms, staff rooms and home internal doors.

Not suitable for high-traffic commercial use
For heavy duty, consider the Lockwood 3572DX, Borg BL7701 or Carbine CDL7200LL - and read what heavy duty actually means.

Access Methods

Method	Available	Notes
PIN Code	Yes	One code at a time, set On The Bench; over 8,000 combinations; coded buttons pressed in any order
Key Override	Not Available	This keypad has no key cylinder - it opens by PIN code only

New to mechanical keypads? See how the codes actually work.

Key Features

• Knob keypad only - the polished brass outside unit of Borg's 2000 series, for a compatible Borg lock already on the door or a Borg Lockwood conversion kit.
• Fully mechanical - no batteries, no wiring and no app.
• Locks automatically and stays locked until the correct code is entered.
• Over 8,000 code combinations; the code is not sequential, so the coded buttons can be pressed in any order.
• Borg's patented load plate, designed to stop the code being cracked.
• Early clear - press C before you enter the code.
• Cycle tested to 50,000 operations (Borg 2000 series).
• Non-handed - reversible on site (how to check handing).
• On The Bench code change, with spare coded pieces for a longer or shorter code (about the spare pieces).
• Polished brass finish - the same knob keypad is sold in satin chrome as the BL2000KSCNEW.

What's In The Box

Not included
Inside handle, latch, strike plate and spindle - these come with the complete Borg BL2000PB lock. The Lockwood conversion kits, spare rubber gaskets and the BL2000KIT accessories packet are sold separately.

Suitable Uses

• Replacing a worn or damaged outside keypad on the polished brass BL2000PB or a brass BL2200 - the inside handle, latch and strike stay on the door.
• Converting a Lockwood 3572 or 3582 mortice lock or a 002 deadlatch to code entry with the matching Borg kit - the retrofit ecosystem explained.
• Internal doors where polished brass suits the hardware - homes, offices and hospitality fit-outs that suit a light duty lock (where mechanical digital locks are used).
• Exposed door or gate? The external grade BL2600KMG knob keypad is made for it, and a Marine Grade Pro keypad for salt air (environment grades explained).

Available Finish Options

• 
  Polished Brass
  (This Product)
  STK BL2000KPB
• 
  Satin Chrome
  STK BL2000KSCNEW

Finish selection does not affect functionality, compliance, or performance. The same 2000 series knob keypad is sold on its own in satin chrome.

Compatible Borg Locks and Lockwood Conversions

The BL2000KPB is the polished brass outside keypad for Borg's 2000 series knob locks, and it takes the same Lockwood conversion kits as the satin chrome keypad. The other 2000 series knob locks we stock are satin chrome - the BL2000KSCNEW is their match. Check the model on the lock you have, and ask us if you are not sure.

Borg 2000 Family Keypad-Only Range

The Easicode Pro keypads change the code on the door with a key; ask us before swapping one onto a lock built for an On The Bench keypad. The code change methods compared.

Accessories and Spares

The accessories packet and the spare coded pieces are the two spares worth having on hand for an On The Bench keypad.

More plates and kits: scar and adaptor plates.

Full Specifications

Keypad Dimensions

Borg's drawing of the 2000 series outside knob keypad. The keypad body is 142mm high and 41mm wide and stands 21mm off the door; the 44mm knob takes the overall projection to 36mm. Fitting a lock to a new door? Check the door thickness and backset first.

Frequently Asked Questions

Will this keypad fit my Borg lock?
It is the polished brass outside knob keypad of Borg's 2000 series. It matches the BL2000PB and suits a brass BL2200. It also fits the satin chrome 2000 series knob locks, but the finish will not match - the BL2000KSCNEW is their keypad. Check the model on your lock and ask us if in doubt - the full list is in the compatibility table.

How do I change the code?
On The Bench. Take the lock off the door (two screws at the top and bottom of the inside handle), remove the red screws and the plate over the code chamber, then hold C in and move the coded (red) and un-coded (blue) pieces with tweezers - never remove the C piece, and keep the square cut-outs facing out. Refit the plate and test the new code three or four times before the lock goes back on. Step by step: the Borg bench change, the Borg BL2000 Series Instruction Manual (PDF) and the Borg code change sheet (PDF).

Should I choose this or an Easicode Pro keypad?
Choose Easicode Pro if you will change the code with any regularity - even once a year. The On The Bench change on this keypad means taking the lock off the door and moving small pieces by hand. Borg's 2000 Easicode Pro knob keypad is the BL2201KSCECP; ask us whether it suits your lock before swapping. See do you always need ECP? and the code change methods compared.

Can I use it to convert a Lockwood lock?
Yes - that is what Borg's conversion kits are for. The BL3572KIT suits a Lockwood 3572 mortice lock, the BL3582KIT a 3582 and the BL002KIT a 002 deadlatch, with back-to-back kits for a keypad on each side. None of the kits includes a keypad, so you need this one as well. Read how the retrofit kits work and ask us to check your lock first.

Can I use it on an outside door or gate?
Borg makes the 2000 series as a light duty range, and this satin chrome keypad is not an external grade product. For a door or gate in the weather, the external grade BL2600KMG knob keypad is the one to look at, and a Marine Grade Pro keypad near the coast (where MG Pro is worth it).

How big is the keypad?
The keypad body is 142mm high and 41mm wide and stands 21mm off the door; the 44mm knob takes it to 36mm overall. Borg's drawing is under Keypad Dimensions.

Additional Information

• Keypad only, by design: replacing just the outside unit keeps the inside handle, latch and strike already on the door - the approach we explain in why spare parts matter. Starting from scratch? Buy the complete BL2000PB.
• Keep spare pieces for the bench: a coded or un-coded piece that goes missing mid-change stops the job - BLS213 and BLS214 are the spares.
• Test before you rely on it: after any code change, keep the door open and try the new code several times before you close it.
• Service it on a schedule: the Borg servicing guide (PDF) covers a light monthly clean with a silicone-based spray - not an oil like WD40 - and a yearly service with the lock off the door.
• Reading Borg item codes: the codes carry the key facts - PB for polished brass, SC for satin chrome, ECP for Easicode Pro - and Chapter 16 decodes the naming.

Warranty

Borg Locks Warranty - 12 Months (Australia)
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.

Purchased through Terry's Tradies Pty Ltd or one of its associated trading names? Contact us first - we will manage your warranty claim with the Australian distributor (LSC) on your behalf. This warranty operates alongside your rights under the Australian Consumer Law.

Returns & Warranty | Borg Locks Australia Warranty Statement (PDF)

Download PDF Resources

Borg BL2000 Series Instruction Manual (PDF)
Borg's manual for the 2000 series lock this keypad belongs to - contents, handing, fitting, the On The Bench code change and a problem solving guide.

Borg Non-ECP Code Change Instructions - BL2000 (PDF)
Borg's one-page On The Bench code change sheet for the 2000 series, including how the spare pieces lengthen or shorten the code.

Borg BL2000 Series Product Leaflet (PDF)
Borg's leaflet for the light duty 2000 series - the models, features, finishes and dimensioned drawings, including the 2000 series keypad.

Borg 2000 Series Accessories (PDF)
The keypad-only unit beside the Lockwood conversion kits, scar plates and key override plates - and a note that none of the kits includes a keypad.

Borg Servicing Guide (PDF)
Borg's maintenance guide for its pushbutton keypad locks - a light clean every month and a yearly service with the lock off the door.