Skip to main content

FORGE H100 Double-Sided Outdoor Gate Smart Lock - IP68, Fingerprint, Tuya App

Forge

Terry's Online Price $861.77
(No reviews yet) Write a Review
SKU:
STK FEDBHDH1UA
UPC:
0665386645636
Availability:
Usually Ships in 24 Hours
Access Method:
App Enabled
Access Method:
Bluetooth
Access Method:
WiFi
Access Method:
Pin Code
Access Method:
Fob/Card/RFID
Access Method:
Has Backup Key
Access Method:
Fingerprint
Back-Set:
Short
Back-Set:
25mm
Back-Set:
28mm
Back-Set:
30mm
Back-Set:
35mm
Back-Set:
40mm
Back-Set:
45mm
Back-Set:
50mm
Back-Set:
60mm
Colour/Finish:
Black
Feature:
Rain Resistant
Feature:
Built-In WiFi
Type of Handle:
Lever
Type of Lock:
Mortice
atc-product:
10790
Feature:
Keypad on Both Sides
Feature:
Suits Thick Doors
Adding to cart… The item has been added
FORGE Logo

FORGE H100 Double-Sided IP68 Outdoor Gate Smart Lock - TUYA

At A Glance

At A Glance
FingerprintFingerprint
(Both Sides)
PIN codePIN Code
(Both Sides)
RFID cardRFID Card
(Both Sides)
Forge Smart (Tuya) app over Wi-FiForge Smart (Tuya) App
(Wi-Fi)
Remote unlock on a 9# requestRemote Unlock
(On Request)
Mechanical keyMechanical Key

The FORGE H100 Double-Sided IP68 Outdoor Gate Smart Lock (FEDBHDH1UA) is built for exposed gates: both lever panels are IP68 rated, each with a fingerprint reader, keypad and card reader, on a 304 stainless steel mortice with a latch and a deadbolt, and a key as the backup.

Wi-Fi is built in: it runs on the Forge Smart (Tuya) app with no gateway, and remote unlock is request-based - someone at the gate presses 9# and you approve it in the app. Choose your mortice backset at checkout (25-60 mm). It suits gates and doors 50-120 mm thick, and its 4,000 mAh rechargeable battery sits in a separate box set into the gate.

Passage mode can be set separately on the outside and inside panels. For TTLock with a gateway, see the FORGE H10D; for a surface-mounted gate lock with a camera, the FORGE RD6. Made in China for FORGE, an Australian brand based in Ringwood, Victoria. Backed by a 2-year manufacturer warranty.

Dispatch
Estimated Dispatch
Usually ships in 24 hours.
About FORGE
Owned by FORGE Electrical (Australia) · Manufactured in China. Our independent FORGE brand profile sets out how the range compares with the other brands we stock.

Access Methods

Access Method Available Details
Fingerprint Yes - up to 100, both sides Readers under sliding covers on both panels. Fingerprints are registered on each side separately - register an administrator fingerprint on the inside panel too.
PIN Code Yes - up to 199, both sides Touch keypads on both panels; administrator codes are 6-12 digits. Codes sync between the panels. You can add random digits around a code - the correct code must be within the first 16 digits.
RFID Card Yes - up to 199, both sides MIFARE M1 cards; two come in the box, and extra FORGE MIFARE 1K cards are sold separately.
Forge Smart (Tuya) App Yes - Wi-Fi The lock joins your 2.4 GHz Wi-Fi and is managed in the Forge Smart (Tuya) app - users, passwords, records and notifications.
Remote Unlock On request Someone at the gate presses 9# on the keypad and you approve the request in the app - Forge Smart (Tuya) remote unlock answers a request at the lock rather than opening on demand.
Mechanical Key Yes Euro cylinder through the mortice - the keyhole on the outside panel sits under the cover that also protects the emergency power port. Two keys are included.

Lift the lever to throw the deadbolt; press it down from either side with a valid credential to open.

Forge Smart (Tuya) App

Tuya logo

Set the H100 up in the Forge Smart (Tuya) app, for iOS and Android iOS App StoreAndroid Google Play. Register an administrator on the keypad first - swipe, press *#123456#, then 2 and 4 - and repeat a fingerprint administrator on the inside panel, because fingerprints are stored per side (manual page 15). Then sign up in the app choosing Australia, give it full permissions and turn Bluetooth on. The lock needs a 2.4 GHz network. On the lock press *#, your administrator credential and #, then 1 Wireless Settings and 1 Add Module, and add Lock (Wi-Fi) in EZ Mode within about 2 minutes (manual page 17).

Until an administrator is registered, the lock is in its initial state - the default code 123456 works and it opens to any fingerprint, code or card (manual page 14).

Tuya
Wi-Fi built in - remote unlock on request
Wi-Fi is built into the H100, so there is no gateway to buy for remote access. Remote unlock works on request: someone at the gate presses 9# on the keypad to send a request, and you approve it in the app (manual page 18). Forge Smart (Tuya) locks do not unlock on demand from off-site, have no scheduled passage mode in the app and no Alexa or Google, and have no API. Online and offline passwords, entry records, notifications and Tuya automations work from the app - see the Forge Smart (Tuya) platform in Chapter 15. Online passwords can be limited to weekdays and sync once the lock is online; offline passwords are system-generated and must be used within 24 hours.

Which platform suits you is set out in our TTLock vs Tuya comparison and which smart lock platform is right for you. For on-demand remote unlock and scheduled passage mode on a gate, look at a TTLock gate lock such as the H10D with a gateway.

Key Features

  • Double-sided: a fingerprint reader, keypad and card reader on each panel - why double-sided locks suit gates.
  • IP68 on both the outside and inside panels, with waterproof data connections and silicone-sealed electronics.
  • Full-metal aluminium lever panels on a 304 stainless steel mortice with a latch and a deadbolt; euro cylinder and key backup.
  • Mortice chosen at checkout: 25, 28, 30, 35, 40, 45, 50 or 60 mm swing backset.
  • Fingerprint (up to 100), PIN code (up to 199), RFID card (up to 199), the Forge Smart (Tuya) app and a mechanical key.
  • Wi-Fi built in on Forge Smart (Tuya) - no gateway; remote unlock on a 9# request.
  • Passage mode set separately on each panel - from the keypad menu or the 5# shortcut.
  • Dual verification, anti-pry alarm, voice menus and a low-battery voice warning.
  • 4,000 mAh rechargeable battery in a separate box in the gate - up to about 12 months - with emergency USB power; what happens when the battery dies.
  • For outdoor gates exposed to rain 50-120 mm thick - one of our app-enabled smart locks.

What's in the Box

FORGE H100 Double-Sided IP68 Outdoor Gate Smart Lock
  • Exterior lock panel x1
  • Interior lock panel x1
  • Mortice x1 - the backset you choose
  • Latch plate x1
  • Lock cylinder x1
  • Keys x2
  • IC (RFID) cards x2
  • Rechargeable lithium battery x1
  • Installation accessories kit x1
  • Cut-out template x1
  • User manual x1

The battery box and its covers are part of the lock set (see the assembly overview). Extra MIFARE 1K cards are sold separately.

Suitable Uses

  • Pedestrian and garden gates fully exposed to the weather (external gate smart locks) - both panels are IP68.
  • Gates that should need a credential to leave as well as to enter - the inside panel reads fingerprints, codes and cards too.
  • Steel and aluminium gate frames that give 55 mm of width or depth for the battery box, 50-120 mm thick.
  • Homes, apartment entries and staff gates that want app control and alerts over Wi-Fi without a gateway, with passage mode on busy days.
Not suitable for
  • Pool gates - a self-closing, self-latching pool gate has its own rules; ask us first (latch or bolt on pool gates).
  • Gate frames under 55 mm on both the width and the thickness - there is no room for the battery box.
  • Gates thinner than 50 mm or thicker than 120 mm.
  • Sites that need on-demand remote unlock, scheduling or Alexa / Google - choose a TTLock gate lock with a gateway.
  • Prolonged submersion, high-pressure jets, saltwater or chemical exposure - outside the IP68 rating in the manual.

Gate Fit, Mortice and Backset

Choose your mortice backset at checkout. The H100 comes with a choice of swing mortice - backsets of 25, 28, 30, 35, 40, 45, 50 or 60 mm - measured from the edge of the gate (or the faceplate) to the centre of the lock. The 304 stainless steel mortice carries a latch and a deadbolt. How to measure backset, and for slim posts see gate post too narrow for a 60 mm latch.

Backset (choose at checkout) Mortice case depth
Swing - 25 mm 40 mm
Swing - 28 mm 43 mm
Swing - 30 mm 46 mm
Swing - 35 mm 51 mm
Swing - 40 mm 57 mm
Swing - 45 mm 60 mm
Swing - 50 mm 66 mm
Swing - 60 mm 77 mm

Case depths are from the swing-door mortice size guide below (240 x 22 mm faceplate).

Measure before you choose your backset
  • Gate-frame width - the outside face width of the frame section at the lock position, such as the face of the RHS.
  • Gate-frame thickness - the outside depth of the same section at the lock position.
  • Battery box - FORGE needs at least 55 mm on either the frame width or the frame thickness for the battery compartment.
  • Closed gap at the latch - measure from gate to post with the gate shut. The latch projects 12 mm; we recommend a gap of 10 mm or less, and wider gaps may need installation adjustments.
  • Mortice depth - the case depth for the backset you choose (table above) has to fit inside the frame.
  • Flush or surface-mounted faceplate - the template has a 2 mm allowance at the gate edge for a surface-mounted faceplate.
  • Gate thickness - 50-120 mm.
  • Tight fits - where the numbers only just work, send us your measurements or a photo of the gate edge and frame and we will check the backset with you.
Confirm the frame dimensions, the mortice depth and the gate-to-post gap with us before ordering.
FORGE swing door mortice size chart - mortice drawings for 25, 28, 30, 35, 40, 45, 50 and 60 mm backsets with case depths of 40 to 77 mm and a 240 x 22 mm faceplate
the swing-door mortice size guide: the mortice for each backset from 25 to 60 mm, with case depths of 40 to 77 mm and a 240 x 22 mm faceplate.

The 35 mm backset installation template marks the mortice pocket (18 x 190 mm), the battery-box recess (35 x 122 mm), the spindle, cable and cylinder passages and the fixing holes - move the lock centreline to the backset you choose. The FAQ and key notes explain why the template is drawn at 35 mm.

Available Finish Options

  • Black
    Black
    (This Product)
    STK FEDBHDH1UA

FORGE Outdoor Gate and Rim Smart Locks

Image Model Item Code Credentials Weather App and Remote
FORGE H1 double-sided outdoor gate smart lock FORGE H1 gate lock (TTLock H1T / TUYA H1A) FEDBHDH1T / FEDBHDH1A Both sides IP65 TTLock with a gateway, or Forge Smart (Tuya) Wi-Fi
FORGE H1S double-sided outdoor gate smart lock in black FORGE H1S gate lock FELKH1SS Both sides IP66 TTLock - gateway for remote
FORGE H10D double-sided outdoor gate smart lock in silver FORGE H10D gate lock FEDLH10D / FEDLH10DS Both sides IP66 TTLock - gateway for remote
FORGE H10S single-sided outdoor gate smart lock in silver FORGE H10S gate lock FEDLH10S / FEDLH10SS Outside only IP66 TTLock - gateway for remote
FORGE H100 IP68 double-sided outdoor gate smart lock FORGE H100 gate lock (this product) FEDBHDH1UA Both sides IP68 Forge Smart (Tuya) - Wi-Fi built in
FORGE H4 outdoor lever smart lock in brushed stainless and matt black FORGE H4 outdoor lever FELKGH2 Outside only IP65 TTLock - gateway for remote
FORGE H60 outdoor smart lock - inside and outside handles FORGE H60 outdoor lock (TTLock / TUYA) FESLHDH4TT / FESLHDH4TY Outside only IP65 TTLock with a gateway, or Forge Smart (Tuya) Wi-Fi
FORGE RD1T outdoor smart rim lock - keypad and rim lock FORGE RD1T rim lock (TTLock / TUYA) FERMOTTA / FERMOTYA Outside keypad IP66 TTLock with a gateway, or Forge Smart (Tuya) Wi-Fi
FORGE RD6 double-sided video doorbell smart rim lock - keypad, rim lock and remote FORGE RD6 rim lock FERMRD6B Both sides IP66 Forge Smart (Tuya) - Wi-Fi built in; remote included

This product is the bold row. 'Both sides' means credentials can be used from inside as well as outside - see why double-sided locks suit gates. Every model here is in our external gate range.

Accessories and Spares

Image Accessory Item Code Use With This Lock
FORGE MIFARE 1K RFID cards FORGE MIFARE 1K RFID Card FECARDGSLKA Extra MIFARE M1 cards - the H100 stores up to 199.
FORGE Zigbee 3.0 and Bluetooth dual mode gateway - white FORGE Zigbee 3.0 and Bluetooth Dual Mode Gateway FESMBTZGBDGTWYA Optional Tuya hub. The H100 has Wi-Fi built in, so it needs no gateway for remote access; add this gateway to run Bluetooth-only FORGE Tuya locks, or other Zigbee 3.0 and Bluetooth Tuya devices, alongside it.
FORGE Zigbee 3.0 and Bluetooth gateway with IR control - black FORGE Zigbee 3.0 and Bluetooth Gateway with IR Control FESMBTZGBIRGTWA The same optional hub with infrared control added - TVs, air-conditioners and other infrared appliances from the app, alongside the lock.

No gateway is needed - Wi-Fi is built in; the two Tuya gateways are optional hubs for the rest of a Tuya setup. There is no remote or weather cover for the H100. More cards and fobs are in the RFID credentials range.

Battery and Emergency Power

Power, warnings and backup
The H100 runs on a 4,000 mAh rechargeable lithium battery in its own box, set into the gate edge or inside face - it is rated at up to about 12 months, depending on use, network conditions and the environment. Charge it fully before fitting (manual page 8). A voice prompt warns when it is low, with about 50-200 unlocks left - recharge then. If it goes flat, connect a power bank to the emergency USB port under the outside keyhole cover with a USB-A to USB-C cable and unlock normally (manual page 19), or use the key. More on what really affects battery life and power and battery FAQs.

Weather Rating - IP68 Both Panels

Weather ratingWeather rating
IP68 outside and inside panels
Both the outside and inside panels are rated IP68, with waterproof data connections and silicone-sealed internal electronics, for gates exposed to rain, dust, frost and condensation. The rating covers protection against dust and water including temporary submersion under controlled conditions - not prolonged submersion, high-pressure jets, chemicals, saltwater or corrosive exposure - and covers are advised in marine or industrial sites (manual page 21). Correct installation and maintenance still matter on the coast - read coastal environments, IP ratings explained and Queensland considerations.
IP68 rating explained: dust tight and protected against continuous immersion

FORGE H100 - Technical Specifications

Brand FORGE (FORGE Electrical, Ringwood VIC)
Item Code FEDBHDH1UA
Model H100 (double-sided IP68 gate lock)
Product Type Double-sided outdoor gate and door smart lock - lever panels on a mortice
Origin Owned by FORGE Electrical (Australia) · Manufactured in China
App Platform Forge Smart (Tuya) app
Connectivity Wi-Fi built in (2.4 GHz only) - no gateway
Remote Unlock On request - 9# at the keypad, approved in the app
Access Methods Fingerprint, PIN code and RFID card on both panels; Forge Smart (Tuya) app; mechanical key
Fingerprint Capacity 100
Passcode Capacity 199
RFID Card Capacity 199 (MIFARE M1, manual)
Construction Full-metal aluminium lock panels; 304 stainless steel mortice with latch and deadbolt; euro cylinder
Panel Size 360 x 37 mm; 133 mm across the lever; 24 mm deep, 67 mm at the lever
Gate Thickness 50-120 mm - measuring door thickness
Mortice Backsets Swing 25, 28, 30, 35, 40, 45, 50 or 60 mm - choose at checkout
Gate Frame At least 55 mm on the frame width or thickness for the battery box
Gate-to-Post Gap 10 mm or less recommended; the latch projects 12 mm
Opening Direction Left or right hand, inward or outward opening
Power 4,000 mAh rechargeable lithium battery in a separate battery box
Battery Life Up to about 12 months
Low-Battery Warning Voice prompt, about 50-200 unlocks left
Emergency Power USB port under the outside keyhole cover (USB-A to USB-C cable)
IP Rating IP68 (outside and inside panels) - IP ratings explained
Operating Range -30 to 65 degrees C; 10-93% RH
Functions Passage mode per panel, dual verification, anti-pry alarm, voice menus, volume, mute
Security Lockout More than 5 wrong codes = 90 second lockout
Factory Reset Reset button on the battery box - hold until two beeps
Finish Black (as pictured)
Warranty 2 years

Dimensions

FORGE H100 dimensions - lock panel 360 mm high and 37 mm wide, 133 mm across the lever, 24 mm deep and 67 mm at the lever, and the battery box
Dimensional drawing of the H100: the lock panel is 360 mm high and 37 mm wide - 133 mm across the lever - and 24 mm deep, 67 mm at the lever; the battery box is drawn alongside (manual page 3).

Check the gate thickness (50-120 mm), the frame for the battery box and the gap to the post - see Gate Fit above, and frame size options for narrow posts.

Installation

The H100 fits the mortice you choose into the gate edge, a battery box into the edge or inside face, and clamps the two lever panels together through the gate with a data cable between them. The installation section of the manual runs through each step with drawings.

Installation Tips
  • Cut the gate for the mortice and the battery box using the template as a guide (manual page 6). Fit the mortice latch on top, deadbolt below - the latch reverses by lifting the flap, pushing it in and turning it 180 degrees - then insert the cylinder and fix it with its screw (manual page 7).
  • Fit the charged battery in its box with the waterproofing and outer covers, and run one battery cable through the passage to each side (manual page 8).
  • Set the handle direction with the Allen key under the rotor, and point the spindle-hub mark towards the hinge on both panels (manual page 9).
  • Cut the spindle to stand 5 mm proud of the far face (manual page 10; the spindle mistake in Chapter 12), then fit both panels with their silicone pads and the data cable (manual page 11).
  • Check: pressed down it stays locked, lifting throws the deadbolt, 123456# plus the lever opens it, and the key turns 90 degrees (manual page 13).
  • Terry's offers installation across the Gold Coast.

Which way a door is handed is explained in how to tell which way your door or gate opens.

Frequently Asked Questions

Do I need a gateway?
No - Wi-Fi is built in, so the H100 needs no gateway for remote access; the FORGE Tuya gateways are optional hubs. It needs a 2.4 GHz network.
Can I unlock it from anywhere?
On request: someone at the gate presses 9# and you approve it in the app. It does not unlock on demand without someone at the lock.
Which backsets are offered?
25, 28, 30, 35, 40, 45, 50 or 60 mm swing mortices - choose at checkout.
Will it fit my gate frame?
The frame needs at least 55 mm on its width or thickness for the battery box, the gate must be 50-120 mm thick, and the closed gap at the latch should be 10 mm or less.
Can the H100 go under water?
The IP68 rating covers temporary submersion under controlled conditions - not prolonged submersion, pressure washing, saltwater or chemicals.

Additional Information

  • Register an administrator straight away. Until then the H100 opens to any fingerprint, code or card.
  • Register fingerprints on both panels. Codes and cards sync between the panels; fingerprints do not.
  • Remote unlock is a request, not a button. Someone has to press 9# at the lock for you to approve.
  • Measure the frame before choosing a backset. The battery box needs 55 mm and the mortice case has to fit.
  • Charge the battery before fitting, and keep the keys away from the gate (key storage ideas).

Warranty

Warranty
Warranty
2-year FORGE warranty from the date of delivery - covers defects in materials and workmanship under normal use. Excludes improper installation or maintenance, misuse, accident, normal wear and tear (including fading or dulling of finishes) and water damage beyond the product's rated IP protection. Proof of purchase required for all claims. Returns & Warranty | FORGE warranty terms

Download PDF Resources

FORGE H100 Double-Sided Waterproof IP68 Outdoor Smart Lock Product Manual - Installation and System Settings (PDF)
24-page manual (Version 1.5) - specifications and dimensions, the parts and battery box, installation including the mortice, cylinder, battery box, handle direction and spindle, checks, the *# menus, first administrator, passage mode and dual verification, Forge Smart (Tuya) app pairing on 2.4 GHz Wi-Fi, request-based remote unlock, online and offline passwords, emergency power, factory reset and the IP68 limits.
FORGE H100 Outdoor Gate Lock 35 mm Backset Installation Template (PDF)
1:1 drilling template drawn at a 35 mm backset - the mortice housing (18 x 190 mm), the battery-box recess, the spindle, data cable and cylinder passages and the fixing holes. Move the lock centreline to the backset you order.
FORGE FAQ and Key Notes - Semi-Automatic Digital Lock Installation (PDF)
Four-page FAQ for the semi-automatic double-sided gate locks - why the template is drawn at 35 mm, changing the handle direction, reversing the latch and cutting the spindle 5 mm proud. It names no model and its template drawing is the H1's; it comes with the H100, and the steps match the H100 manual.
Tuya Smart App Pairing Guide (Wi-Fi locks) (PDF)
A generic two-page pairing sheet for Tuya Wi-Fi locks - pairing mode, 2.4 GHz Wi-Fi, remote unlock on request and temporary passwords. Its screens show the Tuya Smart app; the H100 itself pairs in the Forge Smart (Tuya) app.
FORGE Logo

FORGE H100 Double-Sided IP68 Outdoor Gate Smart Lock - FAQ, Setup and Owner's Guide

Everything below is here to help you choose, fit, set up and live with the FORGE H100. For general smart lock questions see our Smart Lock FAQ (Chapter 13), and for measuring and fitting the Buyer's Guide.

Choosing a FORGE Gate Lock

How does the H100 compare with the H1 and H10D?
All three are double-sided lever gate locks on a mortice. The H100 is IP68 on both panels and runs on Forge Smart (Tuya) Wi-Fi with a separate battery box; the H10D is IP66 on TTLock; the H1 is IP65 in TTLock or TUYA versions. See our FORGE profile.
Do I need a weather cover?
There is no cover for the H100 - both panels are IP68. A cover is still advised in marine or industrial sites.

Forge Smart (Tuya) App and Wi-Fi

Which app does it use?
The Forge Smart (Tuya) app (manual page 17).
Why will it not join my Wi-Fi?
It needs a 2.4 GHz network. If your router merges its bands, see band steering. If the Wireless Setting menu is missing, factory reset and press 6215# in the initial state to re-activate the wireless module (manual page 14).
How does remote unlock work?
Someone at the gate presses 9#; you get a request in the app and approve it (manual page 18).
What is the difference between online and offline passwords?
Online passwords can carry weekday limits and sync to the lock once it is on Wi-Fi. Offline passwords are generated by the system and must be used for the first time within 24 hours.

Platform and Data

Which platform does the H100 run on, and where is my data held?
The H100 runs on the Forge Smart (Tuya) app, with Wi-Fi built in - it joins your 2.4 GHz network directly, with no gateway. Remote unlock is request-based (9# at the keypad). Tuya is a Chinese company headquartered in Hangzhou with regional data centres; Tuya provisions Australian accounts to its Central Europe data centre, and there is no Australian data centre. The region the Forge Smart (Tuya) app uses for Australian accounts is being confirmed. For the platform-by-platform picture see where each smart lock platform hosts its data, and for how Tuya compares with TTLock data sovereignty in our TTLock vs Tuya comparison.

Credentials and Settings

How do I add the first administrator?
Swipe the keypad, press *#123456#, then 2 and 4, and register a fingerprint, code or card - codes are 6-12 digits (manual page 15).
How does passage mode work?
Turn it on in the settings or with the shortcut 5# plus an administrator credential; press # to turn it off. Each panel is set separately (manual page 16).
What is dual verification?
When it is on, two standard users' credentials are needed to open; administrators are exempt.
What happens after several wrong attempts?
More than five wrong codes start a 90 second protection period.

Gate Fit and Mortice

Which backsets are offered?
25, 28, 30, 35, 40, 45, 50 or 60 mm - choose at checkout.
What gate thickness does it suit?
50-120 mm.
Why does the frame need 55 mm?
The battery box fits into the gate edge or inside face, so FORGE needs at least 55 mm on the frame width or thickness.

Power and Batteries

How long does a charge last?
Up to about 12 months on the 4,000 mAh battery - recharge when the voice prompt warns, with about 50-200 unlocks left.
How do I power it in an emergency?
Connect a power bank to the USB port under the outside keyhole cover with a USB-A to USB-C cable and unlock normally (manual page 19), or use the key.

Installation and Troubleshooting

Why will the lock not lock after fitting?
Check the spindle-hub marks point towards the hinge on both panels and the spindle stands only 5 mm proud (manual page 9; manual page 10).
How do I factory reset it?
Take off the battery cover and hold the Reset button on the battery box until two beeps (manual page 20). It returns to 123456 and the open initial state.

Related Products, Guides and Chapters

FORGE Logo

What's in the Box - FORGE H100 Double-Sided IP68 Outdoor Gate Smart Lock

FORGE H100 assembly overview - battery, battery box with waterproofing and outer covers, panels, threaded sleeves, connection screws, euro cylinder, mortice and spindle
Assembly overview from the H100 manual (page 5).
  • Exterior lock panel x1
  • Interior lock panel x1
  • Mortice x1 - the backset you choose
  • Latch plate x1
  • Lock cylinder x1
  • Keys x2
  • IC (RFID) cards x2
  • Rechargeable lithium battery x1
  • Installation accessories kit x1
  • Cut-out template x1
  • User manual x1
The battery box and its covers are part of the lock set (see the assembly overview). Extra MIFARE 1K cards are sold separately.
FORGE Logo

FORGE H100 Double-Sided IP68 Outdoor Gate Smart Lock - Dimensions

FORGE H100 dimensions - lock panel 360 mm high and 37 mm wide, 133 mm across the lever, 24 mm deep and 67 mm at the lever, and the battery box
Dimensional drawing of the H100: the lock panel is 360 mm high and 37 mm wide - 133 mm across the lever - and 24 mm deep, 67 mm at the lever; the battery box is drawn alongside (manual page 3).
FORGE swing door mortice size chart - mortice drawings for 25, 28, 30, 35, 40, 45, 50 and 60 mm backsets with case depths of 40 to 77 mm and a 240 x 22 mm faceplate
the swing-door mortice size guide - 25 to 60 mm backsets, 240 x 22 mm faceplate.
FORGE Logo

FORGE H100 Double-Sided IP68 Outdoor Gate Smart Lock - User Manual

The H100 manual (Version 1.5), page by page. The two blank pages and the back cover are left out. Prefer the PDF? Download the manual.

FORGE H100 user manual page 1 - Cover - FORGE H100, SKU FEDBHDH1UA, Version 1.5
Page 1 - Cover - FORGE H100, SKU FEDBHDH1UA, Version 1.5
FORGE H100 user manual page 2 - Specifications
Page 2 - Specifications
FORGE H100 user manual page 3 - Dimensions
Page 3 - Dimensions
FORGE H100 user manual page 4 - Overview - inside and outside panels
Page 4 - Overview - inside and outside panels
FORGE H100 user manual page 5 - Assembly overview - battery box, panels, cylinder and mortice
Page 5 - Assembly overview - battery box, panels, cylinder and mortice
FORGE H100 user manual page 6 - Step 1 - prepare the door profile
Page 6 - Step 1 - prepare the door profile
FORGE H100 user manual page 7 - Step 2 - mortice and cylinder
Page 7 - Step 2 - mortice and cylinder
FORGE H100 user manual page 8 - Step 3 - battery box
Page 8 - Step 3 - battery box
FORGE H100 user manual page 9 - Step 4 - handle direction
Page 9 - Step 4 - handle direction
FORGE H100 user manual page 10 - Step 5 - spindle adjustment
Page 10 - Step 5 - spindle adjustment
FORGE H100 user manual page 11 - Step 6 - external handle
Page 11 - Step 6 - external handle
FORGE H100 user manual page 12 - Step 7 - internal panel
Page 12 - Step 7 - internal panel
FORGE H100 user manual page 13 - Post-installation inspection
Page 13 - Post-installation inspection
FORGE H100 user manual page 14 - Introduction - users and the *# menu
Page 14 - Introduction - users and the *# menu
FORGE H100 user manual page 15 - Initial setup - administrator and users
Page 15 - Initial setup - administrator and users
FORGE H100 user manual page 16 - Functions - passage mode and dual verification
Page 16 - Functions - passage mode and dual verification
FORGE H100 user manual page 17 - Connecting to the Forge Smart (Tuya) app
Page 17 - Connecting to the Forge Smart (Tuya) app
FORGE H100 user manual page 18 - App functions - remote unlock request and passwords
Page 18 - App functions - remote unlock request and passwords
FORGE H100 user manual page 19 - Important notes - low battery, emergency power, lockout
Page 19 - Important notes - low battery, emergency power, lockout
FORGE H100 user manual page 20 - Hardware factory reset
Page 20 - Hardware factory reset
FORGE H100 user manual page 21 - IP68 limits and non-warranty items
Page 21 - IP68 limits and non-warranty items
FORGE Logo

PDF Files - FORGE H100 Double-Sided IP68 Outdoor Gate Smart Lock

FORGE H100 Double-Sided Waterproof IP68 Outdoor Smart Lock Product Manual - Installation and System Settings (PDF)
24-page manual (Version 1.5) - specifications and dimensions, the parts and battery box, installation including the mortice, cylinder, battery box, handle direction and spindle, checks, the *# menus, first administrator, passage mode and dual verification, Forge Smart (Tuya) app pairing on 2.4 GHz Wi-Fi, request-based remote unlock, online and offline passwords, emergency power, factory reset and the IP68 limits.
FORGE H100 Outdoor Gate Lock 35 mm Backset Installation Template (PDF)
1:1 drilling template drawn at a 35 mm backset - the mortice housing (18 x 190 mm), the battery-box recess, the spindle, data cable and cylinder passages and the fixing holes. Move the lock centreline to the backset you order.
FORGE FAQ and Key Notes - Semi-Automatic Digital Lock Installation (PDF)
Four-page FAQ for the semi-automatic double-sided gate locks - why the template is drawn at 35 mm, changing the handle direction, reversing the latch and cutting the spindle 5 mm proud. It names no model and its template drawing is the H1's; it comes with the H100, and the steps match the H100 manual.
Tuya Smart App Pairing Guide (Wi-Fi locks) (PDF)
A generic two-page pairing sheet for Tuya Wi-Fi locks - pairing mode, 2.4 GHz Wi-Fi, remote unlock on request and temporary passwords. Its screens show the Tuya Smart app; the H100 itself pairs in the Forge Smart (Tuya) app.
FORGE Logo

FORGE H100 Double-Sided IP68 Outdoor Gate Smart Lock - Product Gallery

The H100 on a black gate: dual-sided IP68, passage mode on both sides, remote unlock and temporary passcodes
On a gate - remote unlock here means approving a 9# request.
The H100's fingerprint sensor cover, backup power port and keyhole, and the cold and heat tests
The protected fingerprint reader, the backup power port and keyhole, and the -30 and 60 degree C tests.
FORGE Logo

FORGE Warranty

FORGE Electrical products sold by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries are covered by FORGE's 2-year warranty against defects. All warranty claims are lodged with us, and we liaise with FORGE on your behalf.

Warranty Summary

DetailCoverage
WarrantorFORGE Electrical
Duration2 years from the date of delivery
Who is coveredThe original purchaser
What is coveredDefects in materials and workmanship under normal use and service
RemedyRepair or replacement of the product or faulty part, with new or refurbished goods, at FORGE's discretion and at no charge
Proof of purchaseRequired for all claims
Applies toFORGE-branded products only

How to Make a Claim

For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
  1. Notify us in writing within the 2-year warranty period, including your proof of purchase and a description of the fault.
  2. We will assess your claim with FORGE and advise the next steps. The product may need to be returned for assessment.
  3. Where the defect is covered, FORGE will repair or replace the product or faulty part at no charge.

Exclusions

The FORGE warranty does not cover:

  • Improper installation, maintenance or operation, including not following FORGE's product specifications or instructions
  • Normal wear and tear
  • Misuse, abuse, negligence or accident
  • Modification by anyone other than FORGE Electrical
  • External causes such as natural disasters
  • Damage from excessive rain, water ingress, flooding or other liquid exposure beyond the product's rated IP protection level
  • Cosmetic ageing of outdoor finishes - light colour fading, surface dulling or minor oxidation from UV exposure, humidity and temperature changes
IP Ratings Are Not a Guarantee Against Extreme Weather
IP ratings on FORGE outdoor locks are intended for general outdoor conditions - rain, sun and dust. They do not guarantee performance under extreme exposure such as driving rain, hailstorms, constant salt spray, flooding or immersion.

Important Notes

Outdoor Installations
In unusually harsh or exposed locations, FORGE strongly recommends fitting a rain cover or protective hood over the lock to shield it from direct weather and driving rain. If your product has been exposed to water, contact us for support.
Your Rights Under the Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The FORGE warranty is in addition to these rights.
Ask our expert locksmith - 30 years experience

Confused? Overwhelmed? We get it.

Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.

Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.

Get Your Free Recommendation →

How it works - three easy steps:

1. Upload photos

A few clear shots of your door, lock and frame - inside and out.

2. We assess

Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.

3. You get a recommendation

A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.

Also useful while you are deciding: