FORGE H10D Double-Sided Gate Smart Lock - IP66, Fingerprint, TTLock
At A Glance
(Add G5 Gateway)
The FORGE H10D Double-Sided Outdoor Gate Smart Lock (FEDLH1) has a glass touch keypad, a card reader and a fingerprint reader on both handles, so the gate stays locked from either side until someone uses a credential - why double-sided matters on a gate. It runs on the TTLock app and comes in black (FEDLH10D) or silver (FEDLH10DS).
It stores up to 100 fingerprints, 250 passcodes and 1,000 cards, keeps the last 300 events, and runs on a rechargeable lithium battery rated at 3,000 or more unlocks per charge, with a USB-C emergency port and a mechanical key under the outside handle. The aluminium handles are 39.3 mm wide and suit gates and doors 35-100 mm thick; the mortice comes in backsets from 25 to 60 mm, and you choose yours at checkout.
It is rated IP66, with a rubber-sealed battery compartment. Add the FORGE TTLock G5 gateway (sold separately) for remote unlocking from anywhere. It is made in China for FORGE, an Australian brand based in Ringwood, Victoria. Backed by a 2-year manufacturer warranty. Need a keypad on the outside only? The FORGE H10S is the single-sided version.
Usually ships in 24 hours.
Owned by FORGE Electrical (Australia) · Manufactured in China. Our independent FORGE brand profile sets out how the range compares with the other brands we stock.
Access Methods


TTLock App
Set the lock up in the free TTLock app, available for iOS and Android ![]()
. Choose Australia as your location when you sign up, give the app full permissions and turn Bluetooth on. Until the first administrator is added the lock is in its factory state - the default admin code is 123456 and any fingerprint will open it - so pair it as soon as it is fitted. The TTLock pairing guide shows the steps; keep your phone within 2 metres while pairing. The introduction pages of the manual cover the same ground for this model. The H10D's outside and inside handles are added as two separate locks - we suggest naming them "Front Gate - External" and "Front Gate - Internal".
TTLock is one of the two global smart lock platforms - how it compares with Tuya is set out in our TTLock vs Tuya comparison, and the wider TTLock range in Chapter 14 - the TTLock hardware ecosystem. The app itself is covered in the TTLock app user manual.
Without a gateway the H10D is managed over Bluetooth when your phone is near the gate - see what a TTLock lock can do without Wi-Fi. The FORGE TTLock G5 gateway is the optional add-on for remote Wi-Fi management and unlocking: with it plugged in within range you can unlock on demand from anywhere, change codes, check records and set a passage-mode schedule remotely - Bluetooth vs gateway in Chapter 14. Remote Unlock has to be switched on in the app and Power Saving Mode turned off.
Key Features
- Double-sided: fingerprint, PIN and card on both handles, and both handles stay locked until a credential is used - nobody can reach over the gate and open it from inside (the benefits on gates).
- Fingerprint (up to 100), PIN code (up to 250) and RFID card (up to 1,000 M1 cards) - compare them in Chapter 03.
- Bluetooth unlock from the TTLock app within about 5-10 metres; add the G5 gateway for Wi-Fi remote access from anywhere (the G5 gateway explained).
- Aluminium handles with UV-resistant glass touch keypads, 39.3 mm wide; lift the handle to throw the deadbolt. The mortice comes in backsets from 25 to 60 mm - choose yours at checkout.
- Operation log of the last 300 events, and no limit on app-generated dynamic passcodes.
- Rechargeable lithium battery (at least 3,000 unlocks per charge), a 5 V 1 A USB-C emergency port and a mechanical key under the outside handle - what happens when the battery dies.
- Forced Fingerprint - a duress fingerprint that opens the lock and sends the administrator an alarm notification. It is for emergencies, not daily use.
- Passcodes, fingerprints and cards can be permanent, time-limited or recurring; passcodes can also be one-time.
- Passage Mode with a schedule set in the app - the gate stays unlocked for the set period once it has been unlocked by hand, then locks again (what passage mode does).
- Reversible handing - the handles swap direction for left- or right-hand gates, and the latch turns around for gates that open inward or outward.
- After five wrong attempts in a row the lock ignores all input for 90 seconds, and it goes back to sleep after 20 seconds without use.
- Built for gates exposed to rain: rated IP66 inside and out; one of our app-enabled smart locks.
What's in the Box
- Exterior (outside) lock handle x1
- Interior (inside) lock handle x1
- Mechanical keys x2
- IC (RFID) cards x2
- Installation accessories kit x1
- Mortice x1
- Latch plate x1
- Rechargeable lithium battery x1
- Cut-out template x1
- User manual x1
The installation accessories kit holds the rubber base pads, the threaded connection sleeves (2), the connection screws (2), the rubber battery seal, the rubber plug and the spindle, as the parts image shows. Charge the lithium battery fully before you fit it. The TTLock G5 gateway, the TTLock remote, the FORGE weather cover and extra MIFARE 1K cards are sold separately.
Suitable Uses
- Front, side and courtyard gates on homes and townhouses - see where gates sit in the door type compatibility matrix.
- Gates and outdoor doors 35-100 mm thick, with a gate frame wide enough for the mortice backset you choose.
- Gates you can reach over or through - a credential is needed on both sides, so a visitor can't let themselves in from inside.
- Short-stay rentals and shared entries - a code per guest that expires on its own, managed remotely once a G5 gateway is added - see gate locks in our platform guide.
- Staff and service entrances that need recurring codes, cards and entry records.
- Exit paths where people must get out without a credential - both handles are locked (double-sided locks and exit paths). Consider the single-sided H10S.
- Pool barrier gates - this lock is not sold as meeting pool-barrier requirements, which call for a compliant self-closing, self-latching gate (pool gates explained).
- Gates and doors thinner than 35 mm or thicker than 100 mm, or gate frames too narrow for the backset you need.
- Fire-rated doors - this lock has no fire rating.

Gate Fit, Mortice and Backset
Choose your mortice backset at checkout. The H10D mortice comes in backsets of 25, 28, 30, 35, 40, 45, 50 and 60 mm, measured from the edge of the gate to the centre of the handle; choose the one that suits the width of your gate frame - how to measure backset and what to do about a narrow gate post.
The 35 mm backset reference template (shared by the H10D and H10S) places the top fixing 156.5 mm above the handle centre and the bottom fixing 134 mm below, with a 22 mm cable hole 62.5 mm above the handle centre and an 18 x 190 mm mortice pocket. Adjust it to the backset you order - the template is for reference only. Its fixing positions differ from the FORGE H1 template, so the two are not interchangeable.
Case depths and the 240 x 22 mm faceplate are from the swing-door mortice size guide below.
- Gate frame width - the outside width of the frame section at the lock position, such as the face of the RHS. Not the overall width of the gate.
- Gate frame thickness - the outside depth of the section at the lock position, not the steel wall thickness. The H10D suits 35-100 mm.
- Closed gap at the latch - measure between the gate and the post with the gate shut. We recommend 10 mm or less; the latch projects 12 mm.
- Faceplate mounting - the mortice faceplate can sit flush in the edge of the gate or be surface-mounted. Allow 2 mm for a surface-mounted faceplate and 1.2 mm for the latch plate on the post; both close the gap the latch has to cross.
- the checklist - confirm the available mounting area, existing cut-outs, opening direction and installation clearances before ordering. Send us your measurements or a photo of the gate frame and we will check the backset with you.
Available Finish Options
Black
(This Product)
STK FEDLH10D
Silver
(This Product)
STK FEDLH10DS
Both finishes are the same lock - choose black or silver from the options on this page.
FORGE Outdoor Gate Smart Locks
This product is in bold. Capacities differ across the range: the H1, H10D and H10S store up to 100 fingerprints, 250 passcodes and 1,000 cards (the H1 figures are from its TTLock-version manual); the H1S stores 200, 150 and 200. The H1, H1S, H10D and H10S each come with a choice of mortice backsets, chosen at checkout.
Accessories and Spares
Other gateways and bridges are in the modules and Wi-Fi gateways category, and more cards and fobs in the RFID credentials range.
Battery and Emergency Power
The H10D runs on a rechargeable lithium battery behind a rubber-sealed cover on the inside handle. It is rated at 3,000 or more unlocks per charge. Charge it fully before fitting. When it runs low the lock says "low battery" as you unlock, with roughly 50 to 100 unlocks left - take the battery out and charge it (manual page 22). If the battery goes flat, open the gate with the mechanical key or power the lock through the USB-C port next to the keyhole under the outside handle. Use a USB-A to USB-C cable from a power bank - a USB-C to USB-C cable can make the power bank treat the lock as a fast-charge device and not supply power (manual page 22). More on what really affects battery life and power and battery FAQs.

Weather Rating - IP66 Inside and Out
The H10D is rated IP66 for exposed outdoor gates - powerful water jets, rain, sun and dust. The battery compartment is sealed with a rubber pad behind a metal cover. The rating does not cover extreme exposure such as driving rain, hail, constant salt spray, flooding or immersion, and we recommend a rain hood where the lock takes the weather head-on - the FORGE weather cover fits over the handle (non-warranty disclaimer). For the harshest sites, see the IP68 H100. On the coast, read coastal environments and what corrosion grades mean.
FORGE H10D - Technical Specifications
Dimensions
Installation
The H10D fits a mortice into the edge of the gate and clamps the two handles together through it, with a data cable running between them. The template is a guide to adjust to the backset you order, and the installation section of the manual runs through each step with drawings.
- Fit the mortice with the latch facing the closing direction - latch on top, deadbolt below. To reverse the latch, lift the flap, push the latch in and turn it 180 degrees (manual page 7).
- The handles point towards the hinge. To change handing, undo the two handle fixing screws, rotate the handle upwards only - turning it downwards can damage the fingerprint reader - and set the spindle-hub mark the same way as the handle (manual page 8).
- Cut the spindle so it stands 5 mm proud of the inside face of the gate (manual page 9; the spindle mistake in Chapter 12).
- Screw the waterproof cap onto the data-cable joint and tuck the spare cable into the gate frame before tightening the inside handle.
- Charge the battery fully before fitting it; push the rubber plug into the top screw hole when you are done.
- Afterwards check that both handles stay locked when pressed, lifting a handle throws the deadbolt, 123456# plus the handle unlocks, and the key turns the spindle (manual page 13; misalignment causes).
- Not sure about doing it yourself? See when to DIY and when to call an installer - Terry's offers installation across the Gold Coast.
Which way a gate is handed is explained in how to tell which way your door or gate opens.
Frequently Asked Questions
Not for everyday use. Fingerprint, PIN and card entry work with no phone at all, and the app works over Bluetooth within about 5-10 metres. Add the FORGE TTLock G5 gateway if you want to unlock, change codes or check records from away from home - what a gateway actually does.
It depends on the width of the gate frame where the lock goes - the handle has to sit on the frame and the mortice has to fit inside it. The H10D mortice comes in backsets from 25 to 60 mm, and you choose yours at checkout. Measure the outside face of the frame at the lock, its depth and the closed gap at the latch (we recommend 10 mm or less) - see Gate Fit and measuring your lock backset - or send us photos and we will check it.
Yes - it is a double-sided lock, so both handles stay locked and a fingerprint, code, card or the app is needed on either side. That stops someone reaching over the gate and letting themselves in. Passage Mode can leave it unlocked during set periods.
You get a voice warning first, with roughly 50 to 100 unlocks left. If it does go flat, use the mechanical key or connect a power bank to the USB-C port beside the keyhole under the outside handle with a USB-A to USB-C cable, then recharge the battery.
The H10D is rated IP66 inside and out for exposed outdoor gates. Its rating does not cover driving rain, hail, constant salt spray or immersion, and we recommend a rain hood - the FORGE weather cover - where the lock takes the weather head-on.
Additional Information
- Register an administrator straight away. Until the first administrator is added in the app, the default admin code is 123456 and any fingerprint will open the lock. A factory reset puts it back into that state.
- Choose the right backset at checkout. The mortice backset has to suit the gate frame - measure it as the Gate Fit section shows before you choose; the wrong one will not fit.
- Set the hub mark and cut the spindle. A spindle-hub mark pointing the wrong way, or a spindle left too long, is the usual reason a newly fitted gate lock will not lock.
- Keep the mechanical keys away from the gate - in the house or the car - so they are there if the battery fails (key storage ideas).
- Two handles, two locks in the app. The H10D's outside and inside handles are paired separately, so check each handle when you add or remove users.
Warranty
2-year FORGE warranty from the date of delivery - covers defects in materials and workmanship under normal use. Excludes improper installation or maintenance, misuse, accident, normal wear and tear (including fading or dulling of finishes) and water damage beyond the product's rated IP protection. Proof of purchase required for all claims. Returns & Warranty | FORGE warranty terms
Download PDF Resources
24-page manual (Version 1.2) - specifications and dimension drawing, installation including the template, handing (rotate upwards only) and the 5 mm spindle cut, the rechargeable battery, TTLock setup with the two handles as two locks, passcodes, fingerprints, cards and eKeys, gateway unlock, factory reset, emergency power and passage mode.
1:1 drilling template shared by the H10D and H10S - fixings 156.5 mm above and 134 mm below the handle centre, the cable and spindle holes and the 18 x 190 mm mortice pocket. Adjust it to the backset you order.
Two-page TTLock pairing sheet - download the app, register, then add the lock with your phone within 2 metres. It is the general TTLock pairing sequence, not written for one lock model.
FORGE H10D Double-Sided Gate Smart Lock - FAQ, Setup and Owner's Guide
Everything below is here to help you choose, fit, set up and live with the FORGE H10D. For general smart lock questions see our Smart Lock FAQ (Chapter 13), and for measuring and fitting the Buyer's Guide.
Choosing a FORGE Gate Lock
The H1 is double-sided, IP65 on both panels, runs on a 2,000 mAh rechargeable battery and comes in TTLock or TUYA versions. The H1S is the compact double-sided model, IP66, with a CR123 battery in each handle and a larger fingerprint store (200). The H10D is double-sided and IP66 with glass keypads and a rechargeable battery; the H10S is the same lock with a keypad on the outside only and free exit inside. The H100 is the FORGE IP68 model for the harshest sites, on Forge Smart (Tuya).
If anyone can reach over or through the gate to the inside handle, you need double-sided - otherwise a visitor can simply open it from inside. Single-sided suits gates and doors where the inside handle can't be reached from outside and people must be able to walk out without a code. The single-sided problem on gates explains it.
Gate Fit, Backset and Mortice
The H10D mortice comes in 25, 28, 30, 35, 40, 45, 50 and 60 mm backsets. Choose the one that suits the width of your gate frame at checkout - the Gate Fit section above shows how to measure.
No. The H10D and H10S share a template with fixings 156.5 mm above and 134 mm below the handle centre; the H1's are 164 mm and 100 mm. Use the H10 template for this lock.
39.30 mm wide (36.90 mm across the face) and 27.35 mm deep, or 63.00 mm including the lever.
Credentials and Access
Press the finger firmly on the sensor several times when prompted, moving it slightly each time so the lock captures different areas. Avoid wet fingers. Older people can have flatter fingerprints - register the same finger more than once. Children's fingerprints change as they grow, so update them every few months or give them a passcode.
A duress fingerprint. You register it like any other, but when it is used the administrator receives an alarm notification. It is meant for an emergency where someone is forcing you to open the gate, not for daily use.
Four: time-limited, one-time (it must be used within 6 hours of being created), permanent and recurring. Time-limited, permanent and recurring codes must be used once within 24 hours of their start time or the lock suspends them. Codes are generated by the app and can be customised afterwards (manual page 16; Chapter 14 - passcode types).
M1 (MIFARE 1K) cards, up to 1,000. Two come in the box, and extra FORGE MIFARE 1K cards are sold separately.
An eKey gives another TTLock account the right to unlock - time-limited, one-time, permanent or recurring - with options for remote unlock, an unlock link that works without the app, or near-administrator rights (TTLock eKeys).
The outside and inside handles are paired as two separate locks in TTLock - name them so you can tell them apart (for example "Front Gate - External" and "Front Gate - Internal").
Remote Access and the G5 Gateway
The FORGE TTLock G5 gateway links the lock's Bluetooth to your home Wi-Fi. TTLock with a gateway gives on-demand remote unlock, scheduled passage mode, Alexa and Google support (voice unlock is not recommended) and property-management integration, plus remote codes, eKeys and records.
Within reliable Bluetooth range of the gate, on a power point with good Wi-Fi coverage - brick, metal and distance shorten the range, and gates are often at the edge of the house's Wi-Fi. See gateway placement; the G5 is dual-band (the G5 in Chapter 08).
That Remote Unlock is switched on and authorised for that user, Power Saving Mode is off, and the gateway is online (manual page 20). If it keeps dropping out, see why smart locks drop off Wi-Fi.
Everything at the gate - fingerprint, code, card, Bluetooth app unlock and the key. Only the remote functions pause (gateways and internet outages).
Platform and Data
The H10D runs on TTLock - Bluetooth to your phone, with the TTLock G5 gateway for remote access. The H1 gate lock is also sold in a Forge Smart (Tuya) version with Wi-Fi built in, and the H100 runs on Forge Smart (Tuya), if you would rather a gate lock that needs no gateway. TTLock is run by Sciener, a Chinese company. Accounts outside China use TTLock's out-of-China servers; where that infrastructure is hosted, and which region Australian accounts use, is not published - in short, a Chinese company's servers, location unpublished. For the platform-by-platform picture see where each smart lock platform hosts its data, and for TTLock's security record see Chapter 14 - TTLock security.
Setup and Pairing
Install the free TTLock app
Out of the box the default admin code is 123456, and until an administrator is registered any fingerprint will open the lock. Register yourself as administrator as soon as the lock is fitted.
Power and Batteries
The rechargeable lithium battery is rated at 3,000 or more unlocks per charge. To recharge, remove the battery from the inside handle and charge it (manual page 22). Charge it fully before you first fit it.
The lock warns you when you unlock, with roughly 50 to 100 unlocks left - recharge the battery soon.
Use the mechanical key, or power the lock through the USB-C port next to the keyhole under the outside handle with a power bank and a USB-A to USB-C cable. A USB-C to USB-C cable may not work: the power bank can mistake the lock for a fast-charge device.
Installation
Usually one of two things: the spindle-hub orientation mark is pointing the wrong way, or the spindle is too long and rubs on the clutch. The mark must point the same way as the handle on both sides, and the spindle should stand 5 mm proud of the inside face.
Undo the two handle fixing screws, rotate the handle upwards only - downwards can damage the fingerprint reader - refit it, then set the spindle-hub mark the same way as the handle.
The latch always sits on top and the deadbolt below. Lift the flap on the mortice, push the latch in below the faceplate and turn it 180 degrees so it faces the closing direction.
A handy person with the right tools can - the manual covers the template, mortice, handles, spindle and battery step by step. On a narrow steel or aluminium gate frame an installer is usually quicker; Terry's offers installation across the Gold Coast.
Security, Lockout and Reset
After five wrong attempts in a row the lock stops responding for 90 seconds.
Delete the lock from your TTLock account - the app asks for your password - and the lock resets itself (manual page 21). A reset returns the lock to its factory state - default code 123456, any fingerprint opens - so register a new administrator straight away.
Away from the gate - in the house, the car or with a trusted neighbour - so they are there if the battery fails. A key safe works too.
Passage Mode and Everyday Use
In the app go to Settings, Passage Mode, switch it on and set a schedule. During the period, unlock the gate once by hand and it stays unlocked; when the period ends it locks itself.
Yes - the app keeps entry records, the last 300 operations; with a gateway (TTLock) you can check them from anywhere.
Weather and Outdoor Use
On any gate where the lock takes rain from above, yes. The FORGE weather cover is galvanised steel, fitted above the handle with silicone, and sold singly - a double-sided gate exposed on both sides needs two.
Salt spray is beyond what the rating covers, and fading, dulling or minor oxidation of the finish over time as normal ageing rather than a defect. Keep it out of direct salt spray and read coastal environments.
Warranty and Claims
A 2-year manufacturer warranty from the date of delivery, covering defects in materials and workmanship. Claims go through us - start with our Returns and Warranty page with your proof of purchase. Water damage beyond the IP66 rating and normal wear, including finish fading, are excluded.
Related Products, Guides and Chapters
FORGE gate locks: FORGE H1 (TTLock or TUYA) · FORGE H1S · FORGE H10D · FORGE H10S · FORGE H100 (IP68) · All FORGE smart locks
Accessories: FORGE TTLock G5 Gateway · FORGE TTLock Bluetooth Remote · FORGE Weather Cover for H1 · FORGE MIFARE 1K RFID Card
Buyer's Guide chapters: Ch 02 Measuring Your Door · Ch 03 Access Methods · Ch 04 Door Types · Ch 07 Airbnb and Short Stay · Ch 08 Gateways · Ch 10 Brand Profiles - FORGE · Ch 11 Standards and IP Ratings · Ch 12 Installation and Troubleshooting · Ch 13 Smart Lock FAQ · Ch 14 TTLock Platform Guide · Ch 15 App Platforms · Ch 16 Gates in the Mech-Digi Guide
Helpful blog reading: Which Smart Lock Platform - Gates · Why Double-Sided Locks Suit Gates · Gate Post Too Narrow? · Latch vs Bolt - Pool Gates · TTLock vs Tuya · G2, G3, G4 and G5 Gateways Compared · Mechanical Key Override · Passage Mode vs Holdback Mode · Site Survey and Installation
What's in the Box - FORGE H10D Double-Sided Gate Smart Lock
- Exterior (outside) lock handle x1
- Interior (inside) lock handle x1
- Mechanical keys x2
- IC (RFID) cards x2
- Installation accessories kit x1
- Mortice x1
- Latch plate x1
- Rechargeable lithium battery x1
- Cut-out template x1
- User manual x1
FORGE H10D Double-Sided Gate Smart Lock - Dimensions
FORGE H10D Double-Sided Gate Smart Lock - User Manual
The H10D manual (Version 1.2), page by page. The back-cover contact page is left out. Prefer the PDF? Download the manual.
PDF Files - FORGE H10D Double-Sided Gate Smart Lock
24-page manual (Version 1.2) - specifications and dimension drawing, installation including the template, handing (rotate upwards only) and the 5 mm spindle cut, the rechargeable battery, TTLock setup with the two handles as two locks, passcodes, fingerprints, cards and eKeys, gateway unlock, factory reset, emergency power and passage mode.
1:1 drilling template shared by the H10D and H10S - fixings 156.5 mm above and 134 mm below the handle centre, the cable and spindle holes and the 18 x 190 mm mortice pocket. Adjust it to the backset you order.
Two-page TTLock pairing sheet - download the app, register, then add the lock with your phone within 2 metres. It is the general TTLock pairing sequence, not written for one lock model.
FORGE H10D Double-Sided Gate Smart Lock - Product Gallery
FORGE Warranty
FORGE Electrical products sold by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries are covered by FORGE's 2-year warranty against defects. All warranty claims are lodged with us, and we liaise with FORGE on your behalf.
Warranty Summary
How to Make a Claim
- Notify us in writing within the 2-year warranty period, including your proof of purchase and a description of the fault.
- We will assess your claim with FORGE and advise the next steps. The product may need to be returned for assessment.
- Where the defect is covered, FORGE will repair or replace the product or faulty part at no charge.
Exclusions
The FORGE warranty does not cover:
- Improper installation, maintenance or operation, including not following FORGE's product specifications or instructions
- Normal wear and tear
- Misuse, abuse, negligence or accident
- Modification by anyone other than FORGE Electrical
- External causes such as natural disasters
- Damage from excessive rain, water ingress, flooding or other liquid exposure beyond the product's rated IP protection level
- Cosmetic ageing of outdoor finishes - light colour fading, surface dulling or minor oxidation from UV exposure, humidity and temperature changes
IP ratings on FORGE outdoor locks are intended for general outdoor conditions - rain, sun and dust. They do not guarantee performance under extreme exposure such as driving rain, hailstorms, constant salt spray, flooding or immersion.
Important Notes
In unusually harsh or exposed locations, FORGE strongly recommends fitting a rain cover or protective hood over the lock to shield it from direct weather and driving rain. If your product has been exposed to water, contact us for support.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The FORGE warranty is in addition to these rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:









