Auslock Smart Deadbolt T13B — Black
The Auslock T13B is a motorised smart deadbolt for residential timber entry doors. It delivers five access methods — fingerprint, PIN code, RFID card, Bluetooth app, and mechanical key override — in a compact 75 × 143 mm front panel weighing just 1.3 kg. A built-in door sensor monitors open/closed state, auto-lock and passage mode are configurable via the Auslock App, and optional remote access is available via the Auslock G2 or G3 Gateway.
The T13B suits doors from 40–90 mm thick — a wider range than most standard deadbolts. Opening direction is set in the Auslock App after pairing; no physical adjustment is needed. Note: the T13B has no USB-C emergency power port. The mechanical key is the only backup if batteries are fully flat — keep one outside the premises at all times.
We stock a range of digital smart deadbolts for different door constructions, backsets, and installation requirements.
View all smart deadbolt options
In-stock orders typically dispatch within 1–2 business days from our Gold Coast warehouse.
Key Features
- Five access methods — fingerprint, PIN code, RFID card, Bluetooth app, and mechanical key override
- Deadbolt lock type — motorised bolt throw; no handle or lever required on exterior
- Wide door thickness range — 40–90 mm suits thick timber entry doors
- Built-in door sensor — detects open/closed state; field-adjustable to suit different frame depths
- Opening direction set in app — configure left/right swing via the Auslock App after pairing; no physical adjustment needed
- Auto-lock and passage mode — configurable via the Auslock App
- High credential capacity — up to 200 fingerprints, 150 PIN codes, 200 RFID cards
- e-Key sharing — timed, permanent, one-time, or recurring digital keys via the Auslock App
- Google Assistant and Amazon Alexa voice control (gateway required)
- 4 × AA alkaline batteries — not included; alkaline only; low-battery alert below 4.8 V
- No USB-C emergency power port — mechanical key is the only battery-flat backup; keep one outside the premises
- Reset code is 0000# (four zeros) — different from all other Auslock models which use 000#
- Keypad lockout: 90 seconds after 5 wrong entries — shorter than other Auslock models (5 minutes)
Available Finish Options
Black
(This Product)
STK AUST13B-BLK
This product is available in Black only.
Access Methods
| Method | How It Works | Gateway Required? |
|---|---|---|
 Fingerprint |
Touch sensor — up to 200; permanent, timed, recurring. See fingerprint guidance. | No |
PIN Code |
Enter code + unlock button — up to 150; permanent, timed, one-time, recurring. See PIN guidance. | No |
 RFID Card / Tag |
Tap card or fob — up to 200; 3 RFID tags included; permanent or timed. | No |
 Bluetooth App |
Auslock App (iOS and Android) — local unlock within ~5 m; share e-keys, view history. | No |
 Remote App (Wi-Fi) |
Lock/unlock from anywhere; remote credential management. | Yes — G2 or G3 (sold separately) |
 Backup Key |
Mechanical override — 2 keys included. No USB emergency power on this model — the key is the only battery-flat backup. | No |
 Face Recognition |
Not supported on this model. | N/A |
What's in the Box
- Front panel assembly (touch keypad and fingerprint sensor) ×1
- Back panel assembly (interior thumb turn, battery compartment) ×1
- Deadbolt lock body ×1
- RFID key tags ×3; mechanical override keys ×2
- Waterproof rubber plates ×2
- Strike plate ×1; strike box ×1
- Installation drawing / template ×1
- PM3×8 round-headed screws ×3; PM2×3 round-headed screw ×1
- Mortice screws: M5×10 mm (aluminium door) ×4; M4×20 mm (timber door) ×4
- Screw stubs and fixing hardware (assorted M5 and M6 screws)
- User manual
Suitable Uses
Full Specifications
| Specification | Detail |
|---|---|
| Model | Auslock Smart Deadbolt T13B |
| SKU | STK AUST13B-BLK |
| Lock type | Motorised smart deadbolt |
| Material | Aluminium alloy |
| Finish | Black |
| Front panel | 75 mm W × 143 mm H |
| Back panel | 75.6 mm W × 153.6 mm H; depth 33 mm |
| Deadbolt body width | 74.2 mm |
| Door thickness | 40–90 mm. See door thickness guide. |
| Door types | Timber doors (see aluminium note above) |
| Backset | 60 mm. See backset explained. |
| Lock weight | 1.3 kg |
| Fingerprint capacity | Up to 200 |
| PIN capacity | Up to 150 |
| RFID card capacity | Up to 200 |
| Wrong PIN lockout | 5 consecutive wrong entries; keypad locked 90 seconds (not 5 minutes); other credentials unaffected |
| Connectivity | Bluetooth (local); Wi-Fi via Auslock G2 or G3 Gateway (sold separately, 2.4 GHz) |
| App platform | Auslock App (iOS and Android) — not TTLock, not Tuya |
| Voice control | Amazon Alexa, Google Assistant (requires gateway) |
| Door sensor | Built-in; field-adjustable; required for auto-lock and door status monitoring |
| IP rating | IP55 (external panel). See IP ratings explained. |
| Power | 4 × AA alkaline batteries (not included); low-battery alert below 4.8 V; alkaline only |
| Emergency power | None — no USB-C port; mechanical key is the only battery-flat backup |
| Reset procedure | Hold Reset button 5 s, then enter 0000# (four zeros — different from other Auslock models) |
| Operating temperature | -10 °C to 55 °C |
| Operating humidity | 0–95% |
| Certifications | CE, FCC, RoHS |
| Fire rating | None |
| Warranty | 12 months |
Dimensions
Battery, Power & Backup
The T13B runs on 4 × AA alkaline batteries — not included. Alkaline only — lithium and rechargeable batteries must not be used. The low-battery alert fires below 4.8 V. Replace all four batteries together when notified; complete the installation fully before inserting batteries, with the door open.
Remote App Access & Gateway
The T13B connects to the Auslock App via Bluetooth for local control within approximately 5 m. For remote access from anywhere — locking, unlocking, viewing history, managing credentials, and enabling voice control — an Auslock Gateway is required within ~12 m of the lock.
Auslock App
The T13B uses the Auslock App, available on iOS and Android. This is Auslock's own proprietary platform — not TTLock, not Tuya. The app supports multiple admin levels, e-key sharing, named access codes, scheduled and recurring codes, activity logs, and remote access when a gateway is connected.
Frequently Asked Questions
After pairing the T13B to the Auslock App, set the door opening direction (left or right) in app settings before using the lock. If the bolt throws the wrong way, check that the opening direction setting matches your door. This is a one-time app setup step — unlike lever-style locks, there is no physical handle to adjust.
Permanent passcodes must be tested within 24 hours of creation, otherwise they auto-expire as a security measure. Create the code, test it from the keypad immediately, and it will remain active indefinitely.
Replace all four AA batteries with fresh brand-name alkaline cells first. Then test with the door open — if the bolt throws correctly open, the issue is strike plate alignment when the door is closed. Even 1–2 mm of door sag can prevent the bolt from retracting cleanly. See Chapter 12 — misalignment.
Open the back panel battery cover. Hold the Reset button for 5 seconds. When prompted, enter 0000# on the keypad — that is four zeros, then the # key. The T13B uses four zeros; all other Auslock models use three (000#). All users, codes, cards, and fingerprints are removed. Re-add the lock to the Auslock App as admin. Always reset with the door open.
Five consecutive wrong entries lock the keypad for 90 seconds. This is shorter than the 5-minute lockout on other Auslock models. All other access methods — fingerprint, RFID, Bluetooth app, and mechanical key — continue to work during the lockout period.
Additional Information
When fitting the exterior assembly, keep the cylinder rod (spindle) horizontal. Incorrect orientation will prevent the deadbolt motor from engaging correctly after installation. If the bolt does not operate after fitting, remove the exterior panel and check the cylinder rod position before assuming a fault.
After mechanical installation, loosen the rear panel screws and push the door sensor towards the door frame until it is within sensing distance of the magnet, then retighten. Correct sensor alignment is required for auto-lock and door status monitoring to function accurately.
Register each fingerprint while standing beside the lock with the Auslock App open. Enrol the same finger at 2–3 slightly different angles to improve recognition reliability. Add a second finger as backup. For fingerprint troubleshooting see Chapter 03 — fingerprint access.
The T13B uses the Auslock App — a distinct platform from TTLock or Tuya. If you need PMS integration or inter-brand compatibility, this is not the right product. Chapter 15 — Choosing an App Platform explains the distinction.
Warranty
12 months from date of sale covering defects in materials and electronic components under normal residential use. Does not cover misuse, improper installation, or vandalism. Terry's Locksmiths manages all Auslock warranty claims — contact us first and we'll handle it from there. This warranty operates alongside your rights under Australian Consumer Law.
PDF Downloads
Auslock Smart Deadbolt T13B User Manual (PDF)
Auslock App User Manual (PDF)
Auslock Alexa Setup Guide (PDF)
Auslock Google Home Setup Guide (PDF)
Auslock 2026 Product Catalogue (PDF)
For all resources visit the Auslock PDF Resources page.
What's in the Box — Auslock Smart Deadbolt T13B
- Front panel assembly (touch keypad and fingerprint sensor) ×1
- Back panel assembly (interior thumb turn, battery compartment) ×1
- Deadbolt lock body ×1
- RFID key tags ×3; mechanical override keys ×2
- Waterproof rubber plates ×2
- Strike plate ×1; strike box ×1
- Installation drawing / template ×1; user manual ×1
- PM3×8 round-headed screws ×3; PM2×3 round-headed screw ×1
- Mortice screws: M5×10 mm (aluminium door) ×4; M4×20 mm (timber door) ×4
- Screw stubs and fixing hardware (assorted M5 and M6 screws)
Auslock Smart Deadbolt T13B — Real Installations
Auslock Smart Deadbolt T13B — Dimensions
Auslock Smart Deadbolt T13B — User Manual
Auslock Warranty
All Auslock products purchased through Terry's Tradies Pty Ltd (trading as Terry's Gold Coast Smart Locks and its associated websites and subsidiaries) are backed by a 12-month limited manufacturer's warranty. If something isn't right, contact us first — we manage all warranty assessments on your behalf and will work with you to get it resolved.
Warranty Summary
How to Make a Claim
- Contact Terry's Tradies Pty Ltd at your original place of purchase with a description of the fault.
- Have your proof of purchase ready (receipt or order confirmation).
- Provide clear photos and/or video of the defect — this is required before any assessment can begin.
- We may ask you to complete troubleshooting steps or a technical support form before the item is returned. Do not send the product back without our written approval.
- If the claim is approved, we will arrange the next steps with you directly — including return freight where applicable.
What the Warranty Doesn't Cover
The following are not covered under the Auslock manufacturer's warranty:
- Incorrect or improper installation
- Door or frame misalignment
- Incorrect mortise, latch, or backset selection
- Installation on doors outside the product's specifications
- Environmental exposure beyond the product's stated IP rating
- Water ingress not consistent with the product's IP rating
- Power surge, fire, flood, lightning, or other natural disaster
- Cosmetic damage or normal wear and tear
- Battery misuse or leakage
- Forced entry, vandalism, or tampering
- Unauthorised modification
- Use of non-Auslock components
- Commercial or high-traffic use (unless approved in writing)
Rechargeable battery products (Models A01, A02, A03, A519, A619): Battery-related damage is excluded where a non-certified charger, fast charger, incorrect voltage (outside 5.2V / 2A), third-party battery, or unsuitable charging environment has been used.
Change-of-Mind Returns
Change-of-mind returns are accepted at our discretion and subject to the manufacturer's return conditions. If you've changed your mind, contact us within 14 days of receiving your order and we'll let you know if a return is possible and what applies.
To be eligible, products must be:
- Unused and uninstalled
- Not powered on, activated, paired, programmed, or configured in any way
- In original, fully sealed condition with all packaging, accessories, and components
Where a return is approved, a 20% restocking fee applies and return shipping is at your cost. Products that have been installed, powered on, or had any credentials registered are not eligible for return.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law (ACL). You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure. Nothing in this policy limits or excludes your rights under the ACL.
It can be overwhelming with all the choices out there. We can help! We are experts with decades of experience in fitting locks of all types, not just Smart Locks. It is a free service we offer, and with just some photos and a few minutes of your time you can get expert advice and product recommendations tailored precisely to suit your needs.
Click on the image below to begin your expert Smart Lock consultation
