Wolflok WFK001FK XL Security Screws & Wall Plugs
The Wolflok WFK001FK XL Security Screws & Wall Plugs are the official XL security screws and wall plugs for the Wolflok Pro (960071). Four 100mm screws and four matching wall plugs achieve LPS1175 Issue 8 B1 security certification - a higher rating than the standard A10 kit - when the Wolflok Pro is mounted on brick, concrete, stone, or rendered walls (render up to 20mm deep). It is also the fixing Wolflok specifies for the standard Wolflok (960064) on rendered walls.
The WFK001FK is included in every Wolflok Pro box alongside the standard WFK311 screws. Both kits are in the box so the installer can choose the appropriate fixing for the substrate. If you need a replacement set, or if you are relocating your Wolflok Pro and want to reinstall to the B1 standard, the WFK001FK is the correct part to order.
Estimated Dispatch
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- Achieves LPS1175 Issue 8 B1 security rating - higher than A10 - on brick, concrete, stone, and rendered walls (on the Wolflok Pro)
- 4 x 100mm heavy-duty screws with 4 x matching wall plugs
- The only fixing kit that achieves B1 certification on rendered walls (render up to 20mm deep)
- Supplied as standard with every Wolflok Pro (960071) - this listing is for replacement sets
- Also the rendered-wall fixing Wolflok specifies for the standard Wolflok (960064)
- Single-use design - screws must not be reused after removal
- Not recommended for single-skin walls (may cause damage) - use WFK311 standard screws instead
- Not suitable for wood installations
- T30 Torx drive; a ratchet or power tool may be used with care for driving, with the final tightening done by hand
What's in the Box
Drill bits and a driver are not included - see the tools listed under Specifications.
Suitable Uses
- Replacing or upgrading to the B1-certified fixing kit when reinstalling a Wolflok Pro
- Installing the Wolflok Pro on a rendered masonry wall (render up to 20mm deep) where B1 certification is required
- Fitting the standard Wolflok (960064) to a rendered masonry wall (render up to 20mm deep)
- Commercial, security service, or facilities management applications requiring the highest available LPS1175 fixing certification
- Properties where the wall substrate is too thick or dense for 60mm self-tapping screws to achieve adequate pull-out strength
Wolflok Fixing Kit Range
This product is the bold row. Before drilling, review the common installation mistakes that can void certification.
Specifications
Frequently Asked Questions
What is the difference between A10 and B1, and why does it matter?
Both are LPS1175 Issue 8 security ratings from the Loss Prevention Certification Board (LPCB). B1 is a higher rating than A10 - it requires the product to resist a sustained attack for a longer duration using tools commonly carried by intruders. For most residential applications A10 (WFK311 screws) is sufficient. For commercial, security service, or high-risk applications, the B1 rating achieved with WFK001FK on the Wolflok Pro provides a stronger level of certified protection.
Both are LPS1175 Issue 8 security ratings from the Loss Prevention Certification Board (LPCB). B1 is a higher rating than A10 - it requires the product to resist a sustained attack for a longer duration using tools commonly carried by intruders. For most residential applications A10 (WFK311 screws) is sufficient. For commercial, security service, or high-risk applications, the B1 rating achieved with WFK001FK on the Wolflok Pro provides a stronger level of certified protection.
Can I use the WFK001FK on a single-skin wall?
No. The WFK001FK XL screws and wall plugs may cause structural damage to single-skin walls. For single-skin walls use the WFK311 Standard Security Screws instead, which achieve A10 on single-skin substrates.
No. The WFK001FK XL screws and wall plugs may cause structural damage to single-skin walls. For single-skin walls use the WFK311 Standard Security Screws instead, which achieve A10 on single-skin substrates.
My wall is rendered - which screws do I need?
For rendered masonry with render up to 20mm deep, the WFK001FK (this product) is the correct kit and achieves B1 certification on the Wolflok Pro. It is also the kit Wolflok specifies for mounting the standard Wolflok on render. The WFK311 standard screws are not recommended for rendered surfaces. Confirm the render depth before purchasing - if render exceeds 20mm, contact Gold Coast Smart Locks for advice.
For rendered masonry with render up to 20mm deep, the WFK001FK (this product) is the correct kit and achieves B1 certification on the Wolflok Pro. It is also the kit Wolflok specifies for mounting the standard Wolflok on render. The WFK311 standard screws are not recommended for rendered surfaces. Confirm the render depth before purchasing - if render exceeds 20mm, contact Gold Coast Smart Locks for advice.
Is the WFK001FK included in the Wolflok Pro box?
Yes. Every Wolflok Pro (960071) ships with both the WFK311 standard screws (A10) and the WFK001FK XL screws and wall plugs (B1). This listing is for replacement sets when the original kit is exhausted or lost, and for fitting the standard Wolflok to render.
Yes. Every Wolflok Pro (960071) ships with both the WFK311 standard screws (A10) and the WFK001FK XL screws and wall plugs (B1). This listing is for replacement sets when the original kit is exhausted or lost, and for fitting the standard Wolflok to render.
What tools do I need for WFK001FK installation?
A 4mm masonry drill bit at least 110mm long for pilot holes, an 8mm masonry drill bit at least 110mm long for the wall plug holes, a T30 Torx screwdriver, a hammer to press wall plugs flush, and a standard drill. The AP003 Fitting Pack (8mm masonry bit + 4mm masonry pilot bit + T30 Torx bit) is Wolflok's spare kit for this job.
A 4mm masonry drill bit at least 110mm long for pilot holes, an 8mm masonry drill bit at least 110mm long for the wall plug holes, a T30 Torx screwdriver, a hammer to press wall plugs flush, and a standard drill. The AP003 Fitting Pack (8mm masonry bit + 4mm masonry pilot bit + T30 Torx bit) is Wolflok's spare kit for this job.
Additional Information
Installation Rules That Affect the B1 Security Rating
LPS1175 B1 requires strict compliance with the Wolflok Pro installation instructions. Key rules: drill into the brick face, never into mortar; maintain a minimum of 150mm from any edge or corner; the unit must sit flat to the wall; for cavity walls, check for pipes, cables, and insulation before drilling the 8mm holes; use the supplied paper marking template rather than the unit itself as a guide; drill 4mm pilot holes first, then open them out with the 8mm bit to 110mm deep; press wall plugs flush before driving screws. A ratchet or power tool can drive the screws with care, but do the final tightening by hand. If you are unsure whether DIY installation is appropriate for your wall type, see our guide to when DIY installation is appropriate or ask us about advice and installation.
LPS1175 B1 requires strict compliance with the Wolflok Pro installation instructions. Key rules: drill into the brick face, never into mortar; maintain a minimum of 150mm from any edge or corner; the unit must sit flat to the wall; for cavity walls, check for pipes, cables, and insulation before drilling the 8mm holes; use the supplied paper marking template rather than the unit itself as a guide; drill 4mm pilot holes first, then open them out with the 8mm bit to 110mm deep; press wall plugs flush before driving screws. A ratchet or power tool can drive the screws with care, but do the final tightening by hand. If you are unsure whether DIY installation is appropriate for your wall type, see our guide to when DIY installation is appropriate or ask us about advice and installation.
Screws Are Single-Use
Like the standard WFK311 screws, the WFK001FK screws are single-use. Do not reuse them after removal. A fresh set is required any time the Wolflok Pro is relocated or reinstalled. Reusing screws compromises pull-out resistance and cannot maintain the LPS1175 B1 rating.
Like the standard WFK311 screws, the WFK001FK screws are single-use. Do not reuse them after removal. A fresh set is required any time the Wolflok Pro is relocated or reinstalled. Reusing screws compromises pull-out resistance and cannot maintain the LPS1175 B1 rating.
Using the WFK001FK on the Standard Wolflok
Wolflok's datasheet and range brochure for the standard Wolflok (960064) specify the WFK001FK for rendered walls (render up to 20mm), and list it as a spare for that model. The B1 rating itself belongs to the Wolflok Pro - the standard Wolflok is an A10-rated key safe whichever kit fixes it.
Wolflok's datasheet and range brochure for the standard Wolflok (960064) specify the WFK001FK for rendered walls (render up to 20mm), and list it as a spare for that model. The B1 rating itself belongs to the Wolflok Pro - the standard Wolflok is an A10-rated key safe whichever kit fixes it.
About the Wolflok Key Safe Range
For an overview of how mechanical key safes work and guidance on installation best practice, see our guide: how a mechanical key lock box works, and browse the Key Storage range.
For an overview of how mechanical key safes work and guidance on installation best practice, see our guide: how a mechanical key lock box works, and browse the Key Storage range.
Warranty
Warranty
2-year warranty as standard on the full product including the illumination module. Register for free at wolflok.com/product-registration (Australia supported) to extend to 5 years on mechanical parts. Batteries are user-replaceable and not covered. Proof of purchase required for all claims. Returns & Warranty
2-year warranty as standard on the full product including the illumination module. Register for free at wolflok.com/product-registration (Australia supported) to extend to 5 years on mechanical parts. Batteries are user-replaceable and not covered. Proof of purchase required for all claims. Returns & Warranty
Download PDF Resources
Wolflok Pro Instruction Manual (PDF)
Manual for the Wolflok Pro, the key safe this kit is supplied with - B1 installation with the XL screws and wall plugs step by step (pages 18-22), cavity-wall checks and the spare-parts list (page 33).
Manual for the Wolflok Pro, the key safe this kit is supplied with - B1 installation with the XL screws and wall plugs step by step (pages 18-22), cavity-wall checks and the spare-parts list (page 33).
Wolflok Pro Datasheet (PDF)
Specification sheet for the Wolflok Pro, the key safe this kit fits - LPS1175 Issue 8 B1 with the WFK001FK and A10 with the WFK311, plus the spare-parts ordering table.
Specification sheet for the Wolflok Pro, the key safe this kit fits - LPS1175 Issue 8 B1 with the WFK001FK and A10 with the WFK311, plus the spare-parts ordering table.
Wolflok Datasheet (PDF)
Specification sheet for the standard Wolflok (960064) - names the WFK001FK as the fixing for rendered walls up to 20mm and lists it as a spare.
Specification sheet for the standard Wolflok (960064) - names the WFK001FK as the fixing for rendered walls up to 20mm and lists it as a spare.
Wolflok Instruction Manual (PDF)
Manual for the standard Wolflok (960064) - installation safety rules (150mm from corners, brick face not mortar, never reuse screws) and the standard key safe's spare parts.
Manual for the standard Wolflok (960064) - installation safety rules (150mm from corners, brick face not mortar, never reuse screws) and the standard key safe's spare parts.
Wolflok Range Brochure (PDF)
Brochure for the Wolflok and Wolflok Pro key safes this kit fits - both specification panels with their spare-parts ordering tables and a range comparison.
Brochure for the Wolflok and Wolflok Pro key safes this kit fits - both specification panels with their spare-parts ordering tables and a range comparison.
PDF Files - Wolflok WFK001FK XL Security Screws & Wall Plugs
Wolflok Pro Instruction Manual (PDF)
Manual for the Wolflok Pro, the key safe this kit is supplied with - B1 installation with the XL screws and wall plugs step by step (pages 18-22), cavity-wall checks and the spare-parts list (page 33).
Manual for the Wolflok Pro, the key safe this kit is supplied with - B1 installation with the XL screws and wall plugs step by step (pages 18-22), cavity-wall checks and the spare-parts list (page 33).
Wolflok Pro Datasheet (PDF)
Specification sheet for the Wolflok Pro, the key safe this kit fits - LPS1175 Issue 8 B1 with the WFK001FK and A10 with the WFK311, plus the spare-parts ordering table.
Specification sheet for the Wolflok Pro, the key safe this kit fits - LPS1175 Issue 8 B1 with the WFK001FK and A10 with the WFK311, plus the spare-parts ordering table.
Wolflok Datasheet (PDF)
Specification sheet for the standard Wolflok (960064) - names the WFK001FK as the fixing for rendered walls up to 20mm and lists it as a spare.
Specification sheet for the standard Wolflok (960064) - names the WFK001FK as the fixing for rendered walls up to 20mm and lists it as a spare.
Wolflok Instruction Manual (PDF)
Manual for the standard Wolflok (960064) - installation safety rules (150mm from corners, brick face not mortar, never reuse screws) and the standard key safe's spare parts.
Manual for the standard Wolflok (960064) - installation safety rules (150mm from corners, brick face not mortar, never reuse screws) and the standard key safe's spare parts.
Wolflok Range Brochure (PDF)
Brochure for the Wolflok and Wolflok Pro key safes this kit fits - both specification panels with their spare-parts ordering tables and a range comparison.
Brochure for the Wolflok and Wolflok Pro key safes this kit fits - both specification panels with their spare-parts ordering tables and a range comparison.
Wolflok Warranty
Warranty Summary
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries (trading as Gold Coast Smart Locks) in the first instance - do not contact the manufacturer directly for warranty claims.
- Have your proof of purchase ready (order confirmation or receipt).
- Describe the fault clearly, including the product model (Wolflok or Wolflok Pro) and when the issue first appeared.
- If directed to return the product, ensure it is securely packaged. Do not attempt disassembly - this may void the warranty.
Extend Your Warranty to 5 Years - Free Registration
It's worth taking 2 minutes to register your Wolflok.
Registering extends the mechanical parts warranty from 2 years to 5 years at no cost. The registration form at wolflok.com/product-registration is set up for Australian buyers - just select Australia as your country, enter your product model and date of purchase, and you're done. No registration deadline is stated, so you can register at any time after purchase.
Note: The 5-year extension applies to mechanical parts only. The illumination module remains covered for 2 years regardless of registration, and batteries are excluded from all warranty coverage.
Registering extends the mechanical parts warranty from 2 years to 5 years at no cost. The registration form at wolflok.com/product-registration is set up for Australian buyers - just select Australia as your country, enter your product model and date of purchase, and you're done. No registration deadline is stated, so you can register at any time after purchase.
Note: The 5-year extension applies to mechanical parts only. The illumination module remains covered for 2 years regardless of registration, and batteries are excluded from all warranty coverage.
Exclusions
The following are not covered under the Wolflok warranty:
- Damage caused by modification of the product - any modification voids warranty
- Damage resulting from installation not carried out in accordance with the supplied instructions (including use of incorrect fixings or surface types)
- Damage caused by misuse, abuse, or neglect
- Normal wear and tear
- Batteries (user-replaceable consumables)
- The illumination module beyond 2 years (not covered under the 5-year extended registration)
- Damage caused by conditions beyond the product's rated operating range
Important Notes
Correct installation is required to maintain warranty coverage.
The product must be installed and used as described in the supplied instruction manual. Security accreditation (LPS 1175) may also be invalidated if incorrect fixings or surface types are used. Do not reuse screws if reinstalling - contact your supplier for replacement fixings.
No master or reset code exists. Wolflok key lock boxes have no master or reset code function. Lost codes cannot be recovered by the manufacturer, distributor, or retailer.
The product must be installed and used as described in the supplied instruction manual. Security accreditation (LPS 1175) may also be invalidated if incorrect fixings or surface types are used. Do not reuse screws if reinstalling - contact your supplier for replacement fixings.
No master or reset code exists. Wolflok key lock boxes have no master or reset code function. Lost codes cannot be recovered by the manufacturer, distributor, or retailer.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
