Borg BL2701SCECP Mechanical Digital Lock - Satin Chrome - EasiCode Pro with Key Override
At A Glance
At A Glance
POWERNone - Fully Mechanical
DISPATCHSame Day Before 11am
PIN Code 
Mechanical KeyThe Borg BL2701SCECP is a fully mechanical digital lock from the Borg BL2700 ECP series - Borg's direct upgrade to the standard BL2000 ECP series, with a key override cylinder built into the keypad itself rather than needing a separate lockcase fitted. No batteries, no mains power and no electronics are involved anywhere in the mechanism - every function is driven by the physical action of the keypad buttons. The lock accepts a single PIN code selected from over 4,000 possible combinations, with Borg's EasiCode Pro system giving on-door code changing without tools or removing the lock, in around 10 seconds.
The BL2701SCECP includes a Yale/Schlage 6-pin removable mechanical key override cylinder as standard, giving keyway backup entry when needed. The body is finished in satin chrome, uses a standard 60mm backset (50mm/70mm also offered across the wider BL2700 ECP range), and is reversible for left-hand or right-hand door installation. A removable holdback function is included, letting the inside handle be held open where free passage is required.
Cycle tested to 50,000 operations, the BL2701SCECP is rated for internal light to medium use - residential entry doors, office access points, secure storage rooms, and similar low-traffic applications. It is one of five models in the Borg BL2700/BL2000 ECP family - if your door has a narrow stile or aluminium frame that a standard 60mm lock will not fit, see the short-backset BL2702SCECP instead.
Estimated Warehouse Dispatch
Usually same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Usually same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Fully Mechanical - No Batteries Required
Every function - keypad entry, code change, key override - is driven by the physical action of the keypad and key. There is nothing to charge, no batteries to replace, and no electronics to fail.
Every function - keypad entry, code change, key override - is driven by the physical action of the keypad and key. There is nothing to charge, no batteries to replace, and no electronics to fail.
EasiCode Pro - On-Door Code Change
The access code is changed directly on the installed lock in around 10 seconds, using the dedicated code-change button and supplied block pin - no tools, no lock removal, no programming device. See our guide on changing codes on Borg EasiCode Pro locks, or read more on what MG Pro and ECP actually mean on a Borg lock.
The access code is changed directly on the installed lock in around 10 seconds, using the dedicated code-change button and supplied block pin - no tools, no lock removal, no programming device. See our guide on changing codes on Borg EasiCode Pro locks, or read more on what MG Pro and ECP actually mean on a Borg lock.
Mechanical Key Override Included
Supplied with a Yale/Schlage 6-pin removable cylinder and 3 keys. Keyed-alike ordering is available across multiple BL2701SCECP units, so one key operates every keypad on the order - contact Terry's when placing your order to specify keyed-alike. The cylinder can also be swapped for a compatible Yale/Schlage-profile master keyed cylinder for site keying integration - confirm suitability with your locksmith before ordering a replacement.
Supplied with a Yale/Schlage 6-pin removable cylinder and 3 keys. Keyed-alike ordering is available across multiple BL2701SCECP units, so one key operates every keypad on the order - contact Terry's when placing your order to specify keyed-alike. The cylinder can also be swapped for a compatible Yale/Schlage-profile master keyed cylinder for site keying integration - confirm suitability with your locksmith before ordering a replacement.
Light to Medium Use - Not for High Traffic Commercial Doors
The BL2701SCECP is built for internal residential and light commercial doors. For high-traffic commercial or heavy-duty applications, consider the Lockwood 3572DX, Borg BL7701 Heavy Duty, or Carbine CDL7100SC-HD. See our guide on heavy duty commercial mechanical digital locks for the full comparison.
The BL2701SCECP is built for internal residential and light commercial doors. For high-traffic commercial or heavy-duty applications, consider the Lockwood 3572DX, Borg BL7701 Heavy Duty, or Carbine CDL7100SC-HD. See our guide on heavy duty commercial mechanical digital locks for the full comparison.
Key Features
- Fully mechanical operation - no batteries, electronics, or mains power required.
- EasiCode Pro on-door code change - the code is updated while the lock stays installed, no tools required.
- Yale/Schlage 6-pin removable key override cylinder and 3 keys included as standard.
- Over 4,000 unique PIN code combinations - single active code at any time.
- 14-button keypad: 12 coded buttons, 1 clear button, and 1 dedicated EasiCode Pro code-change button.
- Anti-thrust deadlocking latch - automatically deadlocks when the door closes, resisting forced latch retraction.
- Fixed 60mm backset; 12.5mm latch bolt projection.
- Free-turning inside knob - always allows immediate egress without entering a code.
- Code change block pin included - can be fitted to disable the external code-change function entirely.
- Removable holdback function - inside handle can be held open for free passage.
- Reversible for left-hand or right-hand door installation.
- Cycle tested to 50,000 operations.
- Cast housing and knob construction with stainless steel buttons; satin chrome finish.
- Suits internal doors up to 60mm thick on standard fixings, or up to 85mm with the XL fixing kit (Part No. S227).
- Backed by Borg's 12-month warranty, alongside your rights under Australian Consumer Law.
Access Methods
What's in the Box
- 1 x BL2701 mechanical digital keypad assembly (external)
- 1 x inside knob assembly with holdback paddle handle
- 1 x Yale/Schlage 6-pin removable key override cylinder
- 3 x keys for key override cylinder
- 1 x 60mm deadlocking tubular latch assembly
- 1 x strike plate
- 1 x EasiCode Pro on-door code change mechanism
- 1 x code change block pin (used during code change; can also disable external code change function)
- 1 x set of fixings, including one 120mm sprung spindle
- 1 x installation instructions
Suitable Uses
- Residential front and rear entry doors needing PIN access control without electrical infrastructure
- Internal office doors and meeting rooms needing restricted access
- Secure storage rooms, server rooms, and utility areas
- Strata and apartment doors where battery maintenance is impractical
- Rental properties where codes must be changed on-site between tenancies
- Light commercial access points needing a backup mechanical key override
Available Finish Options
Satin Chrome
(This Product)
STK BL2701SCECP
Marine Grade Pro Black
STK BL2701MGPRO
Finish selection does not affect functionality, compliance, or performance. The Marine Grade Pro Black variant is a separate listing (BL2701MGPRO) with an upgraded marine-grade coating - see Item Code Family.
BL2000 / BL2700 ECP Series - Item Code Family
All models below share the same EasiCode Pro on-door code-change system and 2000-platform keypad. They differ in latch/bolt type, key override, and holdback.
Looking at a gate rather than a door? See the purpose-built Digital Mechanical Locks range, including Borg's dedicated gate lock series.
Accessories and Spares
No separate spare external keypad unit is currently catalogued for the BL2701SCECP - the closest replacement path is the complete external keypad assembly. Contact Terry's if you need a keypad-only spare and we will confirm current availability.
Full Specifications
Dimensions
Manufacturer dimensional drawing for the Borg BL2701SCECP. Refer to the drawing for keypad body and inside handle assembly measurements.
Latch dimensional drawing - 60mm fixed backset deadlocking tubular latch with 12.5mm bolt projection.
Frequently Asked Questions
Does this lock need batteries or mains power to operate?
No. The BL2701SCECP is a fully mechanical digital lock. All internal mechanisms are driven by the physical action of the keypad buttons - no electricity, batteries, or wiring are involved at any point. For a broader overview of how battery-free Borg locks sit within the smart lock category, see Lockwood vs Borg vs Carbine.
No. The BL2701SCECP is a fully mechanical digital lock. All internal mechanisms are driven by the physical action of the keypad buttons - no electricity, batteries, or wiring are involved at any point. For a broader overview of how battery-free Borg locks sit within the smart lock category, see Lockwood vs Borg vs Carbine.
How do I change the code using EasiCode Pro?
The code is changed directly on the installed lock using the dedicated EasiCode Pro button and the supplied code change block pin - the process takes around 10 seconds and does not require removing the lock or using specialist tools. Full step-by-step instructions are in the BL2000 ECP EasiCode Pro Installation Instructions, or see our guide on changing codes on Borg EasiCode Pro locks.
The code is changed directly on the installed lock using the dedicated EasiCode Pro button and the supplied code change block pin - the process takes around 10 seconds and does not require removing the lock or using specialist tools. Full step-by-step instructions are in the BL2000 ECP EasiCode Pro Installation Instructions, or see our guide on changing codes on Borg EasiCode Pro locks.
Can multiple locks be ordered keyed alike, or with a master keyed cylinder?
Yes to both. Keyed-alike ordering is available across multiple BL2701SCECP units, so a single key operates every keypad on the order - specify this when placing your order. The supplied Yale/Schlage 6-pin removable cylinder can also be swapped for a compatible Yale/Schlage-profile master keyed cylinder if you need to integrate it into an existing site keying system - confirm compatibility with your locksmith before ordering a replacement, since not all Yale/Schlage-profile cylinders fit without modification.
Yes to both. Keyed-alike ordering is available across multiple BL2701SCECP units, so a single key operates every keypad on the order - specify this when placing your order. The supplied Yale/Schlage 6-pin removable cylinder can also be swapped for a compatible Yale/Schlage-profile master keyed cylinder if you need to integrate it into an existing site keying system - confirm compatibility with your locksmith before ordering a replacement, since not all Yale/Schlage-profile cylinders fit without modification.
Is the BL2701SCECP reversible for left-hand or right-hand doors?
Yes. Unlike the short-backset BL2702SCECP's handed 28mm ali-latch, the BL2701SCECP's standard 60mm tubular latch is a drop-in reversible design - no handing-change procedure or LH/RH ordering is needed.
Yes. Unlike the short-backset BL2702SCECP's handed 28mm ali-latch, the BL2701SCECP's standard 60mm tubular latch is a drop-in reversible design - no handing-change procedure or LH/RH ordering is needed.
Is the BL2701SCECP suitable for external or weathered door positions?
No. The BL2700 ECP series is rated for internal light to medium duty use only - it is not designed for prolonged external weathering, coastal salt air, or high-humidity environments. For external applications, contact Terry's for guidance on suitable weather-rated alternatives.
No. The BL2700 ECP series is rated for internal light to medium duty use only - it is not designed for prolonged external weathering, coastal salt air, or high-humidity environments. For external applications, contact Terry's for guidance on suitable weather-rated alternatives.
Additional Information
EasiCode Pro - How the Code Change Works
EasiCode Pro is Borg's on-door code change system. Unlike older Borg models that required removing a code disc, EasiCode Pro lets the code be changed at any time while the lock stays installed, using the dedicated button and supplied block pin. This makes the lock well suited to rental and strata applications where tenant codes must be changed regularly. The same block pin can also be fitted permanently to disable the external code-change function - useful where the code must be locked down and only changeable by someone with physical access to the lock internals.
EasiCode Pro is Borg's on-door code change system. Unlike older Borg models that required removing a code disc, EasiCode Pro lets the code be changed at any time while the lock stays installed, using the dedicated button and supplied block pin. This makes the lock well suited to rental and strata applications where tenant codes must be changed regularly. The same block pin can also be fitted permanently to disable the external code-change function - useful where the code must be locked down and only changeable by someone with physical access to the lock internals.
Yale/Schlage Key Override Cylinder
The Yale/Schlage 6-pin removable cylinder supplied with the BL2701SCECP is the standard key profile for the BL2700 ECP series. Keys can be duplicated at most locksmith workshops. If a restricted or master keyed profile is required, the supplied cylinder can be swapped for a compatible Yale/Schlage-profile cylinder - confirm fitment with your locksmith first. Duplicating or replacing cylinders is a job for a licensed locksmith; do not attempt to dismantle the cylinder housing, as this voids the warranty.
The Yale/Schlage 6-pin removable cylinder supplied with the BL2701SCECP is the standard key profile for the BL2700 ECP series. Keys can be duplicated at most locksmith workshops. If a restricted or master keyed profile is required, the supplied cylinder can be swapped for a compatible Yale/Schlage-profile cylinder - confirm fitment with your locksmith first. Duplicating or replacing cylinders is a job for a licensed locksmith; do not attempt to dismantle the cylinder housing, as this voids the warranty.
Anti-Thrust Deadlocking Latch
The BL2701 uses a deadlocking tubular latch with an anti-thrust pin. When the door closes fully, the latch bolt automatically deadlocks - preventing the bolt from being retracted by force using a card or flexible tool. For the deadlocking function to engage reliably, the strike plate must be correctly aligned and fully engaged with the latch bolt. See our guide on measuring your lock backset to confirm correct installation measurements before drilling.
The BL2701 uses a deadlocking tubular latch with an anti-thrust pin. When the door closes fully, the latch bolt automatically deadlocks - preventing the bolt from being retracted by force using a card or flexible tool. For the deadlocking function to engage reliably, the strike plate must be correctly aligned and fully engaged with the latch bolt. See our guide on measuring your lock backset to confirm correct installation measurements before drilling.
Why Buy Genuine Borg Over a Hardware Store Import
Genuine Borg locks carry logged, traceable spare parts and documentation, unlike many hardware-store imitations. See our guide on why our mech-digi range beats hardware store imitations for the full comparison, covering retrofit kits, keypad-only spares, and scar plates.
Genuine Borg locks carry logged, traceable spare parts and documentation, unlike many hardware-store imitations. See our guide on why our mech-digi range beats hardware store imitations for the full comparison, covering retrofit kits, keypad-only spares, and scar plates.
Borg Locks Warranty - 12 Months (Australia)
Borg Locks are warranted against defects in materials and workmanship for 12 months from the date of sale. The warranty does not cover damage from misuse, vandalism, or improper installation, and does not cover anything beyond the documented code change procedure. Locks must not be dismantled - dismantling voids the warranty. Warranty claims for products purchased through Terry's are managed by Terry's - contact the team directly to start a claim. This warranty operates alongside, and does not limit, your rights under Australian Consumer Law.
Borg Locks are warranted against defects in materials and workmanship for 12 months from the date of sale. The warranty does not cover damage from misuse, vandalism, or improper installation, and does not cover anything beyond the documented code change procedure. Locks must not be dismantled - dismantling voids the warranty. Warranty claims for products purchased through Terry's are managed by Terry's - contact the team directly to start a claim. This warranty operates alongside, and does not limit, your rights under Australian Consumer Law.
Download PDF Resources
Borg BL2700 ECP Non-Marine-Grade Brochure - BL2701ECP / BL2771ECP (PDF)
Series brochure covering the BL2701 ECP (single knob turn keypad) and BL2771 ECP (back-to-back keypads) - construction, buttons, finishes, fixings, cylinder, and full dimensions for both.
Series brochure covering the BL2701 ECP (single knob turn keypad) and BL2771 ECP (back-to-back keypads) - construction, buttons, finishes, fixings, cylinder, and full dimensions for both.
BL2000 ECP EasiCode Pro Installation Instructions V4 (PDF)
Installation and EasiCode Pro code-change instructions for the BL2000/BL2700 ECP platform.
Installation and EasiCode Pro code-change instructions for the BL2000/BL2700 ECP platform.
Borg BL2000 ECP Series Brochure (PDF)
Overview of the full BL2000 ECP electronic-code-change range, including the BL2701/BL2702 key-override models and combination counts.
Overview of the full BL2000 ECP electronic-code-change range, including the BL2701/BL2702 key-override models and combination counts.
Borg BL2000 Series Product Leaflet (PDF)
Wider BL2000-family overview leaflet (non-ECP base range) - useful background on the platform this ECP series is built on. [CONFIRM: leaflet uses legacy model numbering rather than current live SKUs.]
Wider BL2000-family overview leaflet (non-ECP base range) - useful background on the platform this ECP series is built on. [CONFIRM: leaflet uses legacy model numbering rather than current live SKUs.]
Frequently Asked Questions - BL2701SCECP
Fit and Compatibility
Will this lock fit my existing door hole?
The BL2701SCECP has a fixed 60mm backset, matching the vast majority of Australian residential and commercial doors. Measure your existing latch backset before ordering - see our backset measuring guide. If your door only has around 25-30mm of clearance, the narrow-stile BL2702SCECP is the better fit instead.
The BL2701SCECP has a fixed 60mm backset, matching the vast majority of Australian residential and commercial doors. Measure your existing latch backset before ordering - see our backset measuring guide. If your door only has around 25-30mm of clearance, the narrow-stile BL2702SCECP is the better fit instead.
What is the difference between this lock and the BL2201SCECP?
Both share the same EasiCode Pro keypad and 60mm tubular latch. The BL2201SCECP has holdback but no key override; the BL2701SCECP adds the Yale/Schlage mechanical key override as a backup entry path, which the BL2201SCECP does not have. If you don't need a mechanical key backup, the BL2201SCECP is the simpler option. See Item Code Family for the full comparison.
Both share the same EasiCode Pro keypad and 60mm tubular latch. The BL2201SCECP has holdback but no key override; the BL2701SCECP adds the Yale/Schlage mechanical key override as a backup entry path, which the BL2201SCECP does not have. If you don't need a mechanical key backup, the BL2201SCECP is the simpler option. See Item Code Family for the full comparison.
What is the difference between the Satin Chrome and Marine Grade Pro Black versions?
They share the same keypad, latch, key override and holdback function. BL2701MGPRO uses Borg's Marine Grade Pro coating and finish for improved corrosion resistance in coastal or exposed environments, while this Satin Chrome BL2701SCECP suits standard internal residential and light commercial doors. See Item Code Family.
They share the same keypad, latch, key override and holdback function. BL2701MGPRO uses Borg's Marine Grade Pro coating and finish for improved corrosion resistance in coastal or exposed environments, while this Satin Chrome BL2701SCECP suits standard internal residential and light commercial doors. See Item Code Family.
Can I use the BL2701SCECP on a gate?
This listing is built and rated for internal residential and light-commercial doors, not gates - it carries no outdoor weather rating or gate-specific hardware. See our Digital Mechanical Locks range for Borg's dedicated gate lock series if you need one for a gate application.
This listing is built and rated for internal residential and light-commercial doors, not gates - it carries no outdoor weather rating or gate-specific hardware. See our Digital Mechanical Locks range for Borg's dedicated gate lock series if you need one for a gate application.
Code, Keys and Servicing
How secure are 4,000+ code combinations compared to a standard door lock?
Over 4,000 possible PIN combinations gives a far larger keyspace than the 3-4 digit codes on many consumer keypads, while EasiCode Pro's on-door change means the active code can be rotated in seconds whenever tenants or staff change. Combined with the Yale/Schlage key override as a mechanical fallback, this is standard commercial-grade practice for a light-duty internal keypad lock.
Over 4,000 possible PIN combinations gives a far larger keyspace than the 3-4 digit codes on many consumer keypads, while EasiCode Pro's on-door change means the active code can be rotated in seconds whenever tenants or staff change. Combined with the Yale/Schlage key override as a mechanical fallback, this is standard commercial-grade practice for a light-duty internal keypad lock.
Is a spare external keypad available if mine is damaged?
Not as a discrete keypad-only SKU at this time - see Accessories and Spares for what is currently catalogued (spare latches, tumblers, gasket, scar plate and spindles). If your external keypad assembly needs replacing, contact Terry's and we will confirm current availability rather than guess.
Not as a discrete keypad-only SKU at this time - see Accessories and Spares for what is currently catalogued (spare latches, tumblers, gasket, scar plate and spindles). If your external keypad assembly needs replacing, contact Terry's and we will confirm current availability rather than guess.
Is the holdback function permanent, or can it be removed?
The holdback mechanism is fully removable. When activated it holds the inside handle open so occupants can pass freely without operating the handle on each entry or exit. If holdback is not required for your installation, the mechanism can be removed - instructions are included in the product documentation.
The holdback mechanism is fully removable. When activated it holds the inside handle open so occupants can pass freely without operating the handle on each entry or exit. If holdback is not required for your installation, the mechanism can be removed - instructions are included in the product documentation.
What happens if I lose all the keys and forget the code?
With both credentials lost, entry requires a locksmith to pick or drill the lock - there is no factory backdoor or reset code. Keeping the key override cylinder and a written code record in a safe place avoids this scenario.
With both credentials lost, entry requires a locksmith to pick or drill the lock - there is no factory backdoor or reset code. Keeping the key override cylinder and a written code record in a safe place avoids this scenario.
What's in the Box - BL2701SCECP
- 1 x BL2701 mechanical digital keypad assembly (external)
- 1 x inside knob assembly with holdback paddle handle
- 1 x Yale/Schlage 6-pin removable key override cylinder
- 3 x keys for key override cylinder
- 1 x 60mm deadlocking tubular latch assembly
- 1 x strike plate
- 1 x EasiCode Pro on-door code change mechanism
- 1 x code change block pin (used during code change; can also disable external code change function)
- 1 x set of fixings, including one 120mm sprung spindle
- 1 x installation instructions
Borg BL2701SCECP - Dimensions
Manufacturer dimensional drawing for the Borg BL2701SCECP. Refer to the drawing for keypad body and inside handle assembly measurements. Fixed 60mm backset; suits doors up to 60mm thick on standard fixings, or up to 85mm with the XL fixing kit (Part No. S227).
Latch dimensional drawing - 60mm fixed backset deadlocking tubular latch with 12.5mm bolt projection.
Borg BL2700 ECP Non-Marine-Grade Brochure - BL2701ECP / BL2771ECP
Page 1 - Series overview and features: on-door code change, key by-pass, optional holdback, over 4,000 combinations, reversible on site
Page 2 - Series options (tubular latch, holdback, keyed alike), technical information, and full dimensions
PDF Files - BL2701SCECP
Borg BL2700 ECP Non-Marine-Grade Brochure - BL2701ECP / BL2771ECP (PDF)
Series brochure covering the BL2701 ECP (single knob turn keypad) and BL2771 ECP (back-to-back keypads) - construction, buttons, finishes, fixings, cylinder, and full dimensions for both.
Series brochure covering the BL2701 ECP (single knob turn keypad) and BL2771 ECP (back-to-back keypads) - construction, buttons, finishes, fixings, cylinder, and full dimensions for both.
BL2000 ECP EasiCode Pro Installation Instructions V4 (PDF)
Installation and EasiCode Pro code-change instructions for the BL2000/BL2700 ECP platform.
Installation and EasiCode Pro code-change instructions for the BL2000/BL2700 ECP platform.
Borg BL2000 ECP Series Brochure (PDF)
Overview of the full BL2000 ECP electronic-code-change range, including the BL2701/BL2702 key-override models and combination counts.
Overview of the full BL2000 ECP electronic-code-change range, including the BL2701/BL2702 key-override models and combination counts.
Borg BL2000 Series Product Leaflet (PDF)
Wider BL2000-family overview leaflet (non-ECP base range) - useful background on the platform this ECP series is built on.
Wider BL2000-family overview leaflet (non-ECP base range) - useful background on the platform this ECP series is built on.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
