Borg BL2000ECPCK Easicode Pro Code Change Key - Suits 2000, 3000 and 4000 Series - Blue
The Borg BL2000ECPCK is the blue Easicode Pro code change key for Borg 2000, 3000 and 4000 Series mechanical digital locks. It presses into the star button on an Easicode Pro (ECP) keypad to start a code change on the door or gate, without removing the lock.
It suits Easicode Pro keypads only. A new Easicode Pro lock normally comes with a change key in the box, so this is the spare or replacement key.
Estimated Dispatch
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Usually ships same day if ordered before 11am AEST (excludes weekends and Queensland public holidays).
Key Features
- Genuine Borg Easicode Pro (ECP) code change key, in blue.
- Suits Borg 2000, 3000 and 4000 Series keypads with Easicode Pro - door locks, deadbolts, gate locks and replacement keypads.
- Presses into the hole in the star button and is held in while the new code is entered.
- Starts the on-door code change - the lock stays on the door or gate.
- Not for On The Bench (non-ECP) keypads.
What's in the Box
- 1 x Borg Easicode Pro code change key (blue)
Item Code Family - Borg Easicode Pro Code Change Keys
Compatible Locks
The BL2000ECPCK suits Borg 2000, 3000 and 4000 Series keypads with Easicode Pro. On our range that is the 20 locks and three replacement keypads below.
It does not suit On The Bench (non-ECP) models, which are recoded with the lock off the door - see the bench method. The 5000 Series Easicode Pro locks and the BL7701 take the BL5000ECPCK instead.
Full Specifications
Frequently Asked Questions
What is this key used for?
It starts the Easicode Pro on-door code change. With the door or gate open and the current code entered, the key presses fully into the hole in the star button and is held there while the old code is cleared with the C button and the new one entered. The steps differ a little between series, so follow the instruction sheet for your lock or our step by step code change guide.
It starts the Easicode Pro on-door code change. With the door or gate open and the current code entered, the key presses fully into the hole in the star button and is held there while the old code is cleared with the C button and the new one entered. The steps differ a little between series, so follow the instruction sheet for your lock or our step by step code change guide.
Does it suit On The Bench (non-ECP) Borg locks?
No. On The Bench locks are recoded with the lock off the door, not with this key - see the bench method. This key is for Easicode Pro keypads only.
No. On The Bench locks are recoded with the lock off the door, not with this key - see the bench method. This key is for Easicode Pro keypads only.
Does a new lock come with one?
Usually, yes - Borg's complete Easicode Pro locks normally come with a change key in the box, and the What's in the Box list on each lock's page shows what is supplied. This listing is a spare for the maintenance set, or a replacement for a lost key. Some replacement keypads are supplied without one.
Usually, yes - Borg's complete Easicode Pro locks normally come with a change key in the box, and the What's in the Box list on each lock's page shows what is supplied. This listing is a spare for the maintenance set, or a replacement for a lost key. Some replacement keypads are supplied without one.
Is it the same as the 5000 Series change key?
No. The BL5000ECPCK is the key for the 5000 Series Easicode Pro locks and the BL7701, where it fits over the code change button and turns. This key is for the 2000, 3000 and 4000 Series, where it presses into the hole in the star button.
No. The BL5000ECPCK is the key for the 5000 Series Easicode Pro locks and the BL7701, where it fits over the code change button and turns. This key is for the 2000, 3000 and 4000 Series, where it presses into the hole in the star button.
Additional Information
A tool, not a credential. The change key does not open the lock, and it cannot change the code on its own - the current code has to be entered first. Keep it with the maintenance set rather than at the door or gate.
Lost the key, or it will not go in? Our code change guide covers what to do when the Easicode Pro change key is lost and why you should never force the change key.
Confirm the lock is an Easicode Pro model. Borg marks its Easicode Pro models with ECP in the model code - Chapter 16 of our Buyer's Guide explains the naming. If you are unsure which key your lock takes, contact us with its model number.
New to the Borg mechanical digital range? Our guide MG Pro and ECP explained covers what Easicode Pro is, why on-door code change matters and how the three code change methods compare, and What is a mechanical digital lock? covers how the code is changed brand by brand. Lockwood vs Borg vs Carbine and why our mech-digi range beats hardware-store imitations cover the wider range and why spare parts matter. Our digital mechanical locks range lists the complete locks, and more spares are in other smart lock accessories.
Warranty
Borg Locks Warranty - 12 Months (Australia)
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
All Borg locks are warranted against mechanical defects in materials and workmanship under normal use and service for a minimum of 12 months from date of sale. The warranty does not cover damage arising from misuse, vandalism, or improper installation. The lock must not be dismantled - doing so will invalidate the warranty. Proof of purchase required for all claims.
Purchased through Terry's Tradies Pty Ltd or one of its associated trading names? Contact us first - we will manage your warranty claim with the Australian distributor (LSC) on your behalf. This warranty operates alongside your rights under the Australian Consumer Law.
Download PDF Resources
Borg BL2000 ECP Easicode Pro Instructions V4 (PDF)
Borg's two-page Easicode Pro sheet, applicable to all 2000 ECP models - the on-door code change with the change key in the star button, and spindle fitting and positioning. (Host lock document.)
Borg's two-page Easicode Pro sheet, applicable to all 2000 ECP models - the on-door code change with the change key in the star button, and spindle fitting and positioning. (Host lock document.)
Borg BL4000 ECP Series Code Change Instructions (PDF)
Two-page Easicode Pro on-door code change procedure - headed BL2000 ECP Series, with the banner "same method applies to BL4000 ECP Series" - plus the method for identifying a lost code. (Host lock document.)
Two-page Easicode Pro on-door code change procedure - headed BL2000 ECP Series, with the banner "same method applies to BL4000 ECP Series" - plus the method for identifying a lost code. (Host lock document.)
Borg 2000 Series Accessories (PDF)
The Australian distributor's one-page BL2000 Series accessories sheet - the keypad-only unit, Lockwood conversion kits and scar plates for the 2000 Series. It does not list the change key. (Host lock series document.)
The Australian distributor's one-page BL2000 Series accessories sheet - the keypad-only unit, Lockwood conversion kits and scar plates for the 2000 Series. It does not list the change key. (Host lock series document.)
Borg Servicing (PDF)
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
PDF Files - BL2000ECPCK
Borg BL2000 ECP Easicode Pro Instructions V4 (PDF)
Borg's two-page Easicode Pro sheet, applicable to all 2000 ECP models - the on-door code change with the change key in the star button, and spindle fitting and positioning. (Host lock document.)
Borg's two-page Easicode Pro sheet, applicable to all 2000 ECP models - the on-door code change with the change key in the star button, and spindle fitting and positioning. (Host lock document.)
Borg BL4000 ECP Series Code Change Instructions (PDF)
Two-page Easicode Pro on-door code change procedure - headed BL2000 ECP Series, with the banner "same method applies to BL4000 ECP Series" - plus the method for identifying a lost code. (Host lock document.)
Two-page Easicode Pro on-door code change procedure - headed BL2000 ECP Series, with the banner "same method applies to BL4000 ECP Series" - plus the method for identifying a lost code. (Host lock document.)
Borg 2000 Series Accessories (PDF)
The Australian distributor's one-page BL2000 Series accessories sheet - the keypad-only unit, Lockwood conversion kits and scar plates for the 2000 Series. It does not list the change key. (Host lock series document.)
The Australian distributor's one-page BL2000 Series accessories sheet - the keypad-only unit, Lockwood conversion kits and scar plates for the 2000 Series. It does not list the change key. (Host lock series document.)
Borg Servicing (PDF)
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
Borg's one-page servicing guide for its mechanical digital locks - the monthly clean with a light silicone-based lubricant and the yearly service with the lock off the door.
Borg Locks Warranty
Borg products sold in Australia are covered against mechanical defects in materials and workmanship under normal use and service. Warranty claims are handled by Terry's Tradies Pty Ltd and its associated websites, trading names, and subsidiaries.
Warranty Summary
What the Warranty Covers
- Mechanical defects in materials and workmanship
- Defects arising under normal use and service conditions
- Repair or replacement of defective units at the discretion of the Australian distributor (LSC)
What the Warranty Does Not Cover
- Damage arising from misuse, vandalism, or abuse
- Damage resulting from improper installation
- Locks that have been dismantled - dismantling invalidates the warranty
- Normal wear and tear
- Cosmetic damage not affecting function
How to Make a Claim
For full returns and warranty claim procedures, visit our Returns & Warranty page - this is kept up to date and is the authoritative reference for current claim steps.
- Contact Terry's Tradies Pty Ltd first if you purchased through us or one of its associated trading names - we will assess the issue and manage the warranty process with LSC on your behalf. You do not need to contact LSC or Borg Locks UK directly.
- Have your proof of purchase ready (receipt or order confirmation).
- Warranty claims for Borg products in Australia are processed through LSC, the authorised Australian importer and distributor. Where an item is returned to LSC, freight charges must be prepaid and the item returned within the warranty period.
- If LSC finds the returned item to be defective, it will be repaired or replaced, and a detailed assessment report is provided to the customer after examination.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. The Borg manufacturer warranty above operates alongside - and does not limit - these statutory rights.
Confused? Overwhelmed? We get it.
Choosing the right smart lock can be genuinely tricky - door types, backsets, app platforms, compatibility with your existing hardware... there is a lot to consider. We have decades of experience fitting locks of all types, including smart locks, and we are happy to help.
Our expert recommendation service is free. Upload a few photos of your door and describe what you need, and one of our qualified locksmiths will give you a personalised recommendation.
Get Your Free Recommendation →How it works - three easy steps:
1. Upload photos
A few clear shots of your door, lock and frame - inside and out.
2. We assess
Our locksmith reviews your setup and requirements - door type, weather exposure, how you want to use it.
3. You get a recommendation
A personalised recommendation tailored to your door, budget and needs. No pressure, no upsell.
Also useful while you are deciding:
